Basics of Electric Power EngineeringLaajuus (5 cr)
Code: TSASS610
Credits
5 op
Teaching language
- Finnish
Responsible person
- Pasi Puttonen
Objective
You will gain a basic knowledge of the aspects of electric power technology and become more deeply acquainted with the calculation of connected 3-phase circuits. Studying in this course requires basic knowledge of electrical engineering and you need these studies e.g. in other courses in this module.
EUR-ACE ENGINEERING PRACTICE
You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured. You also know the measurements related to the quality of electricity. You can use mathematical methods and tools to describe phenomena in the field and solve problems.
Content
Symmetrical and asymmetrical 3-phase system
Power quantities of alternating current circuits
Voltage drop
Reactive power compensation
Harmonic theory
The phenomenon of change
Electrostatics and electrical strength
Measurement of current, voltage and power in an electric power system, energy measurement
Measurements related to electricity quality
Introduction to electro mechanics (electrical machines and transformers)
Presentation of electrical plant and lighting technology
Introduction to electrical drives and power electronics
Electricity generation plants at a general level
Real estate electricity networks
Electrical safety and electrical qualifications
Qualifications
Basic knowledge of electrical engineering
Assessment criteria, satisfactory (1)
Adequate (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Assessment criteria, good (3)
Good (3): Student: You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured.
Very good (4): You master the key things and know how to apply them in a variety of ways.
Assessment criteria, excellent (5)
Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.
Enrollment
01.11.2024 - 09.01.2025
Timing
13.01.2025 - 18.05.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
20 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
- Jussi Tarvainen
Groups
-
TSA24KMSInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
-
ZJA25KTSAPAvoin amk, Sähköpätevyys, monimuoto
Objectives
You will gain a basic knowledge of the aspects of electric power technology and become more deeply acquainted with the calculation of connected 3-phase circuits. Studying in this course requires basic knowledge of electrical engineering and you need these studies e.g. in other courses in this module.
EUR-ACE ENGINEERING PRACTICE
You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured. You also know the measurements related to the quality of electricity. You can use mathematical methods and tools to describe phenomena in the field and solve problems.
Content
Symmetrical and asymmetrical 3-phase system
Power quantities of alternating current circuits
Voltage drop
Reactive power compensation
Harmonic theory
The phenomenon of change
Electrostatics and electrical strength
Measurement of current, voltage and power in an electric power system, energy measurement
Measurements related to electricity quality
Introduction to electro mechanics (electrical machines and transformers)
Presentation of electrical plant and lighting technology
Introduction to electrical drives and power electronics
Electricity generation plants at a general level
Real estate electricity networks
Electrical safety and electrical qualifications
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently performed and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons. This study unit includes also laboratory works
Exam dates and retake possibilities
Examination (spring 2024)
Resit 1 (spring 2024)
Student workload
Total study work 135 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exam.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good (3): Student: You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured.
Very good (4): You master the key things and know how to apply them in a variety of ways.
Evaluation criteria, excellent (5)
Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.08.2024 - 22.08.2024
Timing
26.08.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Virtual portion
1 op
Mode of delivery
80 % Face-to-face, 20 % Online learning
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- Finnish
Seats
20 - 35
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
- Vesa Hytönen
Groups
-
TSA23SSInsinööri (AMK), sähkö- ja automaatiotekniikka, päivätoteutus
-
ZJA24STSAPAvoin amk, Sähköpätevyys, monimuoto
Objectives
You will gain a basic knowledge of the aspects of electric power technology and become more deeply acquainted with the calculation of connected 3-phase circuits. Studying in this course requires basic knowledge of electrical engineering and you need these studies e.g. in other courses in this module.
EUR-ACE ENGINEERING PRACTICE
You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured. You also know the measurements related to the quality of electricity. You can use mathematical methods and tools to describe phenomena in the field and solve problems.
Content
Symmetrical and asymmetrical 3-phase system
Power quantities of alternating current circuits
Voltage drop
Reactive power compensation
Harmonic theory
The phenomenon of change
Electrostatics and electrical strength
Measurement of current, voltage and power in an electric power system, energy measurement
Measurements related to electricity quality
Introduction to electro mechanics (electrical machines and transformers)
Presentation of electrical plant and lighting technology
Introduction to electrical drives and power electronics
Electricity generation plants at a general level
Real estate electricity networks
Electrical safety and electrical qualifications
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently performed and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons. This study unit includes also laboratory works
Exam dates and retake possibilities
Examination (autumn 2024)
Resit 1 (autumn 2024)
Resit 2 (autumn 2024)
Student workload
Total study work 135 hours.
