Siirry suoraan sisältöön

Sähkötekniikan laboratoriotyöt (2 cr)

Code: TSAS0510-3007

General information


Enrollment

01.08.2022 - 25.08.2022

Timing

22.08.2022 - 21.05.2023

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

Teknologiayksikkö

Campus

Pääkampus

Teaching languages

  • Finnish

Degree programmes

  • Sähkö- ja automaatiotekniikka (AMK)

Teachers

  • Ari Latvala

Groups

  • ZJATSA22S1
    Avoin amk, Sähkö- ja automaatiotekniikka, Päivä
  • TSA22SR1
    Sähkö- ja automaatiotekniikka (AMK)
  • TSA22SR2
    Sähkö- ja automaatiotekniikka (AMK)
  • 30.03.2023 09:00 - 10:45, Sähkötekniikan laboratoriotyöt TSAS0510-3007 Ryhmä 2
  • 30.03.2023 13:15 - 15:00, Sähkötekniikan laboratoriotyöt TSAS0510-3007 Ryhmä 1
  • 03.04.2023 13:15 - 15:15, Sähkötekniikan laboratoriotyöt TSAS0510-3007 Ryhmä 3 ja 4 (Rästit)
  • 04.04.2023 09:00 - 11:00, Sähkötekniikan laboratoriotyöt TSAS0510-3007 Ryhmä 3 ja 4 (Rästit)
  • 05.04.2023 10:00 - 12:00, Sähkötekniikan laboratoriotyöt TSAS0510-3007 Ryhmä 1 ja 2 (Rästit)
  • 06.04.2023 13:15 - 15:15, Sähkötekniikan laboratoriotyöt TSAS0510-3007 Ryhmä 1 ja 2 (Rästit)
  • 14.04.2023 09:00 - 11:00, Sähkötekniikan laboratoriotyöt TSAS0510-3007 Kaikkien ryhmien kevään viimeiset rästit!

Objective

You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.

EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.

EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.

Content

components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities

Oppimateriaali ja suositeltava kirjallisuus

Material provided by the teacher

Teaching methods

The learning methods are the electrical circuit connections made in the electrical laboratory and the related measurements made with multi meters, as well as the calculation tasks related to the circuits.

Student workload

A total of 54 hours of learning work.

Further information

Avoin AMK monimuotototeutus 5 paikkaa

Evaluation scale

Pass/Fail

Assessment criteria, approved/failed

Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.

Qualifications

Knowledge of electrical engineering theory