Skip to main content

Process ElectrificationLaajuus (5 cr)

Code: TSASS520

Credits

5 op

Teaching language

  • Finnish

Responsible person

  • Pasi Puttonen

Objective

You will get acquainted with the electrification and engineering practices of the industrial process as well as procurement planning. Studying in this course requires previously acquired electrical engineering design skills. After completing this course, you will be prepared to work as an engineer in industrial electrification.

EUR-ACE ENGINEERING PRACTICE
You know what things to consider when planning a purchase. You control master plan design, placement and cabling planning. You can plan system grounding and equipotential bonding. In addition to process electrification, you have the capability to design electrification for lighting, auxiliary systems, safety systems, escort heating and instrumentation, among other things. You have knowledge of the general electricity distribution network and the electricity network of buildings, you know how to dimension the components of the electricity distribution network and the electricity network of buildings. You have knowledge of the distribution and control of electricity distribution devices and switch gear as well as electrical systems.

Content

Procurement planning
Design of master diagrams
Placement and cabling design
Grounding and equipotential bonding design
Selection and dimensioning of process equipment
Control system design
Backup power system
Instrumentation electrification
Escort heating
Lighting
Building electrification
Electrification of auxiliary systems
Security systems

Qualifications

Basic knowledge and design skills in electrical engineering

Assessment criteria, satisfactory (1)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but applying things is challenging.

Assessment criteria, good (3)

Good (3): You know what things to consider when planning a purchase. You control master plan design and placement and cabling planning. Own capabilities in the design of lighting, auxiliary systems, safety systems, auxiliary heating and instrumentation electrification, among other things.

Very good (4): You master the key things and know how to apply them in a variety of ways.

Assessment criteria, excellent (5)

Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.

Enrollment

01.11.2024 - 09.01.2025

Timing

13.01.2025 - 18.05.2025

Number of ECTS credits allocated

5 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Puttonen
Groups
  • TSA22SS
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

You will get acquainted with the electrification and engineering practices of the industrial process as well as procurement planning. Studying in this course requires previously acquired electrical engineering design skills. After completing this course, you will be prepared to work as an engineer in industrial electrification.

EUR-ACE ENGINEERING PRACTICE
You know what things to consider when planning a purchase. You control master plan design, placement and cabling planning. You can plan system grounding and equipotential bonding. In addition to process electrification, you have the capability to design electrification for lighting, auxiliary systems, safety systems, escort heating and instrumentation, among other things. You have knowledge of the general electricity distribution network and the electricity network of buildings, you know how to dimension the components of the electricity distribution network and the electricity network of buildings. You have knowledge of the distribution and control of electricity distribution devices and switch gear as well as electrical systems.

Content

Procurement planning
Design of master diagrams
Placement and cabling design
Grounding and equipotential bonding design
Selection and dimensioning of process equipment
Control system design
Backup power system
Instrumentation electrification
Escort heating
Lighting
Building electrification
Electrification of auxiliary systems
Security systems

Learning materials and recommended literature

Kuvataan oppimisympäristössä.

Teaching methods

-lectures
-self studies
-distance learning
-laboratory exercises
-exercises
-learning tasks

Exam dates and retake possibilities

The dates and methods of the midterm exams will be announced in the course opening information.

Alternative completion methods

The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.

Student workload

One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exercises, midterm exams and laboratory works.
Avoin AMK: 5

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but applying things is challenging.

Evaluation criteria, good (3-4)

Good (3): You know what things to consider when planning a purchase. You control master plan design and placement and cabling planning. Own capabilities in the design of lighting, auxiliary systems, safety systems, auxiliary heating and instrumentation electrification, among other things.

Very good (4): You master the key things and know how to apply them in a variety of ways.

Evaluation criteria, excellent (5)

Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.

Prerequisites

Basic knowledge and design skills in electrical engineering

Enrollment

01.08.2024 - 22.08.2024

Timing

01.08.2024 - 31.12.2024

Number of ECTS credits allocated

5 op

Virtual portion

4 op

Mode of delivery

20 % Face-to-face, 80 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Puttonen
Groups
  • TSA22KMS
    Sähkö- ja automaatiotekniikka (AMK)
  • ZJA24STSAP
    Avoin amk, Sähköpätevyys, monimuoto

Objectives

You will get acquainted with the electrification and engineering practices of the industrial process as well as procurement planning. Studying in this course requires previously acquired electrical engineering design skills. After completing this course, you will be prepared to work as an engineer in industrial electrification.