Further information for students
In accordance with the guidelines of Institute of Information Technology, this course has an 80% attendance requirement. Attendance is tracked using the Moodle attendance tool. Absences will be agreed with the teacher for justified reasons (e.g. in case of illness or otherwise demonstrated competence).
All course assignments (including exam, seminar and laboratory work) must be completed in order to receive a pass.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good (3): Student: You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured.
Very good (4): You master the key things and know how to apply them in a variety of ways.
Evaluation criteria, excellent (5)
Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
20.11.2023 - 04.01.2024
Timing
08.01.2024 - 19.05.2024
Number of ECTS credits allocated
5 op
Virtual portion
3 op
Mode of delivery
40 % Face-to-face, 60 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA23KMSInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
Objectives
You will gain a basic knowledge of the aspects of electric power technology and become more deeply acquainted with the calculation of connected 3-phase circuits. Studying in this course requires basic knowledge of electrical engineering and you need these studies e.g. in other courses in this module.
EUR-ACE ENGINEERING PRACTICE
You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured. You also know the measurements related to the quality of electricity. You can use mathematical methods and tools to describe phenomena in the field and solve problems.
Content
Symmetrical and asymmetrical 3-phase system
Power quantities of alternating current circuits
Voltage drop
Reactive power compensation
Harmonic theory
The phenomenon of change
Electrostatics and electrical strength
Measurement of current, voltage and power in an electric power system, energy measurement
Measurements related to electricity quality
Introduction to electro mechanics (electrical machines and transformers)
Presentation of electrical plant and lighting technology
Introduction to electrical drives and power electronics
Electricity generation plants at a general level
Real estate electricity networks
Electrical safety and electrical qualifications
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently performed and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons. This study unit includes also laboratory works
Exam dates and retake possibilities
Examination (spring 2024)
Resit 1 (spring 2024)
Student workload
Total study work 135 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exam.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good (3): Student: You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured.
Very good (4): You master the key things and know how to apply them in a variety of ways.
Evaluation criteria, excellent (5)
Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.08.2023 - 24.08.2023
Timing
01.08.2023 - 19.12.2023
Number of ECTS credits allocated
5 op
Virtual portion
1 op
Mode of delivery
80 % Face-to-face, 20 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
Groups
-
TSA22SSSähkö- ja automaatiotekniikka (AMK)
Objectives
You will gain a basic knowledge of the aspects of electric power technology and become more deeply acquainted with the calculation of connected 3-phase circuits. Studying in this course requires basic knowledge of electrical engineering and you need these studies e.g. in other courses in this module.
EUR-ACE ENGINEERING PRACTICE
You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured. You also know the measurements related to the quality of electricity. You can use mathematical methods and tools to describe phenomena in the field and solve problems.
Content
Symmetrical and asymmetrical 3-phase system
Power quantities of alternating current circuits
Voltage drop
Reactive power compensation
Harmonic theory
The phenomenon of change
Electrostatics and electrical strength
Measurement of current, voltage and power in an electric power system, energy measurement
Measurements related to electricity quality
Introduction to electro mechanics (electrical machines and transformers)
Presentation of electrical plant and lighting technology
Introduction to electrical drives and power electronics
Electricity generation plants at a general level
Real estate electricity networks
Electrical safety and electrical qualifications
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently performed and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons. This study unit includes also laboratory works
Exam dates and retake possibilities
Examination (autumn 2023)
Resit 1 (autumn 2023)
Resit 2 (autumn 2023)
Student workload
Total study work 135 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exam.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good (3): Student: You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured.
Very good (4): You master the key things and know how to apply them in a variety of ways.
Evaluation criteria, excellent (5)
Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 21.05.2023
Number of ECTS credits allocated
5 op
Virtual portion
2 op
Mode of delivery
60 % Face-to-face, 40 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
- Vesa Hytönen
Groups
-
TSA22KMSSähkö- ja automaatiotekniikka (AMK)
Objectives
You will gain a basic knowledge of the aspects of electric power technology and become more deeply acquainted with the calculation of connected 3-phase circuits. Studying in this course requires basic knowledge of electrical engineering and you need these studies e.g. in other courses in this module.
EUR-ACE ENGINEERING PRACTICE
You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured. You also know the measurements related to the quality of electricity. You can use mathematical methods and tools to describe phenomena in the field and solve problems.
