Skip to main content

Material TechnologyLaajuus (5 cr)

Code: TKKP0220

Credits

5 op

Teaching language

  • Finnish

Responsible person

  • Sami Koponen

Objective

Competence in Material Technology is needed in material selection, when analyzing material failures and selecting different production methods.
You will learn the basic terminology and diagrams and fracture surfaces related to basic material terminology. You will learn how the environment will affect on different materials and also the effect of material selection on sustainable development. You will be familiar with materials used in engineering, technical properties and most common applications. You also understand and the effects of different materials on the environment.

Knowledge and understanding;
You are familiar with materials used in engineering and how inner structure and changes in structure will affect material properties.You will understand the effect of environment in use of materials.

Investigations and information retrieval:
You have the ability to make information retrieval related to material technology. You can make experimental tests and work in laboratory environment.

Content

Material inner structure, mechanical properties and the effect of inner structure on properties. Effect of working and heat treatment on properties. Environmental effect on materials and the effect of materials on the environment. Material groups and laboratory work.

Qualifications

No prerequisite.

Assessment criteria, satisfactory (1)

Assessment is based on mid-term exams, assignments and laboratory work.

Sufficient (1): You are familiar with basic terminology, but you can not interpret diagrams and fracture surfaces. You know how environment affects materials.

Satisfactory (2): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not interpret them in practice.

Assessment criteria, good (3)

Good (3): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not benefit the knowledge when selecting materials and interpreting failures.

Very good (4): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge quite well when selecting materials and interpreting failures.

Assessment criteria, excellent (5)

Excellent (5): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge well when selecting materials and interpreting failures.

Enrollment

01.08.2024 - 22.08.2024

Timing

26.08.2024 - 18.12.2024

Number of ECTS credits allocated

5 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

20 - 40

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Sami Koponen
Groups
  • TKN24SM
    Konetekniikka (AMK)
  • ZJATKN24SM
    Avoin amk, Konetekniikka, Monimuoto

Objectives

Competence in Material Technology is needed in material selection, when analyzing material failures and selecting different production methods.
You will learn the basic terminology and diagrams and fracture surfaces related to basic material terminology. You will learn how the environment will affect on different materials and also the effect of material selection on sustainable development. You will be familiar with materials used in engineering, technical properties and most common applications. You also understand and the effects of different materials on the environment.

Knowledge and understanding;
You are familiar with materials used in engineering and how inner structure and changes in structure will affect material properties.You will understand the effect of environment in use of materials.

Investigations and information retrieval:
You have the ability to make information retrieval related to material technology. You can make experimental tests and work in laboratory environment.

Content

Material inner structure, mechanical properties and the effect of inner structure on properties. Effect of working and heat treatment on properties. Environmental effect on materials and the effect of materials on the environment. Material groups and laboratory work.

Learning materials and recommended literature

Lecture material
Koivisto Konetekniikan materiaalioppi, Edita Publishing, 2010, 12.-13.painos. ISBN: 978-951-37-5259-0

Teaching methods

Lectures
laboratory work
independent work .
Tasks

Lectures, learning tasks based on application. Learning assignments are done and returned both individually and in groups. Laboratory exercises.
Free-form anonymous feedback is collected in the middle of the course.

The implementation of the course is based on contact and distance learning. During the course, students work in groups on three assessed learning assignments, which are returned in writing. In addition, written assignments or returnable exercises to the online learning environment are performed independently. The course includes one laboratory day.

If the student has not attended the classes of the starting week and does not return the assignment 1 by the deadline of 30.8.2024, he/she will be removed from the course and will not be able to participate in this implementation.

The responsible and transparent use of AI applications is encouraged in this course. Instructions for using artificial intelligence can be found in chapter 3.2 (https://help.jamk.fi/raportointiohje/fi/3-kirjoittamisprosessi/tekoalyn-kaytto-oppimistehtavissa-ja-opinnaytetyossa/) of the thesis reporting instructions. If necessary, the instructions for each learning assignment contain more detailed information on how to use it in more detail in this course.

Exam dates and retake possibilities

Exam in the last contact lectures of the course. Two replays

Alternative completion methods

The course is based on contact learning and independent working.
The assessment of previous competence is made on the first contacts.