EUR-ACE ENGINEERING PRACTICE
You know what things to consider when planning a purchase. You control master plan design, placement and cabling planning. You can plan system grounding and equipotential bonding. In addition to process electrification, you have the capability to design electrification for lighting, auxiliary systems, safety systems, escort heating and instrumentation, among other things. You have knowledge of the general electricity distribution network and the electricity network of buildings, you know how to dimension the components of the electricity distribution network and the electricity network of buildings. You have knowledge of the distribution and control of electricity distribution devices and switch gear as well as electrical systems.

Content

Procurement planning
Design of master diagrams
Placement and cabling design
Grounding and equipotential bonding design
Selection and dimensioning of process equipment
Control system design
Backup power system
Instrumentation electrification
Escort heating
Lighting
Building electrification
Electrification of auxiliary systems
Security systems

Learning materials and recommended literature

Kuvataan oppimisympäristössä.

Teaching methods

-lectures
-self studies
-distance learning
-laboratory exercises
-exercises
-learning tasks

Exam dates and retake possibilities

The dates and methods of the midterm exams will be announced in the course opening information.

Alternative completion methods

The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.

Student workload

One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exercises and midterm exams.
Avoin AMK: 5

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but applying things is challenging.

Evaluation criteria, good (3-4)

Good (3): You know what things to consider when planning a purchase. You control master plan design and placement and cabling planning. Own capabilities in the design of lighting, auxiliary systems, safety systems, auxiliary heating and instrumentation electrification, among other things.

Very good (4): You master the key things and know how to apply them in a variety of ways.

Evaluation criteria, excellent (5)

Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.

Prerequisites

Basic knowledge and design skills in electrical engineering

Enrollment

20.11.2023 - 04.01.2024

Timing

01.01.2024 - 19.05.2024

Number of ECTS credits allocated

5 op

Virtual portion

2 op

Mode of delivery

60 % Face-to-face, 40 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Puttonen
Groups
  • TSA21SB
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

You will get acquainted with the electrification and engineering practices of the industrial process as well as procurement planning. Studying in this course requires previously acquired electrical engineering design skills. After completing this course, you will be prepared to work as an engineer in industrial electrification.

EUR-ACE ENGINEERING PRACTICE
You know what things to consider when planning a purchase. You control master plan design, placement and cabling planning. You can plan system grounding and equipotential bonding. In addition to process electrification, you have the capability to design electrification for lighting, auxiliary systems, safety systems, escort heating and instrumentation, among other things. You have knowledge of the general electricity distribution network and the electricity network of buildings, you know how to dimension the components of the electricity distribution network and the electricity network of buildings. You have knowledge of the distribution and control of electricity distribution devices and switch gear as well as electrical systems.

Content

Procurement planning
Design of master diagrams
Placement and cabling design
Grounding and equipotential bonding design
Selection and dimensioning of process equipment
Control system design
Backup power system
Instrumentation electrification
Escort heating
Lighting
Building electrification
Electrification of auxiliary systems
Security systems

Learning materials and recommended literature

Kuvataan oppimisympäristössä.

Teaching methods

-lectures
-self studies
-distance learning
-laboratory exercises
-exercises
-learning tasks

Exam dates and retake possibilities

The dates and methods of the midterm exams will be announced in the course opening information.

Alternative completion methods

The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.

Student workload

One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exercises, midterm exams and laboratory works.
Avoin AMK: 5

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but applying things is challenging.

Evaluation criteria, good (3-4)

Good (3): You know what things to consider when planning a purchase. You control master plan design and placement and cabling planning. Own capabilities in the design of lighting, auxiliary systems, safety systems, auxiliary heating and instrumentation electrification, among other things.

Very good (4): You master the key things and know how to apply them in a variety of ways.

Evaluation criteria, excellent (5)

Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.

Prerequisites

Basic knowledge and design skills in electrical engineering

Enrollment

01.08.2023 - 24.08.2023

Timing

28.08.2023 - 19.12.2023

Number of ECTS credits allocated

5 op

Virtual portion

3 op

Mode of delivery

40 % Face-to-face, 60 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 25

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Puttonen
Groups
  • TSA21KMB
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

You will get acquainted with the electrification and engineering practices of the industrial process as well as procurement planning. Studying in this course requires previously acquired electrical engineering design skills. After completing this course, you will be prepared to work as an engineer in industrial electrification.

EUR-ACE ENGINEERING PRACTICE
You know what things to consider when planning a purchase. You control master plan design, placement and cabling planning. You can plan system grounding and equipotential bonding. In addition to process electrification, you have the capability to design electrification for lighting, auxiliary systems, safety systems, escort heating and instrumentation, among other things. You have knowledge of the general electricity distribution network and the electricity network of buildings, you know how to dimension the components of the electricity distribution network and the electricity network of buildings. You have knowledge of the distribution and control of electricity distribution devices and switch gear as well as electrical systems.

Content

Procurement planning
Design of master diagrams
Placement and cabling design
Grounding and equipotential bonding design
Selection and dimensioning of process equipment
Control system design
Backup power system
Instrumentation electrification
Escort heating
Lighting
Building electrification
Electrification of auxiliary systems
Security systems

Learning materials and recommended literature

Kuvataan oppimisympäristössä.

Teaching methods

-lectures
-self studies
-distance learning
-laboratory exercises
-exercises
-learning tasks

Exam dates and retake possibilities

The dates and methods of the midterm exams will be announced in the course opening information.

Alternative completion methods

The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.

Student workload

One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exercises and midterm exams.
Avoin AMK: 5

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but applying things is challenging.

Evaluation criteria, good (3-4)

Good (3): You know what things to consider when planning a purchase. You control master plan design and placement and cabling planning. Own capabilities in the design of lighting, auxiliary systems, safety systems, auxiliary heating and instrumentation electrification, among other things.

Very good (4): You master the key things and know how to apply them in a variety of ways.

Evaluation criteria, excellent (5)

Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.

Prerequisites

Basic knowledge and design skills in electrical engineering

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 21.05.2023

Number of ECTS credits allocated

5 op

Virtual portion

2 op

Mode of delivery

60 % Face-to-face, 40 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 30

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Puttonen
Groups
  • TSA20SB
    Bachelor's Degree Programme in Electrical and Automation Engineering

Objectives

You will get acquainted with the electrification and engineering practices of the industrial process as well as procurement planning. Studying in this course requires previously acquired electrical engineering design skills. After completing this course, you will be prepared to work as an engineer in industrial electrification.

EUR-ACE ENGINEERING PRACTICE
You know what things to consider when planning a purchase. You control master plan design, placement and cabling planning. You can plan system grounding and equipotential bonding. In addition to process electrification, you have the capability to design electrification for lighting, auxiliary systems, safety systems, escort heating and instrumentation, among other things. You have knowledge of the general electricity distribution network and the electricity network of buildings, you know how to dimension the components of the electricity distribution network and the electricity network of buildings. You have knowledge of the distribution and control of electricity distribution devices and switch gear as well as electrical systems.

Content

Procurement planning
Design of master diagrams
Placement and cabling design
Grounding and equipotential bonding design
Selection and dimensioning of process equipment
Control system design
Backup power system
Instrumentation electrification
Escort heating
Lighting
Building electrification
Electrification of auxiliary systems
Security systems

Learning materials and recommended literature

Kuvataan oppimisympäristössä.

Teaching methods

-lectures
-self studies
-distance learning
-laboratory exercises
-exercises
-learning tasks

Exam dates and retake possibilities

The dates and methods of the midterm exams will be announced in the course opening information.

Alternative completion methods

The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.

Student workload

One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exercises and midterm exams.
Avoin AMK: 5

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You recognize the basics and terminology, but you have shortcomings in interpreting the key issues.

Satisfactory (2): You know the basics and terminology, but applying things is challenging.

Evaluation criteria, good (3-4)

Good (3): You know what things to consider when planning a purchase. You control master plan design and placement and cabling planning. Own capabilities in the design of lighting, auxiliary systems, safety systems, auxiliary heating and instrumentation electrification, among other things.

Very good (4): You master the key things and know how to apply them in a variety of ways.

Evaluation criteria, excellent (5)

Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.

Prerequisites

Basic knowledge and design skills in electrical engineering