Applying Control SystemsLaajuus (2 cr)
Code: TSAAA510
Credits
2 op
Teaching language
- Finnish
Responsible person
- Ari Kuisma
Objective
The course applies the theory of control technology to practice also for slightly more challenging control loops. Studying in this course requires knowledge of the basics of control technology, and you will be able to utilize these lessons when working with control loops.
EUR-ACE ENGINEERING PRACTICE
You will be able to design and tune process controls in the event of disturbances, delays, or nonlinearities, and implement feedforward and cascade controls.
Content
Feedforward controls
Cascade controls
Disturbances, delays and nonlinearities
Testing of control loops
Qualifications
Basic knowledge of control technology
Assessment criteria, satisfactory (1)
Sufficient (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.
Satisfactory (2): You know the basics and terminology, but perceiving the whole is challenging.
Assessment criteria, good (3)
Good (3): You can implement, test and tune the PID controller even for more challenging applications.
Very good (4): You master the key things and know how to apply them in many ways in different control loops.
Assessment criteria, excellent (5)
Excellent (5): You master key things and know how to apply them creatively and innovatively.
Enrollment
01.08.2024 - 22.08.2024
Timing
21.10.2024 - 20.12.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA23KMAInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
Objectives
The course applies the theory of control technology to practice also for slightly more challenging control loops. Studying in this course requires knowledge of the basics of control technology, and you will be able to utilize these lessons when working with control loops.
EUR-ACE ENGINEERING PRACTICE
You will be able to design and tune process controls in the event of disturbances, delays, or nonlinearities, and implement feedforward and cascade controls.
Content
Feedforward controls
Cascade controls
Disturbances, delays and nonlinearities
Testing of control loops
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.
Satisfactory (2): You know the basics and terminology, but perceiving the whole is challenging.
Evaluation criteria, good (3-4)
Good (3): You can implement, test and tune the PID controller even for more challenging applications.
Very good (4): You master the key things and know how to apply them in many ways in different control loops.
Evaluation criteria, excellent (5)
Excellent (5): You master key things and know how to apply them creatively and innovatively.
Prerequisites
Basic knowledge of control technology
Enrollment
20.11.2023 - 04.01.2024
Timing
01.01.2024 - 19.05.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TAR22S1Bachelor's Degree Programme in Automation and Robotics
Objectives
The course applies the theory of control technology to practice also for slightly more challenging control loops. Studying in this course requires knowledge of the basics of control technology, and you will be able to utilize these lessons when working with control loops.
EUR-ACE ENGINEERING PRACTICE
You will be able to design and tune process controls in the event of disturbances, delays, or nonlinearities, and implement feedforward and cascade controls.
Content
Feedforward controls
Cascade controls
Disturbances, delays and nonlinearities
Testing of control loops
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.
Satisfactory (2): You know the basics and terminology, but perceiving the whole is challenging.
Evaluation criteria, good (3-4)
Good (3): You can implement, test and tune the PID controller even for more challenging applications.
Very good (4): You master the key things and know how to apply them in many ways in different control loops.
Evaluation criteria, excellent (5)
Excellent (5): You master key things and know how to apply them creatively and innovatively.
Prerequisites
Basic knowledge of control technology
Enrollment
20.11.2023 - 04.01.2024
Timing
01.01.2024 - 19.05.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA22SASähkö- ja automaatiotekniikka (AMK)
Objectives
The course applies the theory of control technology to practice also for slightly more challenging control loops. Studying in this course requires knowledge of the basics of control technology, and you will be able to utilize these lessons when working with control loops.
EUR-ACE ENGINEERING PRACTICE
You will be able to design and tune process controls in the event of disturbances, delays, or nonlinearities, and implement feedforward and cascade controls.
Content
Feedforward controls
Cascade controls
Disturbances, delays and nonlinearities
Testing of control loops
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.
Satisfactory (2): You know the basics and terminology, but perceiving the whole is challenging.
Evaluation criteria, good (3-4)
Good (3): You can implement, test and tune the PID controller even for more challenging applications.
Very good (4): You master the key things and know how to apply them in many ways in different control loops.
Evaluation criteria, excellent (5)
Excellent (5): You master key things and know how to apply them creatively and innovatively.
