CAD - Basics of ModellingLaajuus (5 cr)
Code: TRRP0002
Credits
5 op
Teaching language
- Finnish
- English
Responsible person
- Hannu Haapamaa
Objective
Object of the course:
The knowledge and skills you get on this course you will need in order to produce architectural and structural drawings using computer.
Course competences:
- Technological competence
The learning objectives of the course:
You can produce drawings of buildings using computer (f.eg. CAD and BIM), you know drawing symbols and you can produce architectural and structural drawings using modeling and drawing programs. These are also the basic tasks of the course.
Content
Basics of CAD, basics of modeling, exercise and learning tasks, architectural and structural drawings.
Qualifications
-
Assessment criteria, satisfactory (1)
Passable (1): The student recognizes all of the learning objectives, understands the meaning of them and is able to perform the basic tasks described in the learning objectives of the course.
Satisfying (2): In addition to previous skills, the student can systematically describe the issues of the course.
Assessment criteria, good (3)
Good (3): In addition to previous skills, the student can describe the influences of various solutions and can make reasoned choices between alternatives.
Laudable (4): In addition to previous skills, the student can apply the learned issues independently and is able to evaluate done solutions.
Assessment criteria, excellent (5)
Excellent ( 5 ): In addition to previous skills, the student shows deep knowledge of course contents as well as ability to parse and wider analyze the influences of solutions.
Enrollment
01.08.2023 - 24.08.2023
Timing
28.08.2023 - 31.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 55
Degree programmes
- Bachelor's Degree Programme in Construction and Civil Engineering
Teachers
- Hannu Haapamaa
Scheduling groups
- TRY23SA (Capacity: 30. Open UAS: 0.)
- TRY23SB (Capacity: 30. Open UAS: 0.)
Groups
-
ZJAG23STRAvoin AMK,Korkeakoulupolku, Korkeakoulupolku, Rakennus, Gradia
-
TRY23S1Rakennus- ja yhdyskuntatekniikka (AMK)
-
ZJATRY23S1Avoin amk, Rakennus- ja yhdyskuntatekniikka, Päivä
Small groups
- TRY23SA
- TRY23SB
Objectives
Object of the course:
The knowledge and skills you get on this course you will need in order to produce architectural and structural drawings using computer.
Course competences:
- Technological competence
The learning objectives of the course:
You can produce drawings of buildings using computer (f.eg. CAD and BIM), you know drawing symbols and you can produce architectural and structural drawings using modeling and drawing programs. These are also the basic tasks of the course.
Content
Basics of CAD, basics of modeling, exercise and learning tasks, architectural and structural drawings.
Learning materials and recommended literature
AutoCAD manuals
Teaching videos
Teaching methods
- Lectures face-to-face / Online Lectures,
- Assignments / Learning assignments,
- Seminars / Workshops
- Teaching Videos
- etc.
Practical training and working life connections
Will be agreed on the first contact lesson of the course.
Exam dates and retake possibilities
Will be agreed on the first contact lesson of the course.
International connections
The first part (3 ECTS) at first Autumn will be in Finnish and English.
The second part (2 ECTS) at first Spring will be taught in Finnish and English.
Alternative completion methods
Studification: See the Despcription of Module.
Student workload
Load of Part 1 (first Autumn) (3 ECTS):
- Lectures 40 h
- Independent Work 40 h.
( including among others: Learning assignments, Home Works, preparing for Test)
- Total 80 h
Load of Part 2 (first Spring) (2 ECTS):
- Lectures 26 h
- Independent Work 27 h.
( including among others: Learning assignments, Home Works, preparing for Test)
- Total 54 h
Further information for students
Grading methods
- Test (At the End of Part two)
- Assignments / Learning assignments,
- Continuing Grading
- Self Grading
The Grading is high-quality and it is based on the learning objectives and criterion of the course.
Self Grading has an important role in Student's Grading.
See also Grading
Open UAS 5 students.
This is the first part , CAD1 3 ECTS, of the total course 5 ECTS.
(The second part, CAD2 2 ECTS, will be on the 1nd Spring.)
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Passable (1): The student recognizes all of the learning objectives, understands the meaning of them and is able to perform the basic tasks described in the learning objectives of the course.
Satisfying (2): In addition to previous skills, the student can systematically describe the issues of the course.
Evaluation criteria, good (3-4)
Good (3): In addition to previous skills, the student can describe the influences of various solutions and can make reasoned choices between alternatives.
Laudable (4): In addition to previous skills, the student can apply the learned issues independently and is able to evaluate done solutions.
Evaluation criteria, excellent (5)
Excellent ( 5 ): In addition to previous skills, the student shows deep knowledge of course contents as well as ability to parse and wider analyze the influences of solutions.
Prerequisites
-
Enrollment
01.08.2022 - 25.08.2022
Timing
22.08.2022 - 31.05.2023
Number of ECTS credits allocated
5 op
Virtual portion
3 op
RDI portion
5 op
Mode of delivery
40 % Face-to-face, 60 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor's Degree Programme in Construction and Civil Engineering
Teachers
- Hannu Haapamaa
Teacher in charge
Hannu Haapamaa
Scheduling groups
- TRY22SA (Capacity: 30. Open UAS: 0.)
- TRY22SB (Capacity: 30. Open UAS: 0.)
Groups
-
ZJATRY22S1Avoin amk, Rakennus- ja yhdyskuntatekniikka, Päivä
-
TRY22S1Rakennus- ja yhdyskuntatekniikka (AMK)
-
ZJAG22STRAvoin AMK,Korkeakoulupolku, Korkeakoulupolku, Rakennus, Gradia
Small groups
- TRY22SA
- TRY22SB
Objectives
Object of the course:
The knowledge and skills you get on this course you will need in order to produce architectural and structural drawings using computer.
