Process EngineeringLaajuus (5 cr)
Code: TERP0120
Credits
5 op
Teaching language
- Finnish
Responsible person
- Minna Nyman
- Antti Henell
Objective
The course focuses on key process equipment and their selection and application. After completing the course, you will understand the role and differences of different process devices and their utilization in equipment choices. You are able to take process safety into account and understand its significance in design. You will be able to draw a PI diagram to match the practical process. You identify the dimensioning criteria for processes and take into account the requirements of sustainable development in dimensioning.
Content
Process equipment (valves, pumps, heat exchangers, conveyors) and the criteria for their selection Steam and condensate systems
Compressed air systems
Process safety Describing unit processes as a PI diagram
Criteria for dimensioning processes.
Qualifications
Tecnical drawing and CAD
Basics of matematics and fysics
Assessment criteria, satisfactory (1)
Sufficient (1): You recognize the basics and terminology, but you have significant shortcomings in interpreting the key issues. You are able to copy a diagram and understand that it consists of subprocesses.
Satisfactory (2): You know the basics and terminology, but you have shortcomings in the application of the essentials. You understand that the overall process consists of sub-processes and the importance of automation in process adjustments.
Assessment criteria, good (3)
Good (3): You know the key points of the course and apply them independently when drawing up process diagrams. You know the standards when creating PI- diagrams and the necessary lists. You understand the starting points of dimensioning and the operation of control circuits.
Excellent (4): You master the unit processes of process engineering and their connections to each other. The diagrams you make in the course are clear and easy to read.
Assessment criteria, excellent (5)
Excellent (5):
You master the key issues of process engineering and are able to apply them and justify your choices. The diagrams you make in the course are clear and easy to read, as well as almost flawless. You have a good understanding of material flows, unit processes and hardware solutions and the dependencies between them.
Enrollment
01.08.2024 - 22.08.2024
Timing
26.08.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
20 - 30
Degree programmes
- Bachelor's Degree Programme in Energy and Environmental Technology
Teachers
- Minna Nyman
- Otto Lallo
Groups
-
TER23S1Energia- ja ympäristötekniikka (AMK)
Objectives
The course focuses on key process equipment and their selection and application. After completing the course, you will understand the role and differences of different process devices and their utilization in equipment choices. You are able to take process safety into account and understand its significance in design. You will be able to draw a PI diagram to match the practical process. You identify the dimensioning criteria for processes and take into account the requirements of sustainable development in dimensioning.
Content
Process equipment (valves, pumps, heat exchangers, conveyors) and the criteria for their selection Steam and condensate systems
Compressed air systems
Process safety Describing unit processes as a PI diagram
Criteria for dimensioning processes.
Time and location
Autumn semester
Contact lessons at the main campus.
The opportunity to participate in webinars. Participating in webinars requires a working camera, headphones and microphone.
Learning materials and recommended literature
Lecture material, PSK standards and videos
The learning material has been published on the Moodle learning platform, where you can find video materials in Finnish.
Koneenpiirustus 1 & 2, Pere A, Kirpe Oy Helsinki, 13 painos 2021. ISBN 978-952-67419-3-2 or newer one
Voimalaitosteknikka, Huttunen M, Opetushallitus Tampere, 2 painos 2013. ISBN 978-952-13-5426-7 or newer one
Teaching methods
Lectures, information search and applied learning tasks
PI&D task using Plant PI&D
Assignments are individual or group assignments
The responsible and transparent use of AI applications is encouraged in this course. Instructions for using artificial intelligence can be found in chapter 3.2 (https://help.jamk.fi/raportointiohje/fi/3-kirjoittamisprosessi/tekoalyn-kaytto-oppimistehtavissa-ja-opinnaytetyossa/) of the thesis reporting instructions. If necessary, the instructions for each learning assignment contain more detailed information on how to use it in more detail in this course.
Exam dates and retake possibilities
With a day program in October/November and a distance learning in December.
Two resit exam in the spring semester
Alternative completion methods
Agreed with the course teacher on a case-by-case.
Student workload
Day program
Lectures theory 27 h.
Lectures Plat PI&D 30 h.
Independentent study 78 h.
Total 135 h.
Further information for students
Grade marks
- 40% test
- 60% exercises
According to the 3-week rule, those enrolled in the course will be removed from the implementation if they have not completed the task informed at the start.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have significant shortcomings in interpreting the key issues. You are able to copy a diagram and understand that it consists of subprocesses.
Satisfactory (2): You know the basics and terminology, but you have shortcomings in the application of the essentials. You understand that the overall process consists of sub-processes and the importance of automation in process adjustments.
Evaluation criteria, good (3-4)
Good (3): You know the key points of the course and apply them independently when drawing up process diagrams. You know the standards when creating PI- diagrams and the necessary lists. You understand the starting points of dimensioning and the operation of control circuits.
Excellent (4): You master the unit processes of process engineering and their connections to each other. The diagrams you make in the course are clear and easy to read.
Evaluation criteria, excellent (5)
Excellent (5):
You master the key issues of process engineering and are able to apply them and justify your choices. The diagrams you make in the course are clear and easy to read, as well as almost flawless. You have a good understanding of material flows, unit processes and hardware solutions and the dependencies between them.
Prerequisites
Tecnical drawing and CAD
Basics of matematics and fysics
Enrollment
01.08.2024 - 22.08.2024
Timing
26.08.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Virtual portion
3 op
Mode of delivery
40 % Face-to-face, 60 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
20 - 30
Degree programmes
- Bachelor's Degree Programme in Energy and Environmental Technology
Teachers
- Minna Nyman
- Juha Musikka
- Otto Lallo
Groups
-
TER23SMEnergia- ja ympäristötekniikka (AMK)
Objectives
The course focuses on key process equipment and their selection and application. After completing the course, you will understand the role and differences of different process devices and their utilization in equipment choices. You are able to take process safety into account and understand its significance in design. You will be able to draw a PI diagram to match the practical process. You identify the dimensioning criteria for processes and take into account the requirements of sustainable development in dimensioning.
Content
Process equipment (valves, pumps, heat exchangers, conveyors) and the criteria for their selection Steam and condensate systems
Compressed air systems
Process safety Describing unit processes as a PI diagram
Criteria for dimensioning processes.
Time and location
Autumn semester
Contact lessons at the main campus.
The opportunity to participate in webinars. Participating in webinars requires a working camera, headphones and microphone.
Learning materials and recommended literature
Lecture material, PSK standards and videos
The learning material has been published on the Moodle learning platform, where you can find video materials in Finnish.
Koneenpiirustus 1 & 2, Pere A, Kirpe Oy Helsinki, 13 painos 2021. ISBN 978-952-67419-3-2 or newer one
Voimalaitosteknikka, Huttunen M, Opetushallitus Tampere, 2 painos 2013. ISBN 978-952-13-5426-7 or newer one
Teaching methods
Lectures, information search and applied learning tasks
PI&D task using Plant PI&D
Assignments are individual or group assignments
The responsible and transparent use of AI applications is encouraged in this course. Instructions for using artificial intelligence can be found in chapter 3.2 (https://help.jamk.fi/raportointiohje/fi/3-kirjoittamisprosessi/tekoalyn-kaytto-oppimistehtavissa-ja-opinnaytetyossa/) of the thesis reporting instructions. If necessary, the instructions for each learning assignment contain more detailed information on how to use it in more detail in this course.
Exam dates and retake possibilities
With a day program in October/November and a distance learning in December.
Two resit exam in the spring semester
Alternative completion methods
Agreed with the course teacher on a case-by-case.
Student workload
Day program
Lectures theory 27 h.
Lectures Plat PI&D 30 h.
Independentent study 78 h.
Total 135 h.
Further information for students
Grade marks
- 40% test
- 60% exercises
According to the 3-week rule, those enrolled in the course will be removed from the implementation if they have not completed the task informed at the start.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have significant shortcomings in interpreting the key issues. You are able to copy a diagram and understand that it consists of subprocesses.
Satisfactory (2): You know the basics and terminology, but you have shortcomings in the application of the essentials. You understand that the overall process consists of sub-processes and the importance of automation in process adjustments.
Evaluation criteria, good (3-4)
Good (3): You know the key points of the course and apply them independently when drawing up process diagrams. You know the standards when creating PI- diagrams and the necessary lists. You understand the starting points of dimensioning and the operation of control circuits.
Excellent (4): You master the unit processes of process engineering and their connections to each other. The diagrams you make in the course are clear and easy to read.
Evaluation criteria, excellent (5)
Excellent (5):
You master the key issues of process engineering and are able to apply them and justify your choices. The diagrams you make in the course are clear and easy to read, as well as almost flawless. You have a good understanding of material flows, unit processes and hardware solutions and the dependencies between them.
Prerequisites
Tecnical drawing and CAD
Basics of matematics and fysics
Enrollment
01.08.2023 - 24.08.2023
Timing
15.08.2023 - 19.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor's Degree Programme in Energy and Environmental Technology
Teachers
- Minna Nyman
- Antti Henell
- Toni Hiltunen
Scheduling groups
- TER22S1 (Capacity: 40. Open UAS: 0.)
- TER22SM (Capacity: 40. Open UAS: 0.)
Groups
-
TER22S1Energia- ja ympäristötekniikka (AMK)
-
TER22SMEnergia- ja ympäristötekniikka (AMK)
Small groups
- Scheduling group 1
- Scheduling group 2
Objectives
The course focuses on key process equipment and their selection and application. After completing the course, you will understand the role and differences of different process devices and their utilization in equipment choices. You are able to take process safety into account and understand its significance in design. You will be able to draw a PI diagram to match the practical process. You identify the dimensioning criteria for processes and take into account the requirements of sustainable development in dimensioning.
Content
Process equipment (valves, pumps, heat exchangers, conveyors) and the criteria for their selection Steam and condensate systems
Compressed air systems
Process safety Describing unit processes as a PI diagram
Criteria for dimensioning processes.
Learning materials and recommended literature
Lecture material, PSK standards and videos
The learning material has been published on the Moodle learning platform, where you can find video materials in Finnish.
Koneenpiirustus 1 & 2, Pere A, Kirpe Oy Helsinki, 13 painos 2021. ISBN 978-952-67419-3-2
Voimalaitosteknikka, Huttunen M, Opetushallitus Tampere, 2 painos 2013. ISBN 978-952-13-5426-7
Teaching methods
Lectures, information search and applied learning tasks
PI&D task using Plant PI&D
Assignments are individual or group assignments
Exam dates and retake possibilities
With a day program in October and a distance learning in December.
Two resit exam in the spring semester
Alternative completion methods
Agreed with the course teacher on a case-by-case.
Student workload
Day program
Lectures theory 21 h.
Lectures Plat PI&D 30 h.
Independentent study 84 h.
Total 135 h.
Distance learning
Lectures theory 10 h.
Lectures Plat PI&D 20 h.
Independentent study 105 h.
Total 135 h.
Further information for students
Grade marks
- 60% test
- 40% exercises
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have significant shortcomings in interpreting the key issues. You are able to copy a diagram and understand that it consists of subprocesses.
Satisfactory (2): You know the basics and terminology, but you have shortcomings in the application of the essentials. You understand that the overall process consists of sub-processes and the importance of automation in process adjustments.
Evaluation criteria, good (3-4)
Good (3): You know the key points of the course and apply them independently when drawing up process diagrams. You know the standards when creating PI- diagrams and the necessary lists. You understand the starting points of dimensioning and the operation of control circuits.
Excellent (4): You master the unit processes of process engineering and their connections to each other. The diagrams you make in the course are clear and easy to read.