Content
Symmetrical and asymmetrical 3-phase system
Power quantities of alternating current circuits
Voltage drop
Reactive power compensation
Harmonic theory
The phenomenon of change
Electrostatics and electrical strength
Measurement of current, voltage and power in an electric power system, energy measurement
Measurements related to electricity quality
Introduction to electro mechanics (electrical machines and transformers)
Presentation of electrical plant and lighting technology
Introduction to electrical drives and power electronics
Electricity generation plants at a general level
Real estate electricity networks
Electrical safety and electrical qualifications
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently performed and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons. This study unit includes also laboratory works
Exam dates and retake possibilities
Examination (spring 2023)
Resit 1 (spring 2023)
Resit 2 (spring 2023)
Student workload
Total study work 135 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exam.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good (3): Student: You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured.
Very good (4): You master the key things and know how to apply them in a variety of ways.
Evaluation criteria, excellent (5)
Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 31.12.2022
Number of ECTS credits allocated
5 op
Virtual portion
1 op
Mode of delivery
80 % Face-to-face, 20 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
- Vesa Hytönen
Groups
-
TSA21SBSähkö- ja automaatiotekniikka (AMK)
Objectives
You will gain a basic knowledge of the aspects of electric power technology and become more deeply acquainted with the calculation of connected 3-phase circuits. Studying in this course requires basic knowledge of electrical engineering and you need these studies e.g. in other courses in this module.
EUR-ACE ENGINEERING PRACTICE
You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured. You also know the measurements related to the quality of electricity. You can use mathematical methods and tools to describe phenomena in the field and solve problems.
Content
Symmetrical and asymmetrical 3-phase system
Power quantities of alternating current circuits
Voltage drop
Reactive power compensation
Harmonic theory
The phenomenon of change
Electrostatics and electrical strength
Measurement of current, voltage and power in an electric power system, energy measurement
Measurements related to electricity quality
Introduction to electro mechanics (electrical machines and transformers)
Presentation of electrical plant and lighting technology
Introduction to electrical drives and power electronics
Electricity generation plants at a general level
Real estate electricity networks
Electrical safety and electrical qualifications
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently performed and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons. This study unit includes also laboratory works
Exam dates and retake possibilities
Examination (autumn 2022)
Resit 1 (autumn 2022)
Resit 2 (autumn 2022)
Student workload
Total study work 135 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exam.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good (3): Student: You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured.
Very good (4): You master the key things and know how to apply them in a variety of ways.
Evaluation criteria, excellent (5)
Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.11.2021 - 09.01.2022
Timing
01.01.2022 - 15.05.2022
Number of ECTS credits allocated
5 op
Virtual portion
2 op
Mode of delivery
60 % Face-to-face, 40 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
10 - 50
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
- Vesa Hytönen
Groups
-
TSA21KMSähkö- ja automaatiotekniikka (AMK)
Objectives
You will gain a basic knowledge of the aspects of electric power technology and become more deeply acquainted with the calculation of connected 3-phase circuits. Studying in this course requires basic knowledge of electrical engineering and you need these studies e.g. in other courses in this module.
EUR-ACE ENGINEERING PRACTICE
You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured. You also know the measurements related to the quality of electricity. You can use mathematical methods and tools to describe phenomena in the field and solve problems.
Content
Symmetrical and asymmetrical 3-phase system
Power quantities of alternating current circuits
Voltage drop
Reactive power compensation
Harmonic theory
The phenomenon of change
Electrostatics and electrical strength
Measurement of current, voltage and power in an electric power system, energy measurement
Measurements related to electricity quality
Introduction to electro mechanics (electrical machines and transformers)
Presentation of electrical plant and lighting technology
Introduction to electrical drives and power electronics
Electricity generation plants at a general level
Real estate electricity networks
Electrical safety and electrical qualifications
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently performed and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons. This study unit includes also laboratory works
Exam dates and retake possibilities
Examination (spring 2022)
Resit 1 (spring 2022)
Resit 2 (spring 2022)
Student workload
Total study work 135 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the exam.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good (3): Student: You know the basic calculation of connected 3-phase circuits and are well acquainted with different concepts of power. You understand the effect of reactive power and harmonics in an electric power system. You know how the basic quantities of an electric power system are measured.
Very good (4): You master the key things and know how to apply them in a variety of ways.
Evaluation criteria, excellent (5)
Excellent (5): You master the key things and know how to apply them in many ways. You are an expert.
Prerequisites
Basic knowledge of electrical engineering