Phys1 Force and Motion (TZLF1300)

Phys1 Force and Motion, 3 cr - TZLF1300

Phys1 Force and Motion (TZLF1300-3074), 08.01.2024 – 30.04.2024,
3 cr (TTV23S2, ...) — Face-to-face + -
Language of instruction

Finnish

Timing

08.01.2024 - 30.04.2024

Lecturer(s)

Pekka Varis

Planned learning activities, teaching methods and guidance

Kontaktiopetus 2 h/viikko, joissa luentoa ja laskuharjoituksia.
Viikoittaiset kotitehtävät.
Itsenäistä opiskelua varten on olemassa luentovideot. (not translated)

Learning materials and recommended literature

Opettajan oppimisympäristössä jakama kirjallinen materiaali ja videomateriaali. (not translated)

Campus

Lutakko Campus

Exam dates and re-exam possibilities

Julkaistaan opintojakson alussa oppimisympäristössä. (not translated)

Learning assignments and student workload

Luennot + laskuharjoitukset n. 25 h
Itsenäinen opiskelu ja kotitehtävät 50 h
Tentti 3 h
Kuormitus on tasainen koko opintojakson ajan, yhteensä 80 h. (not translated)

Enrollment

20.11.2023 - 04.01.2024
Groups
- TTV23S2
- TTV23S1
Alternative learning methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä. (not translated)

Seats

20 - 35

Assessment methods

Opintojakso arvioidaan kurssin lopulla pidettävällä kokeella. Viikoittaisista kotitehtävistä saa lisäpisteitä kokeeseen. (not translated)

Degree Programme

Bachelor's Degree Programme in Information and Communications Technology

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3075), 08.01.2024 – 30.04.2024,
3 cr (TIC23S1) — Face-to-face + -
Language of instruction

English

Timing

08.01.2024 - 30.04.2024

Lecturer(s)

Pekka Varis

Planned learning activities, teaching methods and guidance

-lectures
-distance learning
-small group learning
-exercises

Learning materials and recommended literature

Material made by the teacher

Campus

Lutakko Campus

Exam dates and re-exam possibilities

The dates and methods of the exam will be announced in the course opening information.

Learning assignments and student workload

One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 80 hours. The load is distributed in different ways depending on the course implementation.

Enrollment

20.11.2023 - 04.01.2024
Groups
- TIC23S1
Alternative learning methods

The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.

Seats

20 - 35

Assessment methods

Assessment criteria: exam and exercises.

Degree Programme

Bachelor's Degree Programme in Information and Communications Technology

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3076), 21.08.2023 – 19.12.2023,
3 cr (ZJATLS23SMM, ...) — Face-to-face, Online learning + -
Language of instruction

Finnish

Timing

21.08.2023 - 19.12.2023

Lecturer(s)

Pertti Ahonen

Planned learning activities, teaching methods and guidance

- lessons
- self-study
- exercises

Learning materials and recommended literature

Suvanto, K. Tekniikan FYSIIKKA 1. Edita. All editions.

Campus

Main Campus

Exam dates and re-exam possibilities

Exam and two possible resits. Dates and places will be announced in the beginning of the course.

Learning assignments and student workload

One credit equals 27 hours of work, which means that this course needs about 81 working hours.

Enrollment

01.08.2023 - 24.08.2023
Groups
- ZJATLS23SMM
- TLS23SMM
Seats

0 - 40

Assessment methods

Assessment criteria: points from the exercises and the exam.

Open AMK: 5

Degree Programme

Bachelor's Degree Programme in Logistics

Mode of delivery

Face-to-face, Online learning

Share of R&D studies

0.00 cr

Share of virtual studies

2.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3077), 21.08.2023 – 19.12.2023,
3 cr (ZJATLS23S1, ...) — Face-to-face + -
Language of instruction

Finnish

Timing

21.08.2023 - 19.12.2023

Lecturer(s)

Pertti Ahonen

Planned learning activities, teaching methods and guidance

- lessons
- self-study
- exercises

Learning materials and recommended literature

Suvanto, K. Tekniikan FYSIIKKA 1. Edita. All editions.

Campus

Main Campus

Exam dates and re-exam possibilities

Exam and two possible resits. Dates and places will be announced in the beginning of the course.

