HMI-ProgrammingLaajuus (5 cr)
Code: TSAAA530
Credits
5 op
Teaching language
- English
Responsible person
- Teppo Flyktman
Objective
You become familiar with the user interface design for programmable logic controllers in theory and in practice. You are able to implement a human machine interface utilizing operating panel or supervisory control and data acquisition system. Basic knowledge of the automation technology and programmable logic controllers is prerequisite for participation.
EUR-ACE ENGINEERING PRACTICE
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
EUR-ACE COMMUNICATION AND TEAM-WORKING
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Content
User interface design and usability
Human machine interfaces
Operating panels
Supervisory Control and Data Acquisition systems
Qualifications
Basic knowledge related to the automation technology
Basic knowledge related to programmable logic controllers including hardware and software
Assessment criteria, approved/failed
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Enrollment
01.11.2024 - 09.01.2025
Timing
13.01.2025 - 18.05.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- English
Seats
20 - 35
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Groups
-
TSA23SAInsinööri (AMK), sähkö- ja automaatiotekniikka, päivätoteutus
Objectives
You become familiar with the user interface design for programmable logic controllers in theory and in practice. You are able to implement a human machine interface utilizing operating panel or supervisory control and data acquisition system. Basic knowledge of the automation technology and programmable logic controllers is prerequisite for participation.
EUR-ACE ENGINEERING PRACTICE
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
EUR-ACE COMMUNICATION AND TEAM-WORKING
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Content
User interface design and usability
Human machine interfaces
Operating panels
Supervisory Control and Data Acquisition systems
Evaluation scale
0-5
Evaluation criteria, pass/failed
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Prerequisites
Basic knowledge related to the automation technology
Basic knowledge related to programmable logic controllers including hardware and software
Enrollment
01.11.2024 - 09.01.2025
Timing
13.01.2025 - 18.05.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- English
Seats
20 - 35
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Groups
-
TAR23S1Bachelor's Degree Programme in Automation and Robotics
Objectives
You become familiar with the user interface design for programmable logic controllers in theory and in practice. You are able to implement a human machine interface utilizing operating panel or supervisory control and data acquisition system. Basic knowledge of the automation technology and programmable logic controllers is prerequisite for participation.
EUR-ACE ENGINEERING PRACTICE
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
EUR-ACE COMMUNICATION AND TEAM-WORKING
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Content
User interface design and usability
Human machine interfaces
Operating panels
Supervisory Control and Data Acquisition systems
Evaluation scale
0-5
Evaluation criteria, pass/failed
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Prerequisites
Basic knowledge related to the automation technology
Basic knowledge related to programmable logic controllers including hardware and software
Enrollment
01.08.2024 - 22.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
5 op
Virtual portion
4.5 op
Mode of delivery
10 % Face-to-face, 90 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Teppo Flyktman
Groups
-
TSA23KMAInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
Objectives
You become familiar with the user interface design for programmable logic controllers in theory and in practice. You are able to implement a human machine interface utilizing operating panel or supervisory control and data acquisition system. Basic knowledge of the automation technology and programmable logic controllers is prerequisite for participation.
EUR-ACE ENGINEERING PRACTICE
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
EUR-ACE COMMUNICATION AND TEAM-WORKING
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Content
User interface design and usability
Human machine interfaces
Operating panels
Supervisory Control and Data Acquisition systems
Time and location
Paikka:
Luennot ja muu etäopetus: teams
Kontaktipäivinä tapahtuva opetus sekä harjoitustöiden testaus ja esittely: JAMK pääkampus
Learning materials and recommended literature
Oppimateriaali esitellään kurssin aikana
Teaching methods
Luennot ja harjoitustehtävät. Kurssilla tehdään useita harjoitustehtäviä liittyen operointipaneelien ohjelmointiin sekä SCADA-ympäristön ohjelmointiin. Kurssin ohjelmistot ovat käytettävissä etäyhteydellä, mutta osa tehtävistä tulee testata ja esitellä automaatiolaboratoriossa oikeilla laitteilla.
Kyseessä on monimuoto-opiskelijoille tarkoitettu toteutus ja opetuskieli on suomi, mutta opetusmateriaalit voivat olla myös englanninkielisiä.
Alternative completion methods
Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opntojakson erityiskäytänteistä.
Student workload
135 h sisältäen luennot, ohjatut harjoitukset sekä itsenäisen työskentelyn.
