Skip to main content

Physics 3 - Electromagnetism and WavesLaajuus (4 cr)

Code: TZLF8010

Credits

4 op

Teaching language

  • Finnish
  • English

Responsible person

  • Tuomas Huopana

Objective

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Qualifications

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Assessment criteria, satisfactory (1)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Assessment criteria, good (3)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Assessment criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV23S2
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

The course is implemented on 13th January 2025 - 30th April 2025.

Learning materials and recommended literature

The course material is provided by the teacher.

Literature in Finnish:
-Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
-Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Literature in English:
-Knight, R. D. (2013). Physics for scientists and engineers: A strategic approach with modern physics (3rd ed., [international edition].). Boston: Pearson Education.
-Ali Hamed, S. M. (2018). Electromagnetics for engineering students: Part 2. Bentham Science Publishers. (E-book)
-Franceschetti, G. a. (1997). Electromagnetics: Theory, Techniques, and Engineering Paradigms (1st ed. 1997.). Springer US. (E-book)

Teaching methods

The course covers lectures in the classroom and home exercises.

Practical training and working life connections

The content of the course aims to be working life connected.

Exam dates and retake possibilities

The course exam dates and deadlines for home exercises are announced in the first lecture. You are allowed to do the renewal exam two times during the semester.

Alternative completion methods

The approval procedures are described in the degree regulations and the study guide. The teacher of the course provides additional information about possible alternative course completion procedures.

Student workload

One credit corresponds to a workload of 27 hours. In total, the course requires 108 hours of work.

Further information for students

The assessment is based on exam or exams and points collected from calculation exercises. In contact teaching, the attendance requirement is 80 %. The exam will be held in the classroom only. There is no remote exam option with this implementation.

The student must participate in the first contact lesson or inform the course teacher about participating in the course during the first week of the course.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV23S3
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

The course is implemented on 13th January 2025 - 30th April 2025.

Learning materials and recommended literature

The course material is provided by the teacher.

Literature in Finnish:
-Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
-Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Literature in English:
-Knight, R. D. (2013). Physics for scientists and engineers: A strategic approach with modern physics (3rd ed., [international edition].). Boston: Pearson Education.
-Ali Hamed, S. M. (2018). Electromagnetics for engineering students: Part 2. Bentham Science Publishers. (E-book)
-Franceschetti, G. a. (1997). Electromagnetics: Theory, Techniques, and Engineering Paradigms (1st ed. 1997.). Springer US. (E-book)

Teaching methods

The course covers lectures in the classroom and home exercises.

Practical training and working life connections

The content of the course aims to be working life connected.

Exam dates and retake possibilities

The course exam dates and deadlines for home exercises are announced in the first lecture. You are allowed to do the renewal exam two times during the semester.

Alternative completion methods

The approval procedures are described in the degree regulations and the study guide. The teacher of the course provides additional information about possible alternative course completion procedures.

Student workload

One credit corresponds to a workload of 27 hours. In total, the course requires 108 hours of work.

Further information for students

The assessment is based on exam or exams and points collected from calculation exercises. In contact teaching, the attendance requirement is 80 %. The exam will be held in the classroom only. There is no remote exam option with this implementation.

The student must participate in the first contact lesson or inform the course teacher about participating in the course during the first week of the course.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV23S5
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

The course is implemented on 13th January 2025 - 30th April 2025.

Learning materials and recommended literature

The course material is provided by the teacher.

Literature in Finnish:
-Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
-Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Literature in English:
-Knight, R. D. (2013). Physics for scientists and engineers: A strategic approach with modern physics (3rd ed., [international edition].). Boston: Pearson Education.
-Ali Hamed, S. M. (2018). Electromagnetics for engineering students: Part 2. Bentham Science Publishers. (E-book)
-Franceschetti, G. a. (1997). Electromagnetics: Theory, Techniques, and Engineering Paradigms (1st ed. 1997.). Springer US. (E-book)

Teaching methods

The course covers lectures in the classroom and home exercises.

Practical training and working life connections

The content of the course aims to be working life connected.

Exam dates and retake possibilities

The course exam dates and deadlines for home exercises are announced in the first lecture. You are allowed to do the renewal exam two times during the semester.

Alternative completion methods

The approval procedures are described in the degree regulations and the study guide. The teacher of the course provides additional information about possible alternative course completion procedures.