Learning assignments and student workload

One credit equals 27 hours of work, which means that this course needs about 81 working hours.

Enrollment

01.08.2023 - 24.08.2023
Groups
- ZJATLS23S1
- TLS23S1
Seats

0 - 60

Assessment methods

Assessment criteria: points from the exercises and the exam.

Open AMK: 5

Degree Programme

Bachelor's Degree Programme in Logistics

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3078), 08.01.2024 – 20.05.2024,
3 cr (TLS24KMM) — Face-to-face, Online learning + -
Language of instruction

Finnish

Timing

08.01.2024 - 20.05.2024

Lecturer(s)

Pertti Ahonen

Planned learning activities, teaching methods and guidance

- lessons
- self-study
- exercises

Learning materials and recommended literature

Suvanto, K. Tekniikan FYSIIKKA 1. Edita. All editions.

Campus

Main Campus

Exam dates and re-exam possibilities

Exam and two possible resits. Dates and places will be announced in the beginning of the course.

Learning assignments and student workload

One credit equals 27 hours of work, which means that this course needs about 81 working hours.

Enrollment

20.11.2023 - 15.01.2024
Groups
- TLS24KMM
Seats

0 - 40

Assessment methods

Assessment criteria: points from the exercises and the exam.

Open AMK: 5

Degree Programme

Bachelor's Degree Programme in Logistics

Mode of delivery

Face-to-face, Online learning

Share of R&D studies

0.00 cr

Share of virtual studies

2.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3080), 08.01.2024 – 30.04.2024,
3 cr (TTV23S3, ...) — Face-to-face + -
Language of instruction

Finnish

Timing

08.01.2024 - 30.04.2024

Lecturer(s)

Pekka Varis

Planned learning activities, teaching methods and guidance

Kontaktiopetus 2 h/viikko, joissa luentoa ja laskuharjoituksia.
Viikoittaiset kotitehtävät.
Itsenäistä opiskelua varten on olemassa luentovideot. (not translated)

Learning materials and recommended literature

Opettajan oppimisympäristössä jakama kirjallinen materiaali ja videomateriaali. (not translated)

Campus

Lutakko Campus

Exam dates and re-exam possibilities

Julkaistaan opintojakson alussa oppimisympäristössä. (not translated)

Learning assignments and student workload

Luennot + laskuharjoitukset n. 25 h
Itsenäinen opiskelu ja kotitehtävät 50 h
Tentti 3 h
Kuormitus on tasainen koko opintojakson ajan, yhteensä 80 h. (not translated)

Enrollment

20.11.2023 - 04.01.2024
Groups
- TTV23S3
- TTV23S5
Alternative learning methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä. (not translated)

Seats

20 - 35

Assessment methods

Opintojakso arvioidaan kurssin lopulla pidettävällä kokeella. Viikoittaisista kotitehtävistä saa lisäpisteitä kokeeseen. (not translated)

Degree Programme

Bachelor's Degree Programme in Information and Communications Technology

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3082), 08.01.2024 – 30.04.2024,
3 cr (TTV23SM, ...) — Face-to-face + -
Language of instruction

Finnish

Timing

08.01.2024 - 30.04.2024

Lecturer(s)

Pekka Varis

Planned learning activities, teaching methods and guidance

Videoluennot, verkko-ohjaus.
Viikoittaiset kotitehtävät. (not translated)

Learning materials and recommended literature

Opettajan oppimisympäristössä jakama kirjallinen materiaali ja videomateriaali. (not translated)

Campus

Lutakko Campus

Exam dates and re-exam possibilities

Julkaistaan opintojakson alussa oppimisympäristössä. (not translated)

Learning assignments and student workload

Videoluennot. 25 h
Itsenäinen opiskelu ja kotitehtävät 50 h
Tentti 3 h
Kuormitus on tasainen koko opintojakson ajan, yhteensä 80 h. (not translated)

Enrollment

20.11.2023 - 04.01.2024
Groups
- TTV23SM
- ZJATTV23SM
Alternative learning methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä. (not translated)

Seats

20 - 35

Assessment methods

Opintojakso arvioidaan kurssin lopulla pidettävällä kokeella. Viikoittaisista kotitehtävistä saa lisäpisteitä kokeeseen. (not translated)

Degree Programme

Bachelor's Degree Programme in Information and Communications Technology

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3084), 21.08.2023 – 19.12.2023,
3 cr (TLP23VS, ...) — Face-to-face + -
Language of instruction

English

Timing

21.08.2023 - 19.12.2023

Lecturer(s)

Pertti Ahonen

Planned learning activities, teaching methods and guidance

- lessons
- self-study
- exercises

Learning materials and recommended literature

Knight, Randal D. Physics for Scientists and Engineers. Pearson International edition.

Campus

Main Campus

Exam dates and re-exam possibilities

Exam and two possible resits. Dates and places will be announced in the beginning of the course.

Learning assignments and student workload

One credit equals 27 hours of work, which means that this course needs about 81 working hours

Enrollment

01.08.2023 - 24.08.2023
Groups
- TLP23VS
- ZJATLP23S1
- TLP23S1
Seats

0 - 30

Assessment methods

Assessment criteria: points from the exercises and the exam.

Degree Programme

Bachelor's Degree Programme in Purchasing and Logistics Engineering

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3085), 08.01.2024 – 30.04.2024,
3 cr (TRY23S1, ...) — Face-to-face + -
Language of instruction

Finnish

Timing

08.01.2024 - 30.04.2024

Lecturer(s)

Jaakko Leppä-aho

Campus

Main Campus

Enrollment

20.11.2023 - 04.01.2024
Groups
- TRY23S1
- ZJATRY23S1
Seats

0 - 55

Degree Programme

Bachelor's Degree Programme in Construction and Civil Engineering

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3087), 08.01.2024 – 19.04.2024,
3 cr (TKN23SB, ...) — Face-to-face + -
Language of instruction

Finnish

Timing

08.01.2024 - 19.04.2024

Lecturer(s)

Kalle Niemi

Planned learning activities, teaching methods and guidance

Kurssi koostuu perinteisestä luento-opetuksesta, opetusvideoiden katselusta sekä laskuharjoitusten laskemisesta. Luennoista tulee tallenteet. (not translated)

Learning materials and recommended literature

Kurssin opetusmateriaali löytyy kurssin Moodle-työtilasta pdf-tiedostoina videoina. Oppitunnit tallennetaan.

Seuraavat kirjat sisältävät kurssilla käsiteltäviä aiheita:

1.) Young, Hugh D.; Freedman, Roger A. University Physics with Modern Physics. International edition.
2.) Knight, Randal D. Physics for Scientists and Engineers. Pearson International edition.
3.) Suvanto, K. Tekniikan Fysiikka 1. Edita.

Mitkä tahansa painokset kelpaavat. (not translated)

Campus

Main Campus

Exam dates and re-exam possibilities

Kurssin koeaikataulut ilmoitetaan ensimmäisellä luennolla. (not translated)

Learning assignments and student workload

noin 40 h kontaktiopetusta
5 h loppukoe
noin 30 h itsenäistä opiskelua (not translated)

Enrollment

20.11.2023 - 04.01.2024
Groups
- TKN23SB
- ZJATKN23S1
- ZJATKN23SM
- TKN23SM
- TKN23SA
Seats

0 - 94

Assessment methods

Kurssi arvioidaan kaksiosaisen loppukokeen perusteella. (not translated)

Degree Programme

Bachelor's Degree Programme in Mechanical Engineering

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3088), 28.08.2023 – 19.12.2023,
3 cr (UTIVERKKO, ...) — Online learning + -
Language of instruction

Finnish

Timing

28.08.2023 - 19.12.2023

Lecturer(s)

Pertti Ahonen

Planned learning activities, teaching methods and guidance

- self-study
- distance learning
- exercises

Learning materials and recommended literature

Suvanto, K. Tekniikan FYSIIKKA 1. Edita. All editions.

Campus

Main Campus

Exam dates and re-exam possibilities

Online exam (Zoom) and two possible resits. Dates will be announced in the beginning of the course.

Learning assignments and student workload

One credit equals 27 hours of work, which means that this course needs about 81 working hours.

Enrollment

01.08.2023 - 24.08.2023
Groups
- UTIVERKKO
- ZJA23ST
Seats

0 - 20

Assessment methods

Assessment criteria: points from the exam.

