Skip to main content

Technical Drawing and CADLaajuus (6 cr)

Code: TKKP0310

Credits

6 op

Teaching language

  • Finnish

Responsible person

  • Antti Henell
  • Miikka Parviainen

Objective

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Qualifications

No prior knowledge required.

Assessment criteria, satisfactory (1)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Assessment criteria, good (3)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Assessment criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Assessment criteria, approved/failed

You have completed all the assignments and received 50% of the points from the exam.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

6 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

20 - 40

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Sami Koponen
  • Antti Henell
Groups
  • TKN24SM
    Konetekniikka (AMK)
  • ZJATKN24SM
    Avoin amk, Konetekniikka, Monimuoto

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Lecture material
Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2021. ISBN 978-952-67419-3-2
or newer.

Teaching methods

Lectures, Video lectures, problem-based learning assignments and exercises.
Free-form anonymous feedback is collected in the middle of the course.

The responsible and transparent use of AI applications is encouraged in this course. Instructions for using artificial intelligence can be found in chapter 3.2 (https://help.jamk.fi/raportointiohje/fi/3-kirjoittamisprosessi/tekoalyn-kaytto-oppimistehtavissa-ja-opinnaytetyossa/) of the thesis reporting instructions. If necessary, the instructions for each learning assignment contain more detailed information on how to use it in more detail in this course.

Practical training and working life connections

Exam in week no. xx. Two re-exams, the first in May 2023 and the second in September 2025.

Student workload

Lectures 70 h
Learning assignments 35 h
Independent work 57 h
A total of 162 h

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

6 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

20 - 30

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Miikka Parviainen
Groups
  • ZJM24STVGK
    Avoin amk, Tekniikka, Väyläopinnot, Gradia
  • TKN24SA
    Konetekniikka (AMK)
  • ZJATKN24S1
    Avoin amk, Konetekniikka, Päivä

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Lecture material
Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2016. ISBN 978-952-67419-2-5

Teaching methods

Lectures, Video lectures and learning tasks and exercises based on problem-based learning, which introduce the various aspects of technical drawing.
Free-form anonymous feedback is collected in the middle of the course.

The implementation of the course is based on classroom-based contact teaching. About eight main areas of technical drawing are covered in the contact courses. About half of the contact course is theory lectures and half is learning practical drawing/modelling with CAD software. The subjects are familiarized with the written lecture material and the course book. During the study period, students do 6 evaluable learning assignments. In addition, self-directed practice can be done with additional tasks in Moodle. In addition, the part of the study unit related to product information management is done as group work in groups of about four students independently and returned to Moodle.

The responsible and transparent use of AI applications is encouraged in this course. Instructions for using artificial intelligence can be found in chapter 3.2 (https://help.jamk.fi/raportointiohje/fi/3-kirjoittamisprosessi/tekoalyn-kaytto-oppimistehtavissa-ja-opinnaytetyossa/) of the thesis reporting instructions. If necessary, the instructions for each learning assignment contain more detailed information on how to use it in that particular task.

If the student has not been present at the first contact class, and does not return the first learning task with the group within the deadline, he/she will be removed from the course, and after that he/she can no longer participate in this implementation of the course.

There is an 80% attendance requirement for contact classes in the course.

Practical training and working life connections

If possible, a representative of the manufacturing industry will give a visiting lecture during the study period.

Exam dates and retake possibilities

Exam on week number 15. The final exam is so-called near-term exam that is carried out in class.. Two re-exams, the first in May 2025 and the second in September 2025.

Alternative completion methods

The assessment of previous competence is made on the first contact. It is possible to obtain exemptions, where applicable, on the basis of previous study.

Student workload

The calculated load of the course is 162 h. It is divided between contact teaching, group work, independent work and six practice tasks:
Lectures 70 h
Learning assignments 35 h
Group work 15 h
Independent work 37 h
A total of 162 h

Content scheduling

Contact classes are implemented according to a separate implementation-specific course plan, which is published in Moodle.

Further information for students

Continuous developmental feedback is given in the learning tasks.
Assessment consists of exam 57% and learning assignments 43%.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

6 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

20 - 30

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Miikka Parviainen
Groups
  • ZJM24STVGK
    Avoin amk, Tekniikka, Väyläopinnot, Gradia
  • TKN24SB
    Konetekniikka (AMK)
  • ZJATKN24S1
    Avoin amk, Konetekniikka, Päivä

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Lecture material
Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2016. ISBN 978-952-67419-2-5

Teaching methods

Lectures, Video lectures and learning tasks and exercises based on problem-based learning, which introduce the various aspects of technical drawing.
Free-form anonymous feedback is collected in the middle of the course.

The implementation of the course is based on classroom-based contact teaching. About eight main areas of technical drawing are covered in the contact courses. About half of the contact course is theory lectures and half is learning practical drawing/modelling with CAD software. The subjects are familiarized with the written lecture material and the course book. During the study period, students do 6 evaluable learning assignments. In addition, self-directed practice can be done with additional tasks in Moodle. In addition, the part of the study unit related to product information management is done as group work in groups of about four students independently and returned to Moodle.

The responsible and transparent use of AI applications is encouraged in this course. Instructions for using artificial intelligence can be found in chapter 3.2 (https://help.jamk.fi/raportointiohje/fi/3-kirjoittamisprosessi/tekoalyn-kaytto-oppimistehtavissa-ja-opinnaytetyossa/) of the thesis reporting instructions. If necessary, the instructions for each learning assignment contain more detailed information on how to use it in that particular task.

If the student has not been present at the first contact class, and does not return the first learning task with the group within the deadline, he/she will be removed from the course, and after that he/she can no longer participate in this implementation of the course.

There is an 80% attendance requirement for contact classes in the course.

Practical training and working life connections

If possible, a representative of the manufacturing industry will give a visiting lecture during the study period.

Exam dates and retake possibilities

Exam on week number 15. The final exam is so-called near-term exam that is carried out in class.. Two re-exams, the first in May 2025 and the second in September 2025.

Alternative completion methods

The assessment of previous competence is made on the first contact. It is possible to obtain exemptions, where applicable, on the basis of previous study.

Student workload

The calculated load of the course is 162 h. It is divided between contact teaching, independent work and six practice tasks:
Lectures 70 h
Learning assignments 35 h
Group work 15 h
Independent work 57 h
A total of 162 h

Content scheduling

Contact classes are implemented according to a separate implementation-specific course plan, which is published in Moodle.

Further information for students

Continuous developmental feedback is given in the learning tasks.
Assessment consists of exam 57% and learning assignments 43%.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

6 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 30

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Miikka Parviainen
Groups
  • ZJATKN23S1
    Avoin amk, Konetekniikka, Päivä
  • TKN23SA
    Konetekniikka (AMK)

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Lecture material
Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2016. ISBN 978-952-67419-2-5

Teaching methods

Lectures, Video lectures, problem-based learning assignments and exercises.
Free-form anonymous feedback is collected in the middle of the course.

Exam dates and retake possibilities

Exam in week no. 15. Two re-exams, the first in May 2023 and the second in September 2023.

Student workload

Lectures 70 h
Learning assignments 35 h
Independent work 57 h
A total of 162 h

Further information for students

Open university 5 places

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 20.05.2024

Number of ECTS credits allocated

6 op

Virtual portion

3 op

Mode of delivery

50 % Face-to-face, 50 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 77

Degree programmes
  • Bachelor's Degree Programme in Energy and Environmental Technology
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Timo Malvisalo
  • Antti Henell
Groups
  • ZJATKN23SM
    Avoin amk, Konetekniikka, Monimuoto
  • TKN23SM
    Konetekniikka (AMK)
  • TER23SM
    Energia- ja ympäristötekniikka (AMK)
  • ZJATER23SM
    Avoin amk, Energia- ja ympäristötekniikka , monimuoto

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Lecture material
Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2021. ISBN 978-952-67419-3-2
or newer.

Teaching methods

Lectures, Video lectures, problem-based learning assignments and exercises.
Free-form anonymous feedback is collected in the middle of the course.

Exam dates and retake possibilities

Exam in week no. 15. Two re-exams, the first in May 2023 and the second in September 2023.

Student workload

Lectures 70 h
Learning assignments 35 h
Independent work 57 h
A total of 162 h

Further information for students

Open university 5 places

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

6 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 30

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Miikka Parviainen
Groups
  • TKN23SB
    Konetekniikka (AMK)
  • ZJATKN23S1
    Avoin amk, Konetekniikka, Päivä

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Lecture material
Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2016. ISBN 978-952-67419-2-5

Teaching methods

Lectures, Video lectures, problem-based learning assignments and exercises.
Free-form anonymous feedback is collected in the middle of the course.

Exam dates and retake possibilities

Exam in week no. 15. Two re-exams, the first in May 2024 and the second in September 2024.

Student workload

Lectures 70 h
Learning assignments 35 h
Independent work 57 h
A total of 162 h

Further information for students

Open university 5 places

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

01.11.2022 - 05.01.2023

Timing

01.01.2023 - 21.05.2023

Number of ECTS credits allocated

6 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 80

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Miikka Parviainen
Teacher in charge

Miikka Parviainen

Scheduling groups
  • TKN22R1 (Capacity: 30. Open UAS: 0.)
  • TKN22R2 (Capacity: 30. Open UAS: 0.)
Groups
  • TKN22SA
    Konetekniikka (AMK)
  • TKN22SB
    Konetekniikka (AMK)
  • TKN22S1
    Konetekniikka (AMK)
  • ZJAG22STK
    Avoin AMK,Korkeakoulupolku, Konetekniikka, Gradia
  • ZJATKN22S1
    Avoin amk, Konetekniikka, Päivä
Small groups
  • TKN22R1
  • TKN22R2

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Lecture material
Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2016. ISBN 978-952-67419-2-5

Teaching methods

Lectures, Video lectures, problem-based learning assignments and exercises.
Free-form anonymous feedback is collected in the middle of the course.

Exam dates and retake possibilities

Exam in week no. 15. Two re-exams, the first in May 2023 and the second in September 2023.

Student workload

Lectures 70 h
Learning assignments 35 h
Independent work 57 h
A total of 162 h

Further information for students

Open university 5 places

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

01.11.2022 - 05.01.2023

Timing

01.01.2023 - 21.05.2023

Number of ECTS credits allocated

6 op

Virtual portion

4 op

Mode of delivery

34 % Face-to-face, 66 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 80

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Antti Henell
Teacher in charge

Miikka Parviainen

Groups
  • ZJATKN22SM
    Avoin amk, Konetekniikka, Monimuoto
  • TKN22SM
    Konetekniikka (AMK)

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Lecture material
Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2016. ISBN 978-952-67419-2-5

Teaching methods

Lectures, Video lectures, problem-based learning assignments and exercises.
Free-form anonymous feedback is collected in the middle of the course.

Exam dates and retake possibilities

Exam in week no. 15. Two re-exams, the first in May 2022 and the second in September 2022.

Student workload

Lectures 70 h
Learning assignments 35 h
Independent work 57 h
A total of 162 h

Further information for students

Open university 5 places

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

01.11.2022 - 05.01.2023

Timing

01.01.2023 - 21.05.2023

Number of ECTS credits allocated

6 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 80

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Miikka Parviainen
Teacher in charge

Miikka Parviainen

Scheduling groups
  • TKN22R1 (Capacity: 30. Open UAS: 0.)
  • TKN22R2 (Capacity: 30. Open UAS: 0.)
Groups
  • TKN22SB
    Konetekniikka (AMK)
Small groups
  • TKN22R1
  • TKN22R2

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Lecture material
Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2016. ISBN 978-952-67419-2-5

Teaching methods

Lectures, Video lectures, problem-based learning assignments and exercises.
Free-form anonymous feedback is collected in the middle of the course.

Exam dates and retake possibilities

Exam in week no. 15. Two re-exams, the first in May 2023 and the second in September 2023.

Student workload

Lectures 70 h
Learning assignments 35 h
Independent work 57 h
A total of 162 h

Further information for students

Open university 5 places

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

01.11.2021 - 09.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

6 op

Virtual portion

1 op

Mode of delivery

84 % Face-to-face, 16 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 50

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Sami Koponen
  • Sami Koponen
  • Miikka Parviainen
Teacher in charge

Miikka Parviainen

Scheduling groups
  • TKN21R1 (Capacity: 30. Open UAS: 0.)
  • TKN21R2 (Capacity: 15. Open UAS: 0.)
Groups
  • ZJA21STGK
    Avoin amk, Korkeakoulupolkuopinnot, Gradia, Konetekniikka
  • ZJA21STPPKO
    Avoin amk, tekniikka, Konetekniikka, päivä
  • TKN21S1
    Konetekniikka
Small groups
  • TKN21R1
  • TKN21R2

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Lecture material
Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2016. ISBN 978-952-67419-2-5

Teaching methods

Lectures, Video lectures, problem-based learning assignments and exercises.
Free-form anonymous feedback is collected in the middle of the course.

Exam dates and retake possibilities

Exam in week no. 15. Two re-exams, the first in May 2023 and the second in September 2023.

Student workload

Lectures 70 h
Learning assignments 35 h
Independent work 57 h
A total of 162 h

Further information for students

Open university 5 places

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.

Enrollment

01.11.2021 - 09.01.2022

Timing

01.01.2022 - 15.05.2022

Number of ECTS credits allocated

6 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Sami Koponen
  • Antti Henell
Teacher in charge

Antti Henell

Groups
  • ZJA21STPMKO
    Avoin amk, tekniikkan Konetekniikka, monimuoto
  • TKN21SM
    Konetekniikka

Objectives

Skills in technical drawing and CAD design provide the ability to transfer design product information and manufacturing technical knowledge digitally in various fields of technology. Mastering CAD design and knowing the markings on drawings are the foundation for an engineer’s day-to-day performance of work tasks.Digityalization is very important subject.

You will learn to draw different projections of a part by hand and with the help of a computer, as well as different sectional views. You will learn to make standard drawing markings on drawings, such as dimensions, surface markings, welding markings, and various tolerances.

In addition, you will learn to understand the importance of item and product information management. Your skills will develop from an understanding of basic concepts to applied technical drawing tasks.

Knowledge and understanding:
You have an understanding of the importance of technical drawing in preparing unambiguous documents for design, production and sales.

Engineering practice:
You can read ready-made drawings and make unambiguous working drawings of machine parts or other products. You control a CAD system that allows you to produce working and assembly drawings. You will understand the importance of product management and revision in design.

Multidisciplinary competences:
After the course you will be able to attach pictures and technical documents to your assignments and theses. You will have the necessary knowledge and skills to start working in ancillary design tasks.

Content

Basics of technical drawing: drawings and scales, projections, line types, dimensioning, surface marks, welding marks, fittings and geometric tolerances.
CAD software: Drawing parts both manually and with the help of a computer. Computer-aided modeling of individual parts and assemblies.

Learning materials and recommended literature

Luentomateriaali. Tekniikan taulukkokirja, Valtanen E, Genesis-kirjat Mikkeli, 22 painos 2019. ISBN 978-952-9867-42-4 Koneenpiirustus 1 & 2, Pere A, Kirpe Oy, Helsinki, 2016. ISBN 978-952-67419-2-5

Teaching methods

Luennot, videoluennot ja erilaiset harjoitustyöt. Ongelmalähtöisen oppimisen kautta opiskelijoilla on tehtäviä, joita he lähtevät ratkaisemaan. Tehtävien ratkaisuun he voivat käyttää apunaan videoituja esimerkkejä, videoituja teorialuentoja. Tehtäviä voidaan ratkoa yksilöittäin tai ryhmissä, mutta palautukset aina yksilökohtaisesti. Puhtaissa etätoteutuksissa käytetään ohjauksen apuna webinaareja. Opintojaksosta kerätään sen puolivälissä vapaamuotoinen anonyymi palaute.

Exam dates and retake possibilities

Koe ja kaksi uusintaa.

Student workload

Luennot 32h
Harjoitustyö 30h
Itsenäinen työskentely 95h
Yhteensä 157h

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

The overall assessment consists of 60% of the exam and 40% of the learning assignments. To receive a numerical grade, a student must take a supervised exam. The examinations are held three times a year in accordance with the degree rule. If a remote exam is arranged, the student must have a printer and scanner available. Photo submissions are not accepted.

Adequate (1): You are familiar with technical drawing terminology and drawing symbols. You can produce drawings by copying annotations from finished drawings, but you have difficulties interpreting the annotations and lacks in putting them into practice.

Satisfactory (2): You are familiar with technical drawing terminology and drawing symbols. You are able to produce drawings independently, but you have lacks in the practical application of technical drawing standards.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the drawing symbols of technical drawing and know how to apply them in practice. You can take advantages of the features of CAD programs and produce drawings in accordance with standards. In addition, you understand the importance of project scheduling and product management in planning.

Very good (4): You are familiar with the drawing symbols of technical drawing and are able to apply them comprehensively in practice. You can make extensive use of the features of CAD programs and produce drawings in accordance with standards. The drawings may have some minor flaws or slightly misinterpretation possibilities. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, excellent (5)

Excellent (5): You know the drawing symbols of technical drawing and know how to apply them professionally in practice. You can make extensive use of the features of CAD programs and produce standard drawings with correct symbols. You also have a versatile control over the use of the ISO tolerance system and geometric product specification in machine drawing. In addition, you have a good command of the basics of project scheduling and the use of items in planning.

Evaluation criteria, pass/failed

You have completed all the assignments and received 50% of the points from the exam.

Prerequisites

No prior knowledge required.

Further information

Studies are offered in parts of one credit point through the open university of applied sciences also as a review for engineers who have already graduated and through CampusOnline for students from other polytechnics. The course can be offered outside of degree programs without a supervised exam with passed-failed assessment.