Student workload

One credit corresponds to a workload of 27 hours. In total, the course requires 108 hours of work.

Further information for students

The assessment is based on exam or exams and points collected from calculation exercises. In contact teaching, the attendance requirement is 80 %. The exam will be held in the classroom only. There is no remote exam option with this implementation.

The student must participate in the first contact lesson or inform the course teacher about participating in the course during the first week of the course.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

4 op

Virtual portion

4 op

Mode of delivery

Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV23SM
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

The course is implemented on 13th January 2025 - 30th April 2025.

Learning materials and recommended literature

The course material is provided by the teacher.

Literature in Finnish:
-Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
-Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Literature in English:
-Knight, R. D. (2013). Physics for scientists and engineers: A strategic approach with modern physics (3rd ed., [international edition].). Boston: Pearson Education.
-Ali Hamed, S. M. (2018). Electromagnetics for engineering students: Part 2. Bentham Science Publishers. (E-book)
-Franceschetti, G. a. (1997). Electromagnetics: Theory, Techniques, and Engineering Paradigms (1st ed. 1997.). Springer US. (E-book)

Teaching methods

Virtual lessons, independent work and online work.

Practical training and working life connections

The content of the course aims to be working life connected.

Exam dates and retake possibilities

The course exam dates and deadlines for home exercises are announced in the first lecture.

Alternative completion methods

The approval procedures are described in the degree regulations and the study guide. The teacher of the course provides additional information about possible alternative course completion procedures.

Student workload

One credit corresponds to a workload of 27 hours. In total, the course requires 108 hours of work.

Further information for students

The course assessment is based on exam or exams and points collected from calculation exercises.

The student must confirm the registration by logging into the Moodle pages of the course during the first week of the course. If participation in the course is prevented, the course teacher must be notified during the first week of the course at the latest. It is possible to study the course virtually.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • English
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TIC23S1
    Bachelor's Degree Programme in Information and Communications Technology

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

The course is implemented on 13th January 2025 - 30th April 2025.

Learning materials and recommended literature

The course material is provided by the teacher.

Literature in Finnish:
-Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
-Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Literature in English:
-Knight, R. D. (2013). Physics for scientists and engineers: A strategic approach with modern physics (3rd ed., [international edition].). Boston: Pearson Education.
-Ali Hamed, S. M. (2018). Electromagnetics for engineering students: Part 2. Bentham Science Publishers. (E-book)
-Franceschetti, G. a. (1997). Electromagnetics: Theory, Techniques, and Engineering Paradigms (1st ed. 1997.). Springer US. (E-book)

Teaching methods

The course covers lectures in the classroom and home exercises.

Practical training and working life connections

The content of the course aims to be working life connected.

Exam dates and retake possibilities

The course exam dates and deadlines for home exercises are announced in the first lecture. You are allowed to do the renewal exam two times during the semester.

Alternative completion methods

The approval procedures are described in the degree regulations and the study guide. The teacher of the course provides additional information about possible alternative course completion procedures.

Student workload

One credit corresponds to a workload of 27 hours. In total, the course requires 108 hours of work.

Further information for students

The assessment is based on exam or exams and points collected from calculation exercises. In contact teaching, the attendance requirement is 80 %. The exam will be held in the classroom only. There is no remote exam option with this implementation.

The student must participate in the first contact lesson or inform the course teacher about participating in the course during the first week of the course.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV23S1
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

The course is implemented on 13th January 2025 - 30th April 2025.

Learning materials and recommended literature

The course material is provided by the teacher.

Literature in Finnish:
-Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
-Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Literature in English:
-Knight, R. D. (2013). Physics for scientists and engineers: A strategic approach with modern physics (3rd ed., [international edition].). Boston: Pearson Education.
-Ali Hamed, S. M. (2018). Electromagnetics for engineering students: Part 2. Bentham Science Publishers. (E-book)
-Franceschetti, G. a. (1997). Electromagnetics: Theory, Techniques, and Engineering Paradigms (1st ed. 1997.). Springer US. (E-book)

Teaching methods

The course covers lectures in the classroom and home exercises.

Practical training and working life connections

The content of the course aims to be working life connected.

Exam dates and retake possibilities

The course exam dates and deadlines for home exercises are announced in the first lecture. You are allowed to do the renewal exam two times during the semester.