Open AMK: 5

Degree Programme

Bachelor's Degree Programme in Logistics, Bachelor's Degree Programme in Construction and Civil Engineering, Bachelor's Degree Programme in Mechanical Engineering, Bachelor's Degree Programme in Construction Management

Mode of delivery

Online learning

Share of R&D studies

0.00 cr

Share of virtual studies

3.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3089), 08.01.2024 – 19.05.2024,
3 cr (UTIVERKKO) — Online learning + -
Language of instruction

Finnish

Timing

08.01.2024 - 19.05.2024

Lecturer(s)

Pertti Ahonen

Planned learning activities, teaching methods and guidance

- self-study
- distance learning
- exercises

Learning materials and recommended literature

Suvanto, K. Tekniikan FYSIIKKA 1. Edita. All editions.

Campus

Main Campus

Exam dates and re-exam possibilities

Online exam (Zoom) and two possible resits. Dates will be announced in the beginning of the course.

Learning assignments and student workload

One credit equals 27 hours of work, which means that this course needs about 81 working hours.

Enrollment

20.11.2023 - 04.01.2024
Groups
- UTIVERKKO
Seats

0 - 20

Assessment methods

Assessment criteria: points from the exam.

Open AMK: 5

Degree Programme

Bachelor's Degree Programme in Logistics, Bachelor's Degree Programme in Construction and Civil Engineering, Bachelor's Degree Programme in Mechanical Engineering, Bachelor's Degree Programme in Construction Management

Mode of delivery

Online learning

Share of R&D studies

0.00 cr

Share of virtual studies

3.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3090), 01.05.2024 – 31.08.2024,
3 cr (UTIVERKKO) — Online learning + -
Language of instruction

Finnish

Timing

01.05.2024 - 31.08.2024

Lecturer(s)

Pertti Ahonen

Planned learning activities, teaching methods and guidance

- self-study
- distance learning
- exercises

Learning materials and recommended literature

Suvanto, K. Tekniikan FYSIIKKA 1. Edita. All editions.

Campus

Main Campus

Exam dates and re-exam possibilities

Online exam (Zoom) and two possible resits. Dates will be announced in the beginning of the course.

Learning assignments and student workload

One credit equals 27 hours of work, which means that this course needs about 81 working hours.

Enrollment

01.04.2024 - 30.04.2024
Groups
- UTIVERKKO
Seats

0 - 20

Assessment methods

Assessment criteria: points from the exam.

Open AMK: 5

Degree Programme

Bachelor's Degree Programme in Logistics, Bachelor's Degree Programme in Construction and Civil Engineering, Bachelor's Degree Programme in Mechanical Engineering, Bachelor's Degree Programme in Construction Management

Mode of delivery

Online learning

Share of R&D studies

0.00 cr

Share of virtual studies

3.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3092), 28.08.2023 – 19.12.2023,
3 cr (TSA23SR1, ...) — Face-to-face + -
Language of instruction

Finnish

Timing

28.08.2023 - 19.12.2023

Lecturer(s)

Pertti Ahonen

Planned learning activities, teaching methods and guidance

- lessons
- self-study
- exercises

Learning materials and recommended literature

Suvanto, K. Tekniikan FYSIIKKA 1. Edita. All editions.

Campus

Main Campus

Exam dates and re-exam possibilities

Exam and two possible resits. Dates and places will be announced in the beginning of the course.

Learning assignments and student workload

One credit equals 27 hours of work, so this course will take about 81 working hours.

Enrollment

01.08.2023 - 24.08.2023
Groups
- TSA23SR1
- TSA23SR2
Seats

0 - 60

Assessment methods

Assessment criteria: points from the exercises and the exam

Degree Programme

Bachelor's Degree Programme in Electrical and Automation Engineering

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3093), 21.08.2023 – 19.12.2023,
3 cr (TAR23S1) — Face-to-face + -
Language of instruction

English
Finnish

Timing

21.08.2023 - 19.12.2023

Lecturer(s)

Pertti Ahonen

Planned learning activities, teaching methods and guidance

- lessons
- self-study
- exercises

Learning materials and recommended literature

Knight, Randal D. Physics for Scientists and Engineers. Pearson International edition.

Campus

Main Campus

Exam dates and re-exam possibilities

Exam and two possible resits. Dates and places will be announced in the beginning of the course.

Learning assignments and student workload

One credit equals 27 hours of work, so this course will take about 81 working hours.