Further information for students
Arviointi perustuu palautettuihin oppimistehtäviin sekä niiden suulliseen ja kirjalliseen raportointiin.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Prerequisites
Basic knowledge related to the automation technology
Basic knowledge related to programmable logic controllers including hardware and software
Enrollment
20.11.2023 - 04.01.2024
Timing
08.01.2024 - 30.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Teppo Flyktman
Groups
-
TAR22S1Bachelor's Degree Programme in Automation and Robotics
Objectives
You become familiar with the user interface design for programmable logic controllers in theory and in practice. You are able to implement a human machine interface utilizing operating panel or supervisory control and data acquisition system. Basic knowledge of the automation technology and programmable logic controllers is prerequisite for participation.
EUR-ACE ENGINEERING PRACTICE
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
EUR-ACE COMMUNICATION AND TEAM-WORKING
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Content
User interface design and usability
Human machine interfaces
Operating panels
Supervisory Control and Data Acquisition systems
Time and location
Main campus / Spring 2024
Learning materials and recommended literature
Materials in e-learning environment
Teaching methods
Lectures and assignments including various learning tasks.
Independent work and study in a small-scale laboratoryproject(s).
Alternative completion methods
Accreditation procedures are described in the Degree Regulations and Study Guide. Further information about possible course-specific arrangements is available from Course tutor.
Student workload
135 h including lectures, assignments and individual work
Further information for students
No final exam is arranged in this course. Assessment is based on assignments, learning tasks and interviews.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Prerequisites
Basic knowledge related to the automation technology
Basic knowledge related to programmable logic controllers including hardware and software
Enrollment
20.11.2023 - 04.01.2024
Timing
01.01.2024 - 19.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Teaching languages
- English
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Teppo Flyktman
Groups
-
TSA22SASähkö- ja automaatiotekniikka (AMK)
Objectives
You become familiar with the user interface design for programmable logic controllers in theory and in practice. You are able to implement a human machine interface utilizing operating panel or supervisory control and data acquisition system. Basic knowledge of the automation technology and programmable logic controllers is prerequisite for participation.
EUR-ACE ENGINEERING PRACTICE
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
EUR-ACE COMMUNICATION AND TEAM-WORKING
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Content
User interface design and usability
Human machine interfaces
Operating panels
Supervisory Control and Data Acquisition systems
Time and location
Pääkampus / kevätlukukausi 2024
Learning materials and recommended literature
Materiaali jaetaan Moodlessa.
Teaching methods
Luennot ja oppimistehtävät.
Alternative completion methods
Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opintojakson erityiskäytänteistä.
Student workload
135 tuntia sisältäen tuntityöskentelyä ja itsenäistä työtä.
Further information for students
Kurssin arviointi perustuu suoritettuihin harjoitustöihin.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Prerequisites
Basic knowledge related to the automation technology
Basic knowledge related to programmable logic controllers including hardware and software
Enrollment
01.08.2023 - 24.08.2023
Timing
01.08.2023 - 19.12.2023
Number of ECTS credits allocated
5 op
Virtual portion
2 op
Mode of delivery
60 % Face-to-face, 40 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Teppo Flyktman
Groups
-
TSA22KMASähkö- ja automaatiotekniikka (AMK)
Objectives
You become familiar with the user interface design for programmable logic controllers in theory and in practice. You are able to implement a human machine interface utilizing operating panel or supervisory control and data acquisition system. Basic knowledge of the automation technology and programmable logic controllers is prerequisite for participation.
EUR-ACE ENGINEERING PRACTICE
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
EUR-ACE COMMUNICATION AND TEAM-WORKING
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Content
User interface design and usability
Human machine interfaces
Operating panels
Supervisory Control and Data Acquisition systems
Time and location
Aika: Syksy 2023
Paikka:
Luennot ja muu etäopetus: teams
Kontaktipäivinä tapahtuva opetus sekä harjoitustöiden testaus ja esittely: JAMK pääkampus
Learning materials and recommended literature
Oppimateriaali esitellään kurssin aikana
Teaching methods
Luennot ja harjoitustehtävät. Kurssilla tehdään useita harjoitustehtäviä liittyen operointipaneelien ohjelmointiin sekä SCADA-ympäristön ohjelmointiin. Kurssin ohjelmistot ovat käytettävissä etäyhteydellä, mutta osa tehtävistä tulee testata ja esitellä automaatiolaboratoriossa oikeilla laitteilla.
Kyseessä on monimuoto-opiskelijoille tarkoitettu toteutus ja opetuskieli on suomi, mutta opetusmateriaalit voivat olla myös englanninkielisiä.
Alternative completion methods
Hyväksilukemisen menettelytavat kuvataan tutkintosäännössä ja opinto-oppaassa. Opintojakson opettaja antaa lisätietoa mahdollisista opntojakson erityiskäytänteistä.
Student workload
135 h sisältäen luennot, ohjatut harjoitukset sekä itsenäisen työskentelyn.
Further information for students
Arