Skip to main content

Field devicesLaajuus (2 cr)

Code: TSAAA600

Credits

2 op

Teaching language

  • Finnish

Responsible person

  • Veli-Matti Häkkinen

Objective

Control valves and their selection and dimensioning. The placing of field equipment into a process. The installing principles of field equipment and the accessories used in installation.

EUR-ACE ENGINEERING PRCATICE
You will understand the implications of field device installation locations and practices for system functionality. You will be able to draft and interpret documents related to field equipment installation technology and their selection, and you will understand the role of standards as part of a engineering project.

Content

Sensors
Control valves and their selection and dimensioning.
The placing of field equipment into a process.
The installing principles of field equipment and the documentation

Qualifications

Basic knowledge of physics and measurement technology

Assessment criteria, satisfactory (1)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but doing holistic field device engineering is challenging.

Assessment criteria, good (3)

Good (3): You know the most common field devices and the basics of their placement, installation methods, installation documentation, and installation materials. You can select and dimension field devices suitable for basic processes.

Very good (4): You master the key issues and know how to apply them in a variety of ways in projects.

Assessment criteria, excellent (5)

Excellent (5): You master the key issues and are able to apply them, outlining different alternative functional total solutions.

Enrollment

01.11.2024 - 09.01.2025

Timing

13.01.2025 - 18.05.2025

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Antti Parantainen
Groups
  • TSA24KMA
    Insinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus

Objectives

Control valves and their selection and dimensioning. The placing of field equipment into a process. The installing principles of field equipment and the accessories used in installation.

EUR-ACE ENGINEERING PRCATICE
You will understand the implications of field device installation locations and practices for system functionality. You will be able to draft and interpret documents related to field equipment installation technology and their selection, and you will understand the role of standards as part of a engineering project.

Content

Sensors
Control valves and their selection and dimensioning.
The placing of field equipment into a process.
The installing principles of field equipment and the documentation

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but doing holistic field device engineering is challenging.

Evaluation criteria, good (3-4)

Good (3): You know the most common field devices and the basics of their placement, installation methods, installation documentation, and installation materials. You can select and dimension field devices suitable for basic processes.

Very good (4): You master the key issues and know how to apply them in a variety of ways in projects.

Evaluation criteria, excellent (5)

Excellent (5): You master the key issues and are able to apply them, outlining different alternative functional total solutions.

Prerequisites

Basic knowledge of physics and measurement technology

Enrollment

01.08.2024 - 22.08.2024

Timing

01.08.2024 - 31.12.2024

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Antti Parantainen
Groups
  • TSA23SA
    Insinööri (AMK), sähkö- ja automaatiotekniikka, päivätoteutus

Objectives

Control valves and their selection and dimensioning. The placing of field equipment into a process. The installing principles of field equipment and the accessories used in installation.

EUR-ACE ENGINEERING PRCATICE
You will understand the implications of field device installation locations and practices for system functionality. You will be able to draft and interpret documents related to field equipment installation technology and their selection, and you will understand the role of standards as part of a engineering project.

Content

Sensors
Control valves and their selection and dimensioning.
The placing of field equipment into a process.
The installing principles of field equipment and the documentation

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but doing holistic field device engineering is challenging.

Evaluation criteria, good (3-4)

Good (3): You know the most common field devices and the basics of their placement, installation methods, installation documentation, and installation materials. You can select and dimension field devices suitable for basic processes.

Very good (4): You master the key issues and know how to apply them in a variety of ways in projects.

Evaluation criteria, excellent (5)

Excellent (5): You master the key issues and are able to apply them, outlining different alternative functional total solutions.

Prerequisites

Basic knowledge of physics and measurement technology

Enrollment

01.08.2024 - 22.08.2024

Timing

01.08.2024 - 31.12.2024

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • English
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Antti Parantainen
Groups
  • TAR23S1
    Bachelor's Degree Programme in Automation and Robotics

Objectives

Control valves and their selection and dimensioning. The placing of field equipment into a process. The installing principles of field equipment and the accessories used in installation.

EUR-ACE ENGINEERING PRCATICE
You will understand the implications of field device installation locations and practices for system functionality. You will be able to draft and interpret documents related to field equipment installation technology and their selection, and you will understand the role of standards as part of a engineering project.

Content

Sensors
Control valves and their selection and dimensioning.
The placing of field equipment into a process.
The installing principles of field equipment and the documentation

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but doing holistic field device engineering is challenging.

Evaluation criteria, good (3-4)

Good (3): You know the most common field devices and the basics of their placement, installation methods, installation documentation, and installation materials. You can select and dimension field devices suitable for basic processes.

Very good (4): You master the key issues and know how to apply them in a variety of ways in projects.

Evaluation criteria, excellent (5)

Excellent (5): You master the key issues and are able to apply them, outlining different alternative functional total solutions.

Prerequisites

Basic knowledge of physics and measurement technology

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 01.03.2024

Number of ECTS credits allocated

2 op

Virtual portion

1 op

Mode of delivery

50 % Face-to-face, 50 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Veli-Matti Häkkinen
Groups
  • TSA23KMA
    Insinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus

Objectives

Control valves and their selection and dimensioning. The placing of field equipment into a process. The installing principles of field equipment and the accessories used in installation.

EUR-ACE ENGINEERING PRCATICE
You will understand the implications of field device installation locations and practices for system functionality. You will be able to draft and interpret documents related to field equipment installation technology and their selection, and you will understand the role of standards as part of a engineering project.

Content

Sensors
Control valves and their selection and dimensioning.
The placing of field equipment into a process.
The installing principles of field equipment and the documentation

Learning materials and recommended literature

Sivonen, M. 2001. Teollisuuden instrumentointi: rakenne ja suunnittelu. Helsinki: AEL.

Häkkinen, V-M. 2020. Kenttälaitteet. Kurssimateriaali, AMK. Jyväskylän ammattikorkeakoulu, Tekniikan ala.

Teaching methods

The automation engineering entities is inherently problem-oriented and therefore it is also used as a learning method. Concretely, it is done through contact hours, returnable exercises and independent work.

Exam dates and retake possibilities

Passing exam at the time announced in Moodle and two re-examinations.

Alternative completion methods

Discuss on a case-by-case basis.

Student workload

Lectures 16 h, Tutorial lessons 4 h, independent work 34 h, a total of 54 hours of learning work.

Further information for students

Self-assessment takes place mainly through learning tasks. The assessment decision is based 100% on the competence shown in the exam.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but doing holistic field device engineering is challenging.

Evaluation criteria, good (3-4)

Good (3): You know the most common field devices and the basics of their placement, installation methods, installation documentation, and installation materials. You can select and dimension field devices suitable for basic processes.

Very good (4): You master the key issues and know how to apply them in a variety of ways in projects.

Evaluation criteria, excellent (5)

Excellent (5): You master the key issues and are able to apply them, outlining different alternative functional total solutions.

Prerequisites

Basic knowledge of physics and measurement technology

Enrollment

01.08.2023 - 24.08.2023

Timing

01.08.2023 - 15.10.2023

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Veli-Matti Häkkinen
Groups
  • TSA22SA
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

Control valves and their selection and dimensioning. The placing of field equipment into a process. The installing principles of field equipment and the accessories used in installation.

EUR-ACE ENGINEERING PRCATICE
You will understand the implications of field device installation locations and practices for system functionality. You will be able to draft and interpret documents related to field equipment installation technology and their selection, and you will understand the role of standards as part of a engineering project.

Content

Sensors
Control valves and their selection and dimensioning.
The placing of field equipment into a process.
The installing principles of field equipment and the documentation

Learning materials and recommended literature

Sivonen, M. 2001. Teollisuuden instrumentointi: rakenne ja suunnittelu. Helsinki: AEL.

Häkkinen, V-M. 2020. Kenttälaitteet. Kurssimateriaali, AMK. Jyväskylän ammattikorkeakoulu, Tekniikan ala.

Teaching methods

The automation engineering entities is inherently problem-oriented and therefore it is also used as a learning method. Concretely, it is done through contact hours, returnable exercises and independent work.

Exam dates and retake possibilities

Passing exam at the time announced in Moodle and two re-examinations.

Alternative completion methods

Discuss on a case-by-case basis.

Student workload

Lectures 16 h, Tutorial lessons 4 h, independent work 34 h, a total of 54 hours of learning work.

Further information for students

Self-assessment takes place mainly through learning tasks. The assessment decision is based 100% on the competence shown in the exam.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but doing holistic field device engineering is challenging.

Evaluation criteria, good (3-4)

Good (3): You know the most common field devices and the basics of their placement, installation methods, installation documentation, and installation materials. You can select and dimension field devices suitable for basic processes.

Very good (4): You master the key issues and know how to apply them in a variety of ways in projects.

Evaluation criteria, excellent (5)

Excellent (5): You master the key issues and are able to apply them, outlining different alternative functional total solutions.

Prerequisites

Basic knowledge of physics and measurement technology

Enrollment

01.08.2023 - 24.08.2023

Timing

01.08.2023 - 15.10.2023

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • English
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Veli-Matti Häkkinen
Groups
  • TAR22S1
    Bachelor's Degree Programme in Automation and Robotics

Objectives

Control valves and their selection and dimensioning. The placing of field equipment into a process. The installing principles of field equipment and the accessories used in installation.

EUR-ACE ENGINEERING PRCATICE
You will understand the implications of field device installation locations and practices for system functionality. You will be able to draft and interpret documents related to field equipment installation technology and their selection, and you will understand the role of standards as part of a engineering project.

Content

Sensors
Control valves and their selection and dimensioning.
The placing of field equipment into a process.
The installing principles of field equipment and the documentation

Learning materials and recommended literature

Sivonen, M. 2001. Teollisuuden instrumentointi: rakenne ja suunnittelu. Helsinki: AEL.

Häkkinen, V-M. 2020. Kenttälaitteet. Kurssimateriaali, AMK. Jyväskylän ammattikorkeakoulu, Tekniikan ala.

Teaching methods

The automation engineering entities is inherently problem-oriented and therefore it is also used as a learning method. Concretely, it is done through contact hours, returnable exercises and independent work.

Exam dates and retake possibilities

Passing exam at the time announced in Moodle and two re-examinations.

Alternative completion methods

Discuss on a case-by-case basis.

Student workload

Lectures 16 h, Tutorial lessons 4 h, independent work 34 h, a total of 54 hours of learning work.

Further information for students

Self-assessment takes place mainly through learning tasks. The assessment decision is based 100% on the competence shown in the exam.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but doing holistic field device engineering is challenging.

Evaluation criteria, good (3-4)

Good (3): You know the most common field devices and the basics of their placement, installation methods, installation documentation, and installation materials. You can select and dimension field devices suitable for basic processes.

Very good (4): You master the key issues and know how to apply them in a variety of ways in projects.

Evaluation criteria, excellent (5)

Excellent (5): You master the key issues and are able to apply them, outlining different alternative functional total solutions.

Prerequisites

Basic knowledge of physics and measurement technology

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 01.03.2023

Number of ECTS credits allocated

2 op

Virtual portion

1 op

Mode of delivery

50 % Face-to-face, 50 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Veli-Matti Häkkinen
Groups
  • TSA22KMA
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

Control valves and their selection and dimensioning. The placing of field equipment into a process. The installing principles of field equipment and the accessories used in installation.

EUR-ACE ENGINEERING PRCATICE
You will understand the implications of field device installation locations and practices for system functionality. You will be able to draft and interpret documents related to field equipment installation technology and their selection, and you will understand the role of standards as part of a engineering project.

Content

Sensors
Control valves and their selection and dimensioning.
The placing of field equipment into a process.
The installing principles of field equipment and the documentation

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but doing holistic field device engineering is challenging.

Evaluation criteria, good (3-4)

Good (3): You know the most common field devices and the basics of their placement, installation methods, installation documentation, and installation materials. You can select and dimension field devices suitable for basic processes.

Very good (4): You master the key issues and know how to apply them in a variety of ways in projects.

Evaluation criteria, excellent (5)

Excellent (5): You master the key issues and are able to apply them, outlining different alternative functional total solutions.

Prerequisites

Basic knowledge of physics and measurement technology

Enrollment

01.08.2022 - 25.08.2022

Timing

29.08.2022 - 23.09.2022

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Veli-Matti Häkkinen
Groups
  • TSA21SA
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

Control valves and their selection and dimensioning. The placing of field equipment into a process. The installing principles of field equipment and the accessories used in installation.

EUR-ACE ENGINEERING PRCATICE
You will understand the implications of field device installation locations and practices for system functionality. You will be able to draft and interpret documents related to field equipment installation technology and their selection, and you will understand the role of standards as part of a engineering project.

Content

Sensors
Control valves and their selection and dimensioning.
The placing of field equipment into a process.
The installing principles of field equipment and the documentation

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but doing holistic field device engineering is challenging.

Evaluation criteria, good (3-4)

Good (3): You know the most common field devices and the basics of their placement, installation methods, installation documentation, and installation materials. You can select and dimension field devices suitable for basic processes.

Very good (4): You master the key issues and know how to apply them in a variety of ways in projects.

Evaluation criteria, excellent (5)

Excellent (5): You master the key issues and are able to apply them, outlining different alternative functional total solutions.

Prerequisites

Basic knowledge of physics and measurement technology

Enrollment

01.11.2021 - 09.01.2022

Timing

01.01.2022 - 15.05.2022

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Veli-Matti Häkkinen
Groups
  • TSA21KM
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

Control valves and their selection and dimensioning. The placing of field equipment into a process. The installing principles of field equipment and the accessories used in installation.

EUR-ACE ENGINEERING PRCATICE
You will understand the implications of field device installation locations and practices for system functionality. You will be able to draft and interpret documents related to field equipment installation technology and their selection, and you will understand the role of standards as part of a engineering project.

Content

Sensors
Control valves and their selection and dimensioning.
The placing of field equipment into a process.
The installing principles of field equipment and the documentation

Learning materials and recommended literature

Sivonen, M. 2001. Teollisuuden instrumentointi: rakenne ja suunnittelu. Helsinki: AEL.

Häkkinen, V-M. 2020. Kenttälaitteet. Kurssimateriaali, AMK. Jyväskylän ammattikorkeakoulu, Tekniikan ala.

Teaching methods

The automation engineering entities is inherently problem-oriented and therefore it is also used as a learning method. Concretely, it is done through contact hours, returnable exercises and independent work.

Exam dates and retake possibilities

Passing exam at the time announced in Moodle and two re-examinations.

Alternative completion methods

Discuss on a case-by-case basis.

Student workload

Lectures 16 h, Tutorial lessons 4 h, independent work 34 h, a total of 54 hours of learning work.

Further information for students

Self-assessment takes place mainly through learning tasks. The assessment decision is based 100% on the competence shown in the exam.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but doing holistic field device engineering is challenging.

Evaluation criteria, good (3-4)

Good (3): You know the most common field devices and the basics of their placement, installation methods, installation documentation, and installation materials. You can select and dimension field devices suitable for basic processes.

Very good (4): You master the key issues and know how to apply them in a variety of ways in projects.

Evaluation criteria, excellent (5)

Excellent (5): You master the key issues and are able to apply them, outlining different alternative functional total solutions.

Prerequisites

Basic knowledge of physics and measurement technology