Enrollment

01.08.2023 - 24.08.2023
Groups
- TAR23S1
Seats

0 - 30

Assessment methods

Assessment criteria: points from the exercises and the exam

Degree Programme

Bachelor's Degree Programme in Logistics, Bachelor's Degree Programme in Construction and Civil Engineering, Bachelor's Degree Programme in Electrical and Automation Engineering, Bachelor's Degree Programme in Energy and Environmental Technology, Bachelor's Degree Programme in Mechanical Engineering, Bachelor's Degree Programme in Information and Communications Technology, Bachelor's Degree Programme in Construction Management, Bachelor's Degree Programme in Purchasing and Logistics Engineering, Bachelor's Degree Programme in Information and Communications Technology

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3094), 15.08.2023 – 19.12.2023,
3 cr (ZJATER23S1, ...) — Face-to-face + -
Language of instruction

Finnish

Timing

15.08.2023 - 19.12.2023

Lecturer(s)

Ville Kotimäki

Planned learning activities, teaching methods and guidance

Kurssi koostuu perinteisestä luento-opetuksesta, opetusvideoiden katselusta sekä laskuharjoitusten laskemisesta. Luennoista tulee tallenteet. (not translated)

Learning materials and recommended literature

Kurssilla käytetään opettajan tekemiä videoita sekä pdf-muotoista materiaaleja.

Seuraavat kirjat sisältävät kurssilla käsiteltäviä aiheita:

1.) Young, Hugh D.; Freedman, Roger A. University Physics with Modern Physics. International edition.
2.) Knight, Randal D. Physics for Scientists and Engineers. Pearson International edition.
3.) Suvanto, K. Tekniikan Fysiikka 1. Edita.

Mitkä tahansa painokset kelpaavat. (not translated)

Campus

Main Campus

Exam dates and re-exam possibilities

Kurssin koeaikataulut ilmoitetaan ensimmäisellä luennolla. (not translated)

Learning assignments and student workload

46 h kontaktiopetusta
5 h loppukoe
30 h itsenäistä opiskelua (not translated)

Enrollment

01.08.2023 - 24.08.2023
Groups
- ZJATER23S1
- TER23S1
- TER23SM
- ZJATER23SM
Small groups
- TER23S1 (: 45. : 0.)
- TER23SM (: 45. : 0.)
Seats

0 - 70

Assessment methods

Kurssi arvioidaan kaksiosaisen loppukokeen perusteella. (not translated)

Degree Programme

Bachelor's Degree Programme in Logistics, Bachelor's Degree Programme in Construction and Civil Engineering, Bachelor's Degree Programme in Electrical and Automation Engineering, Bachelor's Degree Programme in Energy and Environmental Technology, Bachelor's Degree Programme in Mechanical Engineering, Bachelor's Degree Programme in Information and Communications Technology, Bachelor's Degree Programme in Construction Management, Bachelor's Degree Programme in Purchasing and Logistics Engineering, Bachelor's Degree Programme in Information and Communications Technology

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3095), 01.01.2024 – 19.05.2024,
3 cr (TSA24KM) — Face-to-face + -
Language of instruction

Finnish

Timing

01.01.2024 - 19.05.2024

Lecturer(s)

Ville Kotimäki

Planned learning activities, teaching methods and guidance

Kurssi toteutetaan käänteisen luokkahuoneen menetelmällä. Opiskelijat tutustuvat itsenäisesti video- ja pdf-materiaaleihin jonka pohjalta laskevat annettuja harjoitustehtäviä. Harjoitustehtäviin saa apua kontaktiopetuksessa ja nettiohjauksissa, jossa voi esittää opettajalla kysymyksiä. (not translated)

Learning materials and recommended literature

Kurssilla käytetään opettajan tekemiä videoita sekä pdf-muotoista materiaaleja.

Seuraavat kirjat sisältävät kurssilla käsiteltäviä aiheita:

1.) Young, Hugh D.; Freedman, Roger A. University Physics with Modern Physics. International edition.
2.) Knight, Randal D. Physics for Scientists and Engineers. Pearson International edition.
3.) Suvanto, K. Tekniikan Fysiikka 1. Edita.

