DCS Systems 1Laajuus (4 cr)
Code: TSAAA540
Credits
4 op
Teaching language
- English
Responsible person
- Ari Kuisma
Objective
You undesrstand the structure and the functions of the hardware and software in distributed control system (DCS). You can configure the basic application software loops for the laboratory process and you learn how to test the applications in a real process.
EUR-ACE ENGINEERING PRACTICE
You can configure independently a proper process control according to an initial data. You can configure the basic measurements, final elements, control loops, test your application, and you can tune the control loops. You can find and solve the malfunctions.
Content
Application design for process station and user interface
Hardware and software structure of distributed control systems
Fieldbuses and field devices
Testing
Qualifications
Basic skills and knowledge in logical controls and control systems.
Assessment criteria, satisfactory (1)
Adequate (1): You identify the basic knowledge and terminology but in the interpreting of the essential concepts the skills are still inadequate.
Satisfactory (2): You are familiar with the basic knowledge and terminology but it’s challenging to make engineering independently.
Assessment criteria, good (3)
Good (3): You understand the structure of the distributed control system and the depedencies between different parts. You can configure the basic loops of the application software and can test and tune the application software. You understand the system so deeply that you can find the reasons of malfunctions.
Very good (4): You master the essential knowledge and can apply the knowledge.
Assessment criteria, excellent (5)
Excellent (5): You master the essential knowledge and can apply the knowledge acquired in a creative and innovative manner.
Ilmoittautumisaika
01.11.2024 - 09.01.2025
Ajoitus
13.01.2025 - 18.05.2025
Opintopistemäärä
4 op
Virtuaaliosuus
3 op
Toteutustapa
25 % Lähiopetus, 75 % Verkko-opetus
Yksikkö
Teknologiayksikkö
Toimipiste
Pääkampus
Opetuskielet
- Suomi
Paikat
20 - 30
Koulutus
- Sähkö- ja automaatiotekniikka (AMK)
Opettaja
- Antti Parantainen
Ryhmät
-
TSA23KMAInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
Arviointiasteikko
0-5
Enrollment
01.08.2023 - 22.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
4 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- English
Seats
20 - 35
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Antti Parantainen
Groups
-
TSA22SASähkö- ja automaatiotekniikka (AMK)
Objective
You undesrstand the structure and the functions of the hardware and software in distributed control system (DCS). You can configure the basic application software loops for the laboratory process and you learn how to test the applications in a real process.
EUR-ACE ENGINEERING PRACTICE
You can configure independently a proper process control according to an initial data. You can configure the basic measurements, final elements, control loops, test your application, and you can tune the control loops. You can find and solve the malfunctions.
Content
Application design for process station and user interface
Hardware and software structure of distributed control systems
Fieldbuses and field devices
Testing
Evaluation scale
0-5
Arviointikriteerit, tyydyttävä (1-2)
Adequate (1): You identify the basic knowledge and terminology but in the interpreting of the essential concepts the skills are still inadequate.
Satisfactory (2): You are familiar with the basic knowledge and terminology but it’s challenging to make engineering independently.
Arviointikriteerit, hyvä (3-4)
Good (3): You understand the structure of the distributed control system and the depedencies between different parts. You can configure the basic loops of the application software and can test and tune the application software. You understand the system so deeply that you can find the reasons of malfunctions.
Very good (4): You master the essential knowledge and can apply the knowledge.
Assessment criteria, excellent (5)
Excellent (5): You master the essential knowledge and can apply the knowledge acquired in a creative and innovative manner.
Qualifications
Basic skills and knowledge in logical controls and control systems.
Enrollment
01.08.2024 - 22.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
4 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- English
Seats
20 - 35
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Antti Parantainen
Groups
-
TAR22S1Bachelor's Degree Programme in Automation and Robotics
Objective
You undesrstand the structure and the functions of the hardware and software in distributed control system (DCS). You can configure the basic application software loops for the laboratory process and you learn how to test the applications in a real process.
EUR-ACE ENGINEERING PRACTICE
You can configure independently a proper process control according to an initial data. You can configure the basic measurements, final elements, control loops, test your application, and you can tune the control loops. You can find and solve the malfunctions.