Student workload

Lectures 14 h,
laboratory work 3 h,
independent work 118 h.
A total of 135 h of learning work.

Further information for students

In addition to the midterm/exam results, the assessment of the course is based on graded learning tasks and laboratory reports.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Assessment is based on mid-term exams, assignments and laboratory work.

Sufficient (1): You are familiar with basic terminology, but you can not interpret diagrams and fracture surfaces. You know how environment affects materials.

Satisfactory (2): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not interpret them in practice.

Evaluation criteria, good (3-4)

Good (3): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not benefit the knowledge when selecting materials and interpreting failures.

Very good (4): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge quite well when selecting materials and interpreting failures.

Evaluation criteria, excellent (5)

Excellent (5): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge well when selecting materials and interpreting failures.

Prerequisites

No prerequisite.

Enrollment

01.08.2024 - 22.08.2024

Timing

26.08.2024 - 18.12.2024

Number of ECTS credits allocated

5 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

20 - 39

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Sami Koponen
Scheduling groups
  • Pienryhmä 1 (Capacity: 15. Open UAS: 0.)
  • Pienryhmä 2 (Capacity: 15. Open UAS: 0.)
  • Pienryhmä 3 (Capacity: 15. Open UAS: 0.)
  • Pienryhmä 4 (Capacity: 15. Open UAS: 0.)
  • Pienryhmä 5 (Capacity: 15. Open UAS: 0.)
Groups
  • TKN24SA
    Konetekniikka (AMK)
  • TKN24SB
    Konetekniikka (AMK)
  • TKN24S1
    Konetekniikka (AMK)
  • ZJATKN24S1
    Avoin amk, Konetekniikka, Päivä
Small groups
  • Scheduling group 1
  • Scheduling group 2
  • Scheduling group 3
  • Scheduling group 4
  • Scheduling group 5

Objectives

Competence in Material Technology is needed in material selection, when analyzing material failures and selecting different production methods.
You will learn the basic terminology and diagrams and fracture surfaces related to basic material terminology. You will learn how the environment will affect on different materials and also the effect of material selection on sustainable development. You will be familiar with materials used in engineering, technical properties and most common applications. You also understand and the effects of different materials on the environment.

Knowledge and understanding;
You are familiar with materials used in engineering and how inner structure and changes in structure will affect material properties.You will understand the effect of environment in use of materials.

Investigations and information retrieval:
You have the ability to make information retrieval related to material technology. You can make experimental tests and work in laboratory environment.

Content

Material inner structure, mechanical properties and the effect of inner structure on properties. Effect of working and heat treatment on properties. Environmental effect on materials and the effect of materials on the environment. Material groups and laboratory work.

Learning materials and recommended literature

Lecture materials.
Koivisto et al. Materials Science in Mechanical Engineering, Edita Publishing, 2010, 12th-13th edition. ISBN: 978-951-37-5259-0

Teaching methods

- Lectures
- Learning tasks
- Independent study
- Laboratory work


Lectures, learning tasks based on application. Learning assignments are done and returned both individually and in groups. Laboratory exercises.
Free-form anonymous feedback is collected in the middle of the course.

The implementation of the course is based on contact and distance learning (videos). During the course, students make learning assignments, which are returned as agreed. The course includes laboratory works.

If the student has not attended the classes of the starting week and does not return the assignment 1 by the deadline of 6.10.2024, he/she will be removed from the course and will not be able to participate in this implementation.

The responsible and transparent use of AI applications is encouraged in this course. Instructions for using artificial intelligence can be found in chapter 3.2 (https://help.jamk.fi/raportointiohje/fi/3-kirjoittamisprosessi/tekoalyn-kaytto-oppimistehtavissa-ja-opinnaytetyossa/) of the thesis reporting instructions. If necessary, the instructions for each learning assignment contain more detailed information on how to use it in more detail in this course.

Exam dates and retake possibilities

Three intermediate exams (as contacts) and two re-exams (as contacts).

Student workload

52h lectures, 3h laboratories and distance work 80h, of which 30h for independent learning tasks, 12h for preparing laboratory reports in groups and 38h for independent study.

