Mittaus- ja automaatiotekniikan perusteet (5 cr)
Code: TERP0141-3003
General information
Enrollment
01.11.2021 - 09.01.2022
Timing
01.01.2022 - 16.05.2022
Number of ECTS credits allocated
5 op
Virtual portion
3 op
Mode of delivery
40 % Face-to-face, 60 % Online learning
Unit
Teknologiayksikkö
Teaching languages
- Finnish
Seats
0 - 120
Degree programmes
- Energia- ja ympäristötekniikka (AMK)
- Konetekniikka (AMK)
Teachers
- Markku Ström
Teacher in charge
Markku Ström
Scheduling groups
- 1. TER21S1 ryhmä 1 (Paikkoja: 18. Open UAS: 0.)
- 2. TER21S1 ryhmä 2 (Paikkoja: 18. Open UAS: 0.)
- 3. TKN21S1 ryhmä 1 (Paikkoja: 18. Open UAS: 0.)
- 4. TKN21S1 ryhmä 2 (Paikkoja: 18. Open UAS: 0.)
- 5. TKN21S1 ja TER21S1 (Paikkoja: 18. Open UAS: 0.)
- 6. TKN21SM ryhmä 1 (Paikkoja: 18. Open UAS: 0.)
- 7. TKN21SM ryhmä 2 (Paikkoja: 18. Open UAS: 0.)
- 8. TER21SM ryhmä 1 (Paikkoja: 18. Open UAS: 0.)
- 9. TER21SM ryhmä 2 (Paikkoja: 18. Open UAS: 0.)
Groups
-
ZJA21STPPENAvoin amk, tekniikka Enegia- ja ympäristötekniikka, päivä
-
ZJA21STPMKOAvoin amk, tekniikkan Konetekniikka, monimuoto
-
ZJA21STPPKOAvoin amk, tekniikka, Konetekniikka, päivä
-
ZJA21STPMENAvoin amk, tekniikka, Energia- ja ympäristöteniikka, monimuoto
-
TKN21S1Konetekniikka
-
TKN21SMKonetekniikka
-
TER21S1Energia- ja ympäristötekniikka (AMK)
-
TER21SMEnergia- ja ympäristötekniikka (AMK)
Small groups
- 1. TER21S1 ryhmä 1
- 2. TER21S1 ryhmä 2
- 3. TKN21S1 ryhmä 1
- 4. TKN21S1 ryhmä 2
- 5. TKN21S1 ja TER21S1
- 6. TKN21SM ryhmä 1
- 7. TKN21SM ryhmä 2
- 8. TER21SM ryhmä 1
- 9. TER21SM ryhmä 2
Objective
You will get to know the devices used in automation and their operation. Studying in this course requires basic knowledge in the field of technology. The course enables more in-depth study of the topic in other courses.
EA-KW Knowledge and understanding
You are familiar with basic automation hardware solutions and programming environments in different application areas.
EA-EC Application of technology in practice
You can apply the basics of measurement and automation technology to energy technology processes.
Content
Pneumatics
Relay control
Programmable logics and their programming
Fundamentals of digital technology, analog signals and standard messages, basic measurements such as flow, pressure, temperature and surface height measurements.
Measurement errors, logic programming.
Oppimateriaali ja suositeltava kirjallisuus
Opintomoniste (Pdf), opetusvideoita, Asko K. Kippo, Aimo Tikka: Automaatiotekniikan perusteet
Teaching methods
-lectures
-distance learning
-small group learning
-exercises
-learning tasks
Employer connections
-Excursions
-Virtual excursions
Exam schedules
The possible date and method of the exam will be announced in the course opening information.
Vaihtoehtoiset suoritustavat
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Further information
Avoin AMK 1 paikka
Evaluation scale
0-5
Arviointikriteerit, tyydyttävä (1-2)
Adequate (1): You recognize the basics and terminology, but you have shortcomings in understanding the key issues.
Satisfactory (2): You know the basics and terminology, but you have shortcomings in the application of key issues.
Arviointikriteerit, hyvä (3-4)
Good (3): You recognize the components of automation, you know different structures and applications.
Commendable (4): You master the key things and know how to apply them in a variety of ways in different implementations.
Assessment criteria, excellent (5)
Excellent (5): You master key things and know how to apply them creatively.
Qualifications
Basic knowledge in the field of technology