Content
Application design for process station and user interface
Hardware and software structure of distributed control systems
Fieldbuses and field devices
Testing
Evaluation scale
0-5
Arviointikriteerit, tyydyttävä (1-2)
Adequate (1): You identify the basic knowledge and terminology but in the interpreting of the essential concepts the skills are still inadequate.
Satisfactory (2): You are familiar with the basic knowledge and terminology but it’s challenging to make engineering independently.
Arviointikriteerit, hyvä (3-4)
Good (3): You understand the structure of the distributed control system and the depedencies between different parts. You can configure the basic loops of the application software and can test and tune the application software. You understand the system so deeply that you can find the reasons of malfunctions.
Very good (4): You master the essential knowledge and can apply the knowledge.
Assessment criteria, excellent (5)
Excellent (5): You master the essential knowledge and can apply the knowledge acquired in a creative and innovative manner.
Qualifications
Basic skills and knowledge in logical controls and control systems.
Ilmoittautumisaika
20.11.2023 - 04.01.2024
Ajoitus
01.01.2024 - 19.05.2024
Opintopistemäärä
4 op
Virtuaaliosuus
3 op
Toteutustapa
25 % Lähiopetus, 75 % Verkko-opetus
Yksikkö
Teknologiayksikkö
Toimipiste
Pääkampus
Opetuskielet
- Suomi
Paikat
0 - 50
Koulutus
- Sähkö- ja automaatiotekniikka (AMK)
Opettaja
- Ari Kuisma
Ryhmät
-
TSA22KMASähkö- ja automaatiotekniikka (AMK)
Arviointiasteikko
0-5
Ilmoittautumisaika
01.08.2023 - 24.08.2023
Ajoitus
01.08.2023 - 19.12.2023
Opintopistemäärä
4 op
Toteutustapa
Lähiopetus
Yksikkö
Teknologiayksikkö
Toimipiste
Pääkampus
Opetuskielet
- Suomi
Paikat
0 - 30
Koulutus
- Sähkö- ja automaatiotekniikka (AMK)
Opettaja
- Teppo Flyktman
Ryhmät
-
TSA21SASähkö- ja automaatiotekniikka (AMK)
Arviointiasteikko
0-5
Ilmoittautumisaika
01.11.2022 - 05.01.2023
Ajoitus
09.01.2023 - 21.05.2023
Opintopistemäärä
4 op
Virtuaaliosuus
2 op
Toteutustapa
50 % Lähiopetus, 50 % Verkko-opetus
Yksikkö
Teknologiayksikkö
Toimipiste
Pääkampus
Opetuskielet
- Suomi
Koulutus
- Sähkö- ja automaatiotekniikka (AMK)
Opettaja
- Pekka Silvennoinen
Ryhmät
-
TSA21KMASähkö- ja automaatiotekniikka (AMK)
Arviointiasteikko
0-5
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 31.12.2022
Number of ECTS credits allocated
4 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Teppo Flyktman
Groups
-
TSA20SABachelor's Degree Programme in Electrical and Automation Engineering
Objective
You undesrstand the structure and the functions of the hardware and software in distributed control system (DCS). You can configure the basic application software loops for the laboratory process and you learn how to test the applications in a real process.
EUR-ACE ENGINEERING PRACTICE
You can configure independently a proper process control according to an initial data. You can configure the basic measurements, final elements, control loops, test your application, and you can tune the control loops. You can find and solve the malfunctions.
Content
Application design for process station and user interface
Hardware and software structure of distributed control systems
Fieldbuses and field devices
Testing
Evaluation scale
0-5
Arviointikriteerit, tyydyttävä (1-2)
Adequate (1): You identify the basic knowledge and terminology but in the interpreting of the essential concepts the skills are still inadequate.
Satisfactory (2): You are familiar with the basic knowledge and terminology but it’s challenging to make engineering independently.
Arviointikriteerit, hyvä (3-4)
Good (3): You understand the structure of the distributed control system and the depedencies between different parts. You can configure the basic loops of the application software and can test and tune the application software. You understand the system so deeply that you can find the reasons of malfunctions.
Very good (4): You master the essential knowledge and can apply the knowledge.
Assessment criteria, excellent (5)
Excellent (5): You master the essential knowledge and can apply the knowledge acquired in a creative and innovative manner.
Qualifications
Basic skills and knowledge in logical controls and control systems.