Further information for students

In addition to the midterm/exam results, the assessment of the course is based on graded learning tasks and laboratory reports.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Assessment is based on mid-term exams, assignments and laboratory work.

Sufficient (1): You are familiar with basic terminology, but you can not interpret diagrams and fracture surfaces. You know how environment affects materials.

Satisfactory (2): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not interpret them in practice.

Evaluation criteria, good (3-4)

Good (3): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not benefit the knowledge when selecting materials and interpreting failures.

Very good (4): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge quite well when selecting materials and interpreting failures.

Evaluation criteria, excellent (5)

Excellent (5): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge well when selecting materials and interpreting failures.

Prerequisites

No prerequisite.

Enrollment

01.08.2023 - 24.08.2023

Timing

12.09.2023 - 15.01.2024

Number of ECTS credits allocated

5 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 48

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Sami Koponen
Scheduling groups
  • Pienryhmä 1 (Capacity: 45. Open UAS: 0.)
  • Pienryhmä 2 (Capacity: 45. Open UAS: 0.)
  • Pienryhmä 3 (Capacity: 45. Open UAS: 0.)
  • Pienryhmä 4 (Capacity: 45. Open UAS: 0.)
  • Pienryhmä 5 (Capacity: 45. Open UAS: 0.)
  • Pienryhmä 6 (Capacity: 45. Open UAS: 0.)
Groups
  • TKN23SB
    Konetekniikka (AMK)
  • ZJATKN23S1
    Avoin amk, Konetekniikka, Päivä
  • TKN23SA
    Konetekniikka (AMK)
Small groups
  • Scheduling group 1
  • Scheduling group 2
  • Scheduling group 3
  • Scheduling group 4
  • Scheduling group 5
  • Scheduling group 6

Objectives

Competence in Material Technology is needed in material selection, when analyzing material failures and selecting different production methods.
You will learn the basic terminology and diagrams and fracture surfaces related to basic material terminology. You will learn how the environment will affect on different materials and also the effect of material selection on sustainable development. You will be familiar with materials used in engineering, technical properties and most common applications. You also understand and the effects of different materials on the environment.

Knowledge and understanding;
You are familiar with materials used in engineering and how inner structure and changes in structure will affect material properties.You will understand the effect of environment in use of materials.

Investigations and information retrieval:
You have the ability to make information retrieval related to material technology. You can make experimental tests and work in laboratory environment.

Content

Material inner structure, mechanical properties and the effect of inner structure on properties. Effect of working and heat treatment on properties. Environmental effect on materials and the effect of materials on the environment. Material groups and laboratory work.

Learning materials and recommended literature

Luentomateriaalit.
Koivisto ym. Konetekniikan materiaalioppi, Edita Publishing, 2010, 12.-13.painos. ISBN: 978-951-37-5259-0

Teaching methods

Päivätoteutus
- Luentoja
- Oppimistehtäviä
- Itsenäistä opiskelua
- Laboratoriotöitä

Exam dates and retake possibilities

Kolme välikoetta (kontakteina) ja kaksi uusintatenttiä (kontakteina).

Student workload

52h luentoja, 3h laboratorioita ja etätyöskentelyä 80h, josta 30h itsenäisten oppimistehtävien tekoon, 12h laboratorioraporttien valmisteluun ryhmätyönä sekä 38h itsenäiseen opiskeluun.

Further information for students

Opintojakson arviointi perustuu välikoe/tenttitulosten lisäksi pisteytettäviin oppimistehtäviin ja laboratorioraportteihin.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Assessment is based on mid-term exams, assignments and laboratory work.

Sufficient (1): You are familiar with basic terminology, but you can not interpret diagrams and fracture surfaces. You know how environment affects materials.

Satisfactory (2): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not interpret them in practice.

Evaluation criteria, good (3-4)

Good (3): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not benefit the knowledge when selecting materials and interpreting failures.

Very good (4): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge quite well when selecting materials and interpreting failures.

Evaluation criteria, excellent (5)

Excellent (5): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge well when selecting materials and interpreting failures.

Prerequisites

No prerequisite.