Mitkä tahansa painokset kelpaavat. (not translated)

Campus

Lutakko Campus

Exam dates and re-exam possibilities

Kurssin koeaikataulut ilmoitetaan ensimmäisellä luennolla. (not translated)

Learning assignments and student workload

Kurssi (3 op) sisältää laskennallisesti noin 81 h työtä. Suurin osa tästä on opiskelijan itsenäistä työskentelyä. Arvio tuntien jakautumisesta on seuraava:

Kontaktiopetusta Jamkilla: 9 h
Loppukoe: 5 h
Etäohjauksia: 6 h
Itsenäistä työskentelyä: 61 h (not translated)

Enrollment

20.11.2023 - 10.01.2024
Groups
- TSA24KM
Assessment methods

Kurssi arvioidaan kaksiosaisen loppukokeen avulla. (not translated)

Degree Programme

Bachelor's Degree Programme in Logistics, Bachelor's Degree Programme in Construction and Civil Engineering, Bachelor's Degree Programme in Electrical and Automation Engineering, Bachelor's Degree Programme in Energy and Environmental Technology, Bachelor's Degree Programme in Mechanical Engineering, Bachelor's Degree Programme in Information and Communications Technology, Bachelor's Degree Programme in Construction Management, Bachelor's Degree Programme in Purchasing and Logistics Engineering, Bachelor's Degree Programme in Information and Communications Technology

Mode of delivery

Face-to-face

Share of R&D studies

0.00 cr

Share of virtual studies

0.00 cr

Unit

School of Technology
Phys1 Force and Motion (TZLF1300-3096), 01.05.2024 – 31.07.2024,
3 cr (UTIVERKKO) — Online learning + -
Language of instruction

English

Timing

01.05.2024 - 31.07.2024

Lecturer(s)

Pertti Ahonen

Planned learning activities, teaching methods and guidance

- self-study
- distance learning
- exercises

Learning materials and recommended literature

Knight, Randal D. Physics for Scientists and Engineers. Pearson International edition.

Campus

Main Campus

Exam dates and re-exam possibilities

Online exam (Zoom) and two possible resits. Dates will be announced in the beginning of the course.

Learning assignments and student workload

One credit equals 27 hours of work, which means that this course needs about 81 working hours.

Enrollment

01.04.2024 - 30.04.2024
Groups
- UTIVERKKO
Seats

0 - 10

Assessment methods

Assessment criteria: points from the exam

Degree Programme

Bachelor's Degree Programme in Purchasing and Logistics Engineering

Mode of delivery

Online learning

Share of R&D studies

0.00 cr

Share of virtual studies

3.00 cr

Unit

School of Technology
Show all (18) Hide

Purpose:
You will learn the basic concepts of kinematics and dynamics. You will also learn logical thinking and problem solving strategies.

EUR-ACE Competences:
Knowledge and understanding

Learning outcomes:
After completing this course you are able to identify the basic principles of kinematics and dynamics.

SI-units, scalars, vectors, uniformly accelerated one dimensional motion, projectile motion, Newton's laws, mechanical forces, uniform circular motion, rotational motion, torque and moment of inertia.

Basic knowledge of elementary functions and ability to solve simple equations is required.

0-5

Sufficient 1
You are able to recognize phenomena and the models attached to the field of the course.
You can solve simple course related problems. You can read different kinds of tables and graphs to get the right information. Your calculations may have some mistakes.

Satisfactory 2
You are able to understand phenomena and the models attached to the field of the course.
You can solve basic problems with the help of examples. You can read different kinds of tables and graphs to get the right information. Your calculations may have some mistakes.

Good 3
You are able to understand phenomena and the models attached to the field of the course.
You can solve basic problems. You can read different kinds of tables and graphs and you are also able to produce them yourself. Your calculations may have some mistakes.

Very good 4
You are able to understand phenomena and the models attached to the field of the course.
You can solve challenging problems. You can read different kinds of tables and graphs and you are able to produce them yourself. You are also able to evaluate the assumptions and applicabilities of the models you are using. Your calculations are mainly right.

Excellent 5
You are able to understand phenomena and the models attached to the field of the course.
You can solve challenging problems. You can read different kinds of tables and graphs and you are able to make make them yourself. You are also able to evaluate the assumptions and applicabilities of the models you are using. You can apply your knowledge to new situations. Your calculations are right but may have some careless errors.

Phys1 Force and Motion, 3 cr - TZLF1300

Upcoming implementations