Timber Structures 1Laajuus (5 cr)
Code: TRRSP005
Credits
5 op
Teaching language
- Finnish
Responsible person
- Marko Viinikainen
Objective
Object of the course:
The knowledge and skills you get on this course you will need in order to design wood structures of the common grade buildings, as well as you know the essentials of manufacturing and installing wooden structures.
Course competences:
- Mathematic and Natural science competence
- Technological competence
The learning objectives of the course:
You can tell about the structural properties of wood and its construction products and their use. You will be able to design common grade wood structures at ultimate-state- and service-state and designing of nail- and screw joints. You can design stiffening of the load-bearing frame of a building.
These are also the basic tasks of the course.
Content
Wood as a structural material, dimensioning of structures: beams, pillars, plate stiffening, vibration of floor structure, joints of structural components
Qualifications
Basics of House Building, Strength of structural Materials
Assessment criteria, satisfactory (1)
Passable (1): The student recognizes all of the learning objectives, understands the meaning of them and is able to perform the basic tasks described in the learning objectives of the course.
Satisfying (2): In addition to previous skills, the student can systematically describe the issues of the course.
Assessment criteria, good (3)
Good (3): In addition to previous skills, the student can describe the influences of various solutions and can make reasoned choices between alternatives.
Laudable (4): In addition to previous skills, the student can apply the learned issues independently and is able to evaluate done solutions.
Assessment criteria, excellent (5)
Excellent ( 5 ): In addition to previous skills, the student shows deep knowledge of course contents as well as ability to parse and wider analyze the influences of solutions.
Further information
Studification:
The Student has to show that he masters the learning objectives of the course with proof, such as f.eg. certificate of earlier degrees, documents made in working life and performances supplemented with statements.
Qualifications:
The course is part of studies that belong to qualifications of civil engineer (Ministry of the Environment guidelines on the difficulty classes of design tasks YM1/601/2015).
The studies follow guidelines of curriculum performed in cooperation with Universities of applied sciences and construction industry in 2017.
Enrollment
01.08.2024 - 22.08.2024
Timing
26.08.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
20 - 53
Degree programmes
- Bachelor's Degree Programme in Construction and Civil Engineering
Teachers
- Marko Viinikainen
Groups
-
TRY22S1Rakennus- ja yhdyskuntatekniikka (AMK)
Objectives
Object of the course:
The knowledge and skills you get on this course you will need in order to design wood structures of the common grade buildings, as well as you know the essentials of manufacturing and installing wooden structures.
Course competences:
- Mathematic and Natural science competence
- Technological competence
The learning objectives of the course:
You can tell about the structural properties of wood and its construction products and their use. You will be able to design common grade wood structures at ultimate-state- and service-state and designing of nail- and screw joints. You can design stiffening of the load-bearing frame of a building.
These are also the basic tasks of the course.
Content
Wood as a structural material, dimensioning of structures: beams, pillars, plate stiffening, vibration of floor structure, joints of structural components
Time and location
Contact lessons according to Time Table on the Main Campus.
Learning materials and recommended literature
Eurokoodi 5 Lyhennetty suunnitteluohje 5. painos 2020 (saatavilla: https://puuinfo.fi/suunnittelu/ohjeet/eurokoodi-5-lyhennetty-suunnitteluohje/)
RIL 205-1-2017 Puurakenteiden suunnitteluohje on standardin SFS-EN 1995-1-1 Puurakenteiden suunnittelu. Osa 1-1: Yleiset säännöt ja rakennuksia koskevat säännöt suunnitteluohje. ISBN: 978-951-758-604-7
Teaching methods
The course uses the following teaching methods:
- Lectures
- Learning tasks
Assignments carried out as group work or alone (designing the load-bearing wooden frame of a detached house) are central to learning. The assignment begins at the beginning of the course and it is a good idea to carry it out throughout the course as the teaching progresses.
Students will receive guidance
- feedback on assignments
- feedback on exams
Practical training and working life connections
Excursions if possible,
Company visits at School if possible
etc..