Course competences:
- Technological competence
The learning objectives of the course:
You can produce drawings of buildings using computer (f.eg. CAD and BIM), you know drawing symbols and you can produce architectural and structural drawings using modeling and drawing programs. These are also the basic tasks of the course.
Content
Basics of CAD, basics of modeling, exercise and learning tasks, architectural and structural drawings.
Learning materials and recommended literature
AutoCAD manuals
Teaching videos
Teaching methods
- Lectures face-to-face / Online Lectures,
- Assignments / Learning assignments,
- Seminars / Workshops
- Teaching Videos
- etc.
Practical training and working life connections
Will be agreed on the first contact lesson of the course.
Exam dates and retake possibilities
Will be agreed on the first contact lesson of the course.
International connections
The first part (3 ECTS) at first Autumn will be in Finnish and English.
The second part (2 ECTS) at first Spring will be taught in Finnish and English.
Alternative completion methods
Studification: See the Despcription of Module.
Student workload
Load of Part 1 (first Autumn) (3 ECTS):
- Lectures 40 h
- Independent Work 40 h.
( including among others: Learning assignments, Home Works, preparing for Test)
- Total 80 h
Load of Part 2 (first Spring) (2 ECTS):
- Lectures 26 h
- Independent Work 27 h.
( including among others: Learning assignments, Home Works, preparing for Test)
- Total 54 h
Further information for students
Grading methods
- Test (At the End of Part two)
- Assignments / Learning assignments,
- Continuing Grading
- Self Grading
The Grading is high-quality and it is based on the learning objectives and criterion of the course.
Self Grading has an important role in Student's Grading.
See also Grading
Open UAS 5 students.
This is the first part , CAD1 3 ECTS, of the total course 5 ECTS.
(The second part, CAD2 2 ECTS, will be on the 1nd Spring.)
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Passable (1): The student recognizes all of the learning objectives, understands the meaning of them and is able to perform the basic tasks described in the learning objectives of the course.
Satisfying (2): In addition to previous skills, the student can systematically describe the issues of the course.
Evaluation criteria, good (3-4)
Good (3): In addition to previous skills, the student can describe the influences of various solutions and can make reasoned choices between alternatives.
Laudable (4): In addition to previous skills, the student can apply the learned issues independently and is able to evaluate done solutions.
Evaluation criteria, excellent (5)
Excellent ( 5 ): In addition to previous skills, the student shows deep knowledge of course contents as well as ability to parse and wider analyze the influences of solutions.
Prerequisites
-
Enrollment
02.08.2021 - 05.09.2021
Timing
30.08.2021 - 20.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor's Degree Programme in Construction and Civil Engineering
Teachers
- Hannu Haapamaa
Teacher in charge
Hannu Haapamaa
Groups
-
ZJA21STGRAvoin amk, Korkeakoulupolkuopinnot, Gradia, Rakennus-ja yhdyskuntatekniikka
-
TRY21S1Rakennus- ja yhdyskuntatekniikka (AMK)
-
ZJA21STPPRYAvoin amk, tekniikka, Rakennus- ja yhdyskuntatekniikka, päivä
Objectives
Object of the course:
The knowledge and skills you get on this course you will need in order to produce architectural and structural drawings using computer.
Course competences:
- Technological competence
The learning objectives of the course:
You can produce drawings of buildings using computer (f.eg. CAD and BIM), you know drawing symbols and you can produce architectural and structural drawings using modeling and drawing programs. These are also the basic tasks of the course.
Content
Basics of CAD, basics of modeling, exercise and learning tasks, architectural and structural drawings.
Learning materials and recommended literature
AutoCAD manuals
Teaching videos
Teaching methods
- Lectures face-to-face / Online Lectures,
- Assignments / Learning assignments,
- Seminars / Workshops
- Teaching Videos
- etc.
Practical training and working life connections
Will be agreed on the first contact lesson of the course.
Exam dates and retake possibilities
Will be agreed on the first contact lesson of the course.
International connections
The first part (3 ECTS) at first Autumn will be in Finnish and English.
The second part (2 ECTS) at first Spring will be taught in Finnish and English.
Alternative completion methods
Studification: See the Despcription of Module.
Student workload
Load of the first Autumn (3 ECTS):
- Lectures 40 h
- Independent Work 40 h.
( including among others: Learning assignments, Home Works, preparing for Test)
- Total 80 h
Further information for students
Grading methods
- Test
- Assignments / Learning assignments,
- Continuing Grading
- Self Grading
The Grading is high-quality and it is based on the learning objectives and criterion of the course.
Self Grading has an important role in Student's Grading.
See also Grading
Open UAS 5 students.
This is the first part , CAD1 3 ECTS, of the total course 5 ECTS.
(The second part, CAD2 2 ECTS, will be on the 1nd Spring.)
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Passable (1): The student recognizes all of the learning objectives, understands the meaning of them and is able to perform the basic tasks described in the learning objectives of the course.
Satisfying (2): In addition to previous skills, the student can systematically describe the issues of the course.
Evaluation criteria, good (3-4)
Good (3): In addition to previous skills, the student can describe the influences of various solutions and can make reasoned choices between alternatives.
Laudable (4): In addition to previous skills, the student can apply the learned issues independently and is able to evaluate done solutions.
Evaluation criteria, excellent (5)
Excellent ( 5 ): In addition to previous skills, the student shows deep knowledge of course contents as well as ability to parse and wider analyze the influences of solutions.
Prerequisites
-