Prerequisites
Basic knowledge of control technology
Enrollment
01.08.2023 - 24.08.2023
Timing
16.10.2023 - 19.12.2023
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA22KMASähkö- ja automaatiotekniikka (AMK)
Objectives
The course applies the theory of control technology to practice also for slightly more challenging control loops. Studying in this course requires knowledge of the basics of control technology, and you will be able to utilize these lessons when working with control loops.
EUR-ACE ENGINEERING PRACTICE
You will be able to design and tune process controls in the event of disturbances, delays, or nonlinearities, and implement feedforward and cascade controls.
Content
Feedforward controls
Cascade controls
Disturbances, delays and nonlinearities
Testing of control loops
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.
Satisfactory (2): You know the basics and terminology, but perceiving the whole is challenging.
Evaluation criteria, good (3-4)
Good (3): You can implement, test and tune the PID controller even for more challenging applications.
Very good (4): You master the key things and know how to apply them in many ways in different control loops.
Evaluation criteria, excellent (5)
Excellent (5): You master key things and know how to apply them creatively and innovatively.
Prerequisites
Basic knowledge of control technology
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 21.05.2023
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA21SASähkö- ja automaatiotekniikka (AMK)
Objectives
The course applies the theory of control technology to practice also for slightly more challenging control loops. Studying in this course requires knowledge of the basics of control technology, and you will be able to utilize these lessons when working with control loops.
EUR-ACE ENGINEERING PRACTICE
You will be able to design and tune process controls in the event of disturbances, delays, or nonlinearities, and implement feedforward and cascade controls.
Content
Feedforward controls
Cascade controls
Disturbances, delays and nonlinearities
Testing of control loops
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.
Satisfactory (2): You know the basics and terminology, but perceiving the whole is challenging.
Evaluation criteria, good (3-4)
Good (3): You can implement, test and tune the PID controller even for more challenging applications.
Very good (4): You master the key things and know how to apply them in many ways in different control loops.
Evaluation criteria, excellent (5)
Excellent (5): You master key things and know how to apply them creatively and innovatively.
Prerequisites
Basic knowledge of control technology
Enrollment
01.08.2022 - 25.08.2022
Timing
24.10.2022 - 31.12.2022
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA21KMASähkö- ja automaatiotekniikka (AMK)
Objectives
The course applies the theory of control technology to practice also for slightly more challenging control loops. Studying in this course requires knowledge of the basics of control technology, and you will be able to utilize these lessons when working with control loops.
EUR-ACE ENGINEERING PRACTICE
You will be able to design and tune process controls in the event of disturbances, delays, or nonlinearities, and implement feedforward and cascade controls.
Content
Feedforward controls
Cascade controls
Disturbances, delays and nonlinearities
Testing of control loops
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.
Satisfactory (2): You know the basics and terminology, but perceiving the whole is challenging.
Evaluation criteria, good (3-4)
Good (3): You can implement, test and tune the PID controller even for more challenging applications.
Very good (4): You master the key things and know how to apply them in many ways in different control loops.
Evaluation criteria, excellent (5)
Excellent (5): You master key things and know how to apply them creatively and innovatively.
Prerequisites
Basic knowledge of control technology
Enrollment
01.11.2021 - 09.01.2022
Timing
01.01.2022 - 15.05.2022
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA20SABachelor's Degree Programme in Electrical and Automation Engineering
Objectives
The course applies the theory of control technology to practice also for slightly more challenging control loops. Studying in this course requires knowledge of the basics of control technology, and you will be able to utilize these lessons when working with control loops.
EUR-ACE ENGINEERING PRACTICE
You will be able to design and tune process controls in the event of disturbances, delays, or nonlinearities, and implement feedforward and cascade controls.
Content
Feedforward controls
Cascade controls
Disturbances, delays and nonlinearities
Testing of control loops
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.
Satisfactory (2): You know the basics and terminology, but perceiving the whole is challenging.
Evaluation criteria, good (3-4)
Good (3): You can implement, test and tune the PID controller even for more challenging applications.
Very good (4): You master the key things and know how to apply them in many ways in different control loops.
Evaluation criteria, excellent (5)
Excellent (5): You master key things and know how to apply them creatively and innovatively.
Prerequisites
Basic knowledge of control technology