Alternative completion methods

The approval procedures are described in the degree regulations and the study guide. The teacher of the course provides additional information about possible alternative course completion procedures.

Student workload

One credit corresponds to a workload of 27 hours. In total, the course requires 108 hours of work.

Further information for students

The assessment is based on exam or exams and points collected from calculation exercises. In contact teaching, the attendance requirement is 80 %. The exam will be held in the classroom only. There is no remote exam option with this implementation.

The student must participate in the first contact lesson or inform the course teacher about participating in the course during the first week of the course.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV22S1
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 8.1.2024 - 30.4.2024.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit luokassa, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta ensimmäisen kurssiviikon aikana.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV22S2
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 8.1.2024 - 30.4.2024.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit luokassa, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta ensimmäisen kurssiviikon aikana.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV22S3
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 8.1.2024 - 30.4.2024.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit luokassa, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta ensimmäisen kurssiviikon aikana.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV22S4
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 8.1.2024 - 30.4.2024.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit luokassa, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta ensimmäisen kurssiviikon aikana.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV22S5
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 8.1.2024 - 30.4.2024.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit luokassa, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta ensimmäisen kurssiviikon aikana.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

4 op

Virtual portion

4 op

Mode of delivery

Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV22SM
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 8.1.2024 - 30.4.2024.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Virtuaaliluennot tai kontaktitunnit, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Opiskelijan tulee vahvistaa ilmoittautuminen kirjautumalla kurssin Moodle sivuille ensimmäisen kurssiviikon aikana. Jos kurssille osallistuminen estyy, tulee siitä ilmoittaa kurssin opettajalle viimeistään ensimmäisen kurssiviikon aikana. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

4 op

Virtual portion

4 op

Mode of delivery

Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV22SM2
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 8.1.2024 - 30.4.2024.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Virtuaaliluennot tai kontaktitunnit, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Opiskelijan tulee vahvistaa ilmoittautuminen kirjautumalla kurssin Moodle sivuille ensimmäisen kurssiviikon aikana. Jos kurssille osallistuminen estyy, tulee siitä ilmoittaa kurssin opettajalle viimeistään ensimmäisen kurssiviikon aikana. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • English
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TIC22S1
    Bachelor's Degree Programme in Information and Communications Technology

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

The course is implemented on 8th January 2024 - 30th April 2024.

Learning materials and recommended literature

The course material is provided by the teacher.

Literature in Finnish:
-Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
-Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Literature in English:
-Knight, R. D. (2013). Physics for scientists and engineers: A strategic approach with modern physics (3rd ed., [international edition].). Boston: Pearson Education.
-Ali Hamed, S. M. (2018). Electromagnetics for engineering students: Part 2. Bentham Science Publishers. (E-book)
-Franceschetti, G. a. (1997). Electromagnetics: Theory, Techniques, and Engineering Paradigms (1st ed. 1997.). Springer US. (E-book)

Teaching methods

The course covers lectures in the classroom and home exercises.

Practical training and working life connections

The content of the course aims to be working life connected.

Exam dates and retake possibilities

The course exam dates and deadlines for home exercises are announced in the first lecture. You are allowed to do the renewal exam two times during the semester.

Alternative completion methods

The approval procedures are described in the degree regulations and the study guide. The teacher of the course provides additional information about possible alternative course completion procedures.

Student workload

One credit corresponds to a workload of 27 hours. In total, the course requires 108 hours of work.

Further information for students

The evaluation takes into account the scores in the exam. At the beginning of the course, the teacher provides assignments to collect additional scores. At least 50 % of the maximum scores is required to pass.

If you are prevented from attending the first contact lesson of the course, the course teacher must be notified of the participation in the course.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 28.04.2023

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • English
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TIC21S1
    Bachelor's Degree Programme in Information and Communications Technology

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

The course is implemented on January 9, 2023 - April 28, 2023.

Learning materials and recommended literature

The course material is provided by the teacher.

Literature in Finnish:
-Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
-Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Literature in English:
-Knight, R. D. (2013). Physics for scientists and engineers: A strategic approach with modern physics (3rd ed., [international edition].). Boston: Pearson Education.
-Ali Hamed, S. M. (2018). Electromagnetics for engineering students: Part 2. Bentham Science Publishers. (E-book)
-Franceschetti, G. a. (1997). Electromagnetics: Theory, Techniques, and Engineering Paradigms (1st ed. 1997.). Springer US. (E-book)

Teaching methods

The course covers lectures in the classroom and home exercises.

Practical training and working life connections

The content of the course aims to be working life connected.

Exam dates and retake possibilities

The course exam dates and deadlines for home exercises are announced in the first lecture. You are allowed to do resit exam two times during the semester.

Alternative completion methods

The approval procedures are described in the degree regulations and the study guide. The teacher of the course provides additional information about possible alternative course completion procedures.

Student workload

One credit corresponds to a workload of 27 hours. In total, the course requires 108 hours of work.

Further information for students

The evaluation takes into account the scores in the exam. At the beginning of the course, the teacher provides assignments to collect additional scores. At least 50 % of the maximum scores is required to pass.
If you are prevented from attending the first contact of the course, the course teacher must be notified of the participation in the course.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 28.04.2023

Number of ECTS credits allocated

4 op

Virtual portion

2 op

Mode of delivery

50 % Face-to-face, 50 % Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV21S1
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 9.1.2023 - 28.4.2023.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit tai virtuaaliluennot, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Kontaktiopetukseen osallistuminen on vapaaehtoista, mutta suotavaa. Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 28.04.2023

Number of ECTS credits allocated

4 op

Virtual portion

2 op

Mode of delivery

50 % Face-to-face, 50 % Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV21S2
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 9.1.2023 - 28.4.2023.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit tai virtuaaliluennot, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Kontaktiopetukseen osallistuminen on vapaaehtoista, mutta suotavaa. Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 28.04.2023

Number of ECTS credits allocated

4 op

Virtual portion

2 op

Mode of delivery

50 % Face-to-face, 50 % Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV21S3
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 9.1.2023 - 28.4.2023.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit tai virtuaaliluennot, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Kontaktiopetukseen osallistuminen on vapaaehtoista, mutta suotavaa. Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 28.04.2023

Number of ECTS credits allocated

4 op

Virtual portion

2 op

Mode of delivery

50 % Face-to-face, 50 % Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV21S5
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 9.1.2023 - 28.4.2023.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit tai virtuaaliluennot, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Kontaktiopetukseen osallistuminen on vapaaehtoista, mutta suotavaa. Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 28.04.2023

Number of ECTS credits allocated

4 op

Virtual portion

4 op

Mode of delivery

Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV21SM
    Tieto- ja viestintätekniikka (AMK)

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 9.1.2023 - 28.4.2023.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Virtuaaliluennot tai kontaktitunnit, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Kurssin ohjauksiin osallistuminen on vapaaehtoista, mutta suotavaa. Opiskelijan tulee vahvistaa ilmoittautuminen kirjautumalla kurssin Moodle sivuille ensimmäisen kurssiviikon aikana. Jos kurssille osallistuminen estyy, tulee siitä ilmoittaa kurssin opettajalle viimeistään ensimmäisen kurssiviikon aikana. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2021 - 09.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

4 op

Virtual portion

1 op

Mode of delivery

75 % Face-to-face, 25 % Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV20S1
    Tieto- ja viestintätekniikka

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 10.1.2022 - 29.4.2022.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit tai virtuaaliluennot, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Kontaktiopetukseen osallistuminen on vapaaehtoista, mutta suotavaa. Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2021 - 09.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

4 op

Virtual portion

1 op

Mode of delivery

75 % Face-to-face, 25 % Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV20S2
    Tieto- ja viestintätekniikka

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 10.1.2022 - 29.4.2022.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit tai virtuaaliluennot, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Kontaktiopetukseen osallistuminen on vapaaehtoista, mutta suotavaa. Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2021 - 09.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

4 op

Virtual portion

1 op

Mode of delivery

75 % Face-to-face, 25 % Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV20S3
    Tieto- ja viestintätekniikka

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 10.1.2022 - 29.4.2022.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit tai virtuaaliluennot, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Kontaktiopetukseen osallistuminen on vapaaehtoista, mutta suotavaa. Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2021 - 09.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

4 op

Virtual portion

1 op

Mode of delivery

75 % Face-to-face, 25 % Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV20S5
    Tieto- ja viestintätekniikka

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 10.1.2022 - 29.4.2022.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Kontaktitunnit tai virtuaaliluennot, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Kontaktiopetukseen osallistuminen on vapaaehtoista, mutta suotavaa. Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.

Enrollment

01.11.2021 - 09.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

4 op

Virtual portion

4 op

Mode of delivery

Online learning

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Information and Communications Technology
Teachers
  • Tuomas Huopana
Groups
  • TTV20SM
    Tieto- ja viestintätekniikka

Objectives

Purpose:
You learn about the basic phenomena of electromagnetism and waves, which is a requirement in information technology to understand the devices used in information technology.

EUR-ACE Competences:
Knowledge and understanding
Engineering practice

Learning outcomes:
After completing the course you know basic principles and concepts of mechanical and electromagnetic waves. You
know about the wave behaviour in various substances and interfaces between substances.

You know the basic concepts and principles of electromagnetism. You also know about the physical fundamentals of electric basic components, direct current motor, electric generator, antennas, and optical fibre.

You are able to recognise the physical phenomena discussed in the course and can make assumptions in modelling the phenomena. You are able to use physical models to solve physical problems.

Content

In this course you study the following contents:
- the modelling of wave motion, the intensity and propagation velocity of wave
- wave motion in interfaces between substances
- interference and standing waves
- sound and Doppler effect
- electric charge in electric field
- voltage (potential) and energy in electric field
- conductor and current loop in magnetic field
- electromagnetic induction
- self-inductance and coil
- electromagnetic waves
- antennas
- optical fibers

Time and location

Opintojakso toteutetaan 10.1.2022 - 29.4.2022.

Learning materials and recommended literature

Luentomoniste ja harjoitustehtävät.

Ensisijainen kirjallisuus:
Hautala & Peltonen: Insinöörin (AMK) fysiikka, osa 1, Lahden Teho-Opetus Oy.
Peltonen, Perkkiö & Vierinen: Insinöörin (AMK) fysiikka, osa 2, Lahden Teho-Opetus Oy.

Vaihtoehtoisesti:
Inkinen, Manninen & Tuohi: Momentti Insinöörifysiikka 2, Otava.

Teaching methods

Virtuaaliset ohjaukset, itsenäinen työskentely ja verkkotyöskentely.

Practical training and working life connections

Kurssin sisältö pyritään kytkemään työelämässä esiintyviin ongelmiin.

Exam dates and retake possibilities

Kurssin tenttikäytänteet ilmoitetaan kurssin ensimmäisellä tapaamiskerralla.

Alternative completion methods

Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.

Student workload

Yhden opintopisteen työmäärä vastaa 27 tunnin opiskelutyötä. Yhteensä opiskelutyömäärä (4 op.) kurssilla on 108 tuntia.

Further information for students

Opintojakso arvioidaan kokeen tai kokeiden ja laskuharjoituksista kerättävien pisteiden perusteella.

Opiskelijan tulee osallistua ensimmäiselle kontaktikerralle tai ilmoittaa kurssin opettajalle kurssille osallistumisesta. Kurssi on mahdollista opiskella virtuaalisesti.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient 1:
You recognize the phenomena in the course content and are able to make assumptions concerning some phenomena. Most of the models you use are related to the phenomenon you recognized, and your assignment solving progresses logically.

Satisfactory 2:
You have described the phenomena in the course content but your description of phenomena needs improvement. You are able to make assumptions based on the phenomena and have selected in most cases the suitable physical models. You have solved correctly unknown parameters, but your solutions need improvement.

Evaluation criteria, good (3-4)

Good 3:
You have described the phenomena in the course content correctly and have made the most important assumptions concerning the models you used. You have in most cases reached correct solutions but you have made some miscalculations.

Very good 4:
You have described the phenomena in the course content quite well and made the assumptions needed to model the phenomena. You are able to find alternative solution models to resolve the problem. You have solved the assignments correctly but have made some minor miscalculations.

Evaluation criteria, excellent (5)

Excellent 5:
You have described the phenomena in the course content accurately and have made the correct assumptions for modelling. You are able to evaluate the suitability of various models when solving problems. You have completed the assignments correctly and you may have some oversight in your calculations.

Prerequisites

Simultaneously or before the course you know the basics of vector calculus, trigonometry and differential and integral calculus

Further information

The course is suitable for degree students both as contact and hybrid implementation.