Enrollment

01.08.2023 - 24.08.2023

Timing

21.08.2023 - 15.01.2024

Number of ECTS credits allocated

5 op

Virtual portion

3 op

Mode of delivery

40 % Face-to-face, 60 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 47

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Sami Koponen
Teacher in charge

Sami Koponen

Groups
  • ZJATKN23SM
    Avoin amk, Konetekniikka, Monimuoto
  • TKN23SM
    Konetekniikka (AMK)

Objectives

Competence in Material Technology is needed in material selection, when analyzing material failures and selecting different production methods.
You will learn the basic terminology and diagrams and fracture surfaces related to basic material terminology. You will learn how the environment will affect on different materials and also the effect of material selection on sustainable development. You will be familiar with materials used in engineering, technical properties and most common applications. You also understand and the effects of different materials on the environment.

Knowledge and understanding;
You are familiar with materials used in engineering and how inner structure and changes in structure will affect material properties.You will understand the effect of environment in use of materials.

Investigations and information retrieval:
You have the ability to make information retrieval related to material technology. You can make experimental tests and work in laboratory environment.

Content

Material inner structure, mechanical properties and the effect of inner structure on properties. Effect of working and heat treatment on properties. Environmental effect on materials and the effect of materials on the environment. Material groups and laboratory work.

Learning materials and recommended literature

Luentomateriaalit.
Koivisto ym. Konetekniikan materiaalioppi, Edita Publishing, 2010, 12.-13.painos. ISBN: 978-951-37-5259-0

Teaching methods

Monimuotototeutus
- Itsenäistä opiskelua
- Luentoja
- Oppimistehtäviä
- Laboratoriotöitä

Exam dates and retake possibilities

Tentti ja kaksi uusintaa (kontakteina/etänä).

Student workload

14h luentoja, 3h laboratoriotunteja ja itsenäistä työskentelyä 118h.

Further information for students

Opintojakson arviointi perustuu välikoe/tenttitulosten lisäksi pisteytettäviin oppimistehtäviin ja laboratorioraportteihin.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Assessment is based on mid-term exams, assignments and laboratory work.

Sufficient (1): You are familiar with basic terminology, but you can not interpret diagrams and fracture surfaces. You know how environment affects materials.

Satisfactory (2): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not interpret them in practice.

Evaluation criteria, good (3-4)

Good (3): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not benefit the knowledge when selecting materials and interpreting failures.

Very good (4): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge quite well when selecting materials and interpreting failures.

Evaluation criteria, excellent (5)

Excellent (5): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge well when selecting materials and interpreting failures.

Prerequisites

No prerequisite.

Enrollment

01.08.2022 - 25.08.2022

Timing

22.08.2022 - 23.01.2023

Number of ECTS credits allocated

5 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 80

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Janne Sundelin
Teacher in charge

Janne Sundelin

Scheduling groups
  • Labraryhmä 1 (Capacity: 45. Open UAS: 0.)
  • Labraryhmä 2 (Capacity: 45. Open UAS: 0.)
  • Labraryhmä 3 (Capacity: 45. Open UAS: 0.)
  • Labraryhmä 4 (Capacity: 45. Open UAS: 0.)
  • Labraryhmä 5 (Capacity: 45. Open UAS: 0.)
Groups
  • TKN22S1
    Konetekniikka (AMK)
  • ZJATKN22S1
    Avoin amk, Konetekniikka, Päivä
Small groups
  • Labraryhmä 1
  • Labraryhmä 2
  • Labraryhmä 3
  • Labraryhmä 4
  • Labraryhmä 5

Objectives

Competence in Material Technology is needed in material selection, when analyzing material failures and selecting different production methods.
You will learn the basic terminology and diagrams and fracture surfaces related to basic material terminology. You will learn how the environment will affect on different materials and also the effect of material selection on sustainable development. You will be familiar with materials used in engineering, technical properties and most common applications. You also understand and the effects of different materials on the environment.

Knowledge and understanding;
You are familiar with materials used in engineering and how inner structure and changes in structure will affect material properties.You will understand the effect of environment in use of materials.

Investigations and information retrieval:
You have the ability to make information retrieval related to material technology. You can make experimental tests and work in laboratory environment.

Content

Material inner structure, mechanical properties and the effect of inner structure on properties. Effect of working and heat treatment on properties. Environmental effect on materials and the effect of materials on the environment. Material groups and laboratory work.

Learning materials and recommended literature

Luentomateriaali.
Koivisto ym. Konetekniikan materiaalioppi, Edita Publishing, 2010, 12.-13.painos. ISBN: 978-951-37-5259-0

Teaching methods

Luennot ja oppimistehtävät sekä laboratoriotyöt.
Opintojaksosta kerätään sen puolivälissä vapaamuotoinen anonyymi palaute.

Exam dates and retake possibilities

Kolme välikoetta (kontakteina) ja kaksi opintojakson uusintaa (kontakteina).

Student workload

50h luentoja, 6h laboratorioita ja etätyöskentelyä 79h, josta 46h itsenäisten oppimistehtävien tekoon, 8h laboratorioiden toimeksiantojen tekoon ryhmätyönä ja 25 h itsenäiseen opiskeluun.

Further information for students

Oppimistehtävissä jatkuva kehittävä palaute.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Assessment is based on mid-term exams, assignments and laboratory work.

Sufficient (1): You are familiar with basic terminology, but you can not interpret diagrams and fracture surfaces. You know how environment affects materials.

Satisfactory (2): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not interpret them in practice.

Evaluation criteria, good (3-4)

Good (3): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not benefit the knowledge when selecting materials and interpreting failures.

Very good (4): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge quite well when selecting materials and interpreting failures.

Evaluation criteria, excellent (5)

Excellent (5): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge well when selecting materials and interpreting failures.

Prerequisites

No prerequisite.

Enrollment

01.08.2022 - 25.08.2022

Timing

15.08.2022 - 31.12.2022

Number of ECTS credits allocated

5 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 80

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Janne Sundelin
Teacher in charge

Janne Sundelin

Groups
  • TKN22SM
    Konetekniikka (AMK)

Objectives

Competence in Material Technology is needed in material selection, when analyzing material failures and selecting different production methods.
You will learn the basic terminology and diagrams and fracture surfaces related to basic material terminology. You will learn how the environment will affect on different materials and also the effect of material selection on sustainable development. You will be familiar with materials used in engineering, technical properties and most common applications. You also understand and the effects of different materials on the environment.

Knowledge and understanding;
You are familiar with materials used in engineering and how inner structure and changes in structure will affect material properties.You will understand the effect of environment in use of materials.

Investigations and information retrieval:
You have the ability to make information retrieval related to material technology. You can make experimental tests and work in laboratory environment.

Content

Material inner structure, mechanical properties and the effect of inner structure on properties. Effect of working and heat treatment on properties. Environmental effect on materials and the effect of materials on the environment. Material groups and laboratory work.

Learning materials and recommended literature

Luentomateriaali.
Koivisto ym. Konetekniikan materiaalioppi, Edita Publishing, 2010, 12.-13.painos. ISBN: 978-951-37-5259-0

Teaching methods

Luennot ja oppimistehtävät sekä laboratoriotyöt. Opintojaksosta kerätään sen puolivälissä vapaamuotoinen anonyymi palaute.

Exam dates and retake possibilities

Tentti ja kaksi uusintaa (kontakteina).

Student workload

Monimuotototeutuksessa 14 h luentoja, 2 h laboratoriotunteja ja itsenäistä työskentelyä 113 h, joista 50 h 10 oppimistehtävän tekoon.

Further information for students

Opintojakson arviointi perustuu tenttitulosten lisäksi pisteytettäviin oppimistehtäviin ja laboratorioraportteihin.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Assessment is based on mid-term exams, assignments and laboratory work.

Sufficient (1): You are familiar with basic terminology, but you can not interpret diagrams and fracture surfaces. You know how environment affects materials.

Satisfactory (2): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not interpret them in practice.

Evaluation criteria, good (3-4)

Good (3): You are familiar with basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials, but you can not benefit the knowledge when selecting materials and interpreting failures.

Very good (4): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge quite well when selecting materials and interpreting failures.

Evaluation criteria, excellent (5)

Excellent (5): You master basic terminology, you can interpret diagrams and fracture surfaces and you are familiar with environmental affects on materials. You can benefit the knowledge well when selecting materials and interpreting failures.

Prerequisites

No prerequisite.