Exam dates and retake possibilities
Timing of Exams and re-Exams will be agreed on the first contact lesson of the course.
The course orientation task must be taken within three ( 3 ) weeks of the course start date in order to maintain the right to study.
Alternative completion methods
Certification or accreditation is possible as described in the Jamkin Peppi guidelines.
Student workload
One credit point means an average of 27 hours of work. The load is distributed in different ways depending on the way the course is implemented.
-------------------
In this study period, time use and workload is distributed as follows:
Total load: 135 h
Contact lectures: 60 h
Homework that supports learning: 60 h
Preparing for exam: 10-20 h
Allocate approx. 3-6 hrs/week of your own time for this course.
Further information for students
Grading methods
- Test,
- Learning assignments,
- Self Grading.
Assessment is developmental, continuous, competency-based, high-quality and criterion-referenced, and student self-assessment plays an important role in that.
See also Grading
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Passable (1): The student recognizes all of the learning objectives, understands the meaning of them and is able to perform the basic tasks described in the learning objectives of the course.
Satisfying (2): In addition to previous skills, the student can systematically describe the issues of the course.
Evaluation criteria, good (3-4)
Good (3): In addition to previous skills, the student can describe the influences of various solutions and can make reasoned choices between alternatives.
Laudable (4): In addition to previous skills, the student can apply the learned issues independently and is able to evaluate done solutions.
Evaluation criteria, excellent (5)
Excellent ( 5 ): In addition to previous skills, the student shows deep knowledge of course contents as well as ability to parse and wider analyze the influences of solutions.
Prerequisites
Basics of House Building, Strength of structural Materials
Further information
Studification:
The Student has to show that he masters the learning objectives of the course with proof, such as f.eg. certificate of earlier degrees, documents made in working life and performances supplemented with statements.
Qualifications:
The course is part of studies that belong to qualifications of civil engineer (Ministry of the Environment guidelines on the difficulty classes of design tasks YM1/601/2015).
The studies follow guidelines of curriculum performed in cooperation with Universities of applied sciences and construction industry in 2017.
Enrollment
01.08.2023 - 24.08.2023
Timing
28.08.2023 - 19.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Bachelor's Degree Programme in Construction and Civil Engineering
Teachers
- Marko Viinikainen
Groups
-
TRY21S1Rakennus- ja yhdyskuntatekniikka (AMK)
Objectives
Object of the course:
The knowledge and skills you get on this course you will need in order to design wood structures of the common grade buildings, as well as you know the essentials of manufacturing and installing wooden structures.
Course competences:
- Mathematic and Natural science competence
- Technological competence
The learning objectives of the course:
You can tell about the structural properties of wood and its construction products and their use. You will be able to design common grade wood structures at ultimate-state- and service-state and designing of nail- and screw joints. You can design stiffening of the load-bearing frame of a building.
These are also the basic tasks of the course.
Content
Wood as a structural material, dimensioning of structures: beams, pillars, plate stiffening, vibration of floor structure, joints of structural components
Learning materials and recommended literature
- tuntimuistiinpanot
- Puurakenteiden suunnitteluohje. Lyhennetty suunnitteluohje. Puuinfo. Viides painos
- RIL 205-1-2017 Puurakenteiden suunnitteluohje
- muu opintojakson verkkoalustalla jaettava materiaali
Teaching methods
- Luennot
- Oppimistehtävät
- Harjoitustyö
Student workload
- Luennot 52 h
- Itsenäinen työskentely 83 h
( sisältäen mm: harjoitustyö, oppimistehtävät, tenttiin valmistautuminen)
- Yhteensä 135 h
Further information for students
Arviointimenetelmät:
- Kurssikoe tai uusintatentti (50%)
- Harjoitustyö (50%)
- Jatkuva näyttö
- Itsearviointi
Arviointi on osaamistavoitteisiin pohjautuvaa, laadullista ja kriteeriperusteista. Opiskelijan itsearvioinnilla on tärkeä rooli arvioinnissa.
Ks. myös Arviointi
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Passable (1): The student recognizes all of the learning objectives, understands the meaning of them and is able to perform the basic tasks described in the learning objectives of the course.