Evaluation criteria, excellent (5)
Excellent (5):
You master the key issues of process engineering and are able to apply them and justify your choices. The diagrams you make in the course are clear and easy to read, as well as almost flawless. You have a good understanding of material flows, unit processes and hardware solutions and the dependencies between them.
Prerequisites
Tecnical drawing and CAD
Basics of matematics and fysics
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 31.12.2022
Number of ECTS credits allocated
5 op
Virtual portion
2 op
Mode of delivery
60 % Face-to-face, 40 % Online learning
Unit
School of Technology
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Energy and Environmental Technology
Teachers
- Minna Nyman
- Antti Henell
Scheduling groups
- Päiväryhmä TER21S1 (Capacity: 50. Open UAS: 0.)
- Monimuotoryhmä TER21SM (Capacity: 50. Open UAS: 0.)
Groups
-
TER21S1Energia- ja ympäristötekniikka (AMK)
-
TER21SMEnergia- ja ympäristötekniikka (AMK)
Small groups
- Pienryhmä 1
- Pienryhmä 2
Objectives
The course focuses on key process equipment and their selection and application. After completing the course, you will understand the role and differences of different process devices and their utilization in equipment choices. You are able to take process safety into account and understand its significance in design. You will be able to draw a PI diagram to match the practical process. You identify the dimensioning criteria for processes and take into account the requirements of sustainable development in dimensioning.
Content
Process equipment (valves, pumps, heat exchangers, conveyors) and the criteria for their selection Steam and condensate systems
Compressed air systems
Process safety Describing unit processes as a PI diagram
Criteria for dimensioning processes.
Learning materials and recommended literature
Luentomateriaali, PSK-standardit ja videot
Oppimateriaali on julkaistu Moodle-oppimisalustalle, josta löytyvät suomenkieliset videomateriaalit.
Koneenpiirustus 1 & 2, Pere A, Kirpe Oy Helsinki, 13 painos 2021. ISBN 978-952-67419-3-2
Voimalaitosteknikka, Huttunen M, Opetushallitus Tampere, 2 painos 2013. ISBN 978-952-13-5426-7
Teaching methods
Luennot, tiedonhaku ja soveltavat oppimistehtävät
Plant PI&D kaavionpiirtoohjelmalla toteutettavat PI-kaaviot
Tehtävät yksilökohtaisia tai ryhmätehtäviä
Exam dates and retake possibilities
Tentti lokakuussa päiväohjelma ja monimuotoryhmällä joulukuussa. Kaksi uusinta mahdollisuutta kevät lukukaudella
Alternative completion methods
Muulla tavalla hankitun osaamisen opinnollistaminen sovitaan opinjakson opettajan kanssa tapauskohtaisesti
Student workload
Luentoja teoria 21 h päiväryhmällä, monimuotoryhmällä n. 10 h.
Luentoja ACAD 31 h
Itsenäinen opiskelu 83 h
Yhteensä 135 h
Further information for students
Kurssin arvosana koostuu:
- 60 % Tentistä
- 40 % Kaavionpiirto oppimistehtävistä
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have significant shortcomings in interpreting the key issues. You are able to copy a diagram and understand that it consists of subprocesses.
Satisfactory (2): You know the basics and terminology, but you have shortcomings in the application of the essentials. You understand that the overall process consists of sub-processes and the importance of automation in process adjustments.
Evaluation criteria, good (3-4)
Good (3): You know the key points of the course and apply them independently when drawing up process diagrams. You know the standards when creating PI- diagrams and the necessary lists. You understand the starting points of dimensioning and the operation of control circuits.
Excellent (4): You master the unit processes of process engineering and their connections to each other. The diagrams you make in the course are clear and easy to read.
Evaluation criteria, excellent (5)
Excellent (5):
You master the key issues of process engineering and are able to apply them and justify your choices. The diagrams you make in the course are clear and easy to read, as well as almost flawless. You have a good understanding of material flows, unit processes and hardware solutions and the dependencies between them.
Prerequisites
Tecnical drawing and CAD
Basics of matematics and fysics