Satisfying (2): In addition to previous skills, the student can systematically describe the issues of the course.
Evaluation criteria, good (3-4)
Good (3): In addition to previous skills, the student can describe the influences of various solutions and can make reasoned choices between alternatives.
Laudable (4): In addition to previous skills, the student can apply the learned issues independently and is able to evaluate done solutions.
Evaluation criteria, excellent (5)
Excellent ( 5 ): In addition to previous skills, the student shows deep knowledge of course contents as well as ability to parse and wider analyze the influences of solutions.
Prerequisites
Basics of House Building, Strength of structural Materials
Further information
Studification:
The Student has to show that he masters the learning objectives of the course with proof, such as f.eg. certificate of earlier degrees, documents made in working life and performances supplemented with statements.
Qualifications:
The course is part of studies that belong to qualifications of civil engineer (Ministry of the Environment guidelines on the difficulty classes of design tasks YM1/601/2015).
The studies follow guidelines of curriculum performed in cooperation with Universities of applied sciences and construction industry in 2017.
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 21.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Construction and Civil Engineering
Teachers
- Marko Viinikainen
Teacher in charge
Marko Viinikainen
Groups
-
TRY20S1Bachelor's Degree Programme in Construction and Civil Engineering
Objectives
Object of the course:
The knowledge and skills you get on this course you will need in order to design wood structures of the common grade buildings, as well as you know the essentials of manufacturing and installing wooden structures.
Course competences:
- Mathematic and Natural science competence
- Technological competence
The learning objectives of the course:
You can tell about the structural properties of wood and its construction products and their use. You will be able to design common grade wood structures at ultimate-state- and service-state and designing of nail- and screw joints. You can design stiffening of the load-bearing frame of a building.
These are also the basic tasks of the course.
Content
Wood as a structural material, dimensioning of structures: beams, pillars, plate stiffening, vibration of floor structure, joints of structural components
Learning materials and recommended literature
- tuntimuistiinpanot
- Puurakenteiden suunnitteluohje. Lyhennetty suunnitteluohje. Puuinfo. Viides painos
- RIL 205-1-2017 Puurakenteiden suunnitteluohje
- muu opintojakson verkkoalustalla jaettava materiaali
Teaching methods
- Lectures face-to-face / Online Lectures,
- Assignments / Learning assignments
Exam dates and retake possibilities
Will be agreed on the first contact lesson of the course.
Alternative completion methods
Studification: See the Despcription of Module.
Student workload
- Lectures 65 h
- Independent Work 70 h.
( including among others: Learning assignments, Home Works, preparing for Test)
- Total 135 h
Further information for students
Grading methods
- Test
- Assignments / Learning assignments,
- Continuing Grading
- Self Grading
The Grading is high-quality and it is based on the learning objectives and criterion of the course.
Self Grading has an important role in Student's Grading.
See also Grading
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Passable (1): The student recognizes all of the learning objectives, understands the meaning of them and is able to perform the basic tasks described in the learning objectives of the course.
Satisfying (2): In addition to previous skills, the student can systematically describe the issues of the course.
Evaluation criteria, good (3-4)
Good (3): In addition to previous skills, the student can describe the influences of various solutions and can make reasoned choices between alternatives.
Laudable (4): In addition to previous skills, the student can apply the learned issues independently and is able to evaluate done solutions.
Evaluation criteria, excellent (5)
Excellent ( 5 ): In addition to previous skills, the student shows deep knowledge of course contents as well as ability to parse and wider analyze the influences of solutions.
Prerequisites
Basics of House Building, Strength of structural Materials
Further information
Studification:
The Student has to show that he masters the learning objectives of the course with proof, such as f.eg. certificate of earlier degrees, documents made in working life and performances supplemented with statements.
Qualifications:
The course is part of studies that belong to qualifications of civil engineer (Ministry of the Environment guidelines on the difficulty classes of design tasks YM1/601/2015).
The studies follow guidelines of curriculum performed in cooperation with Universities of applied sciences and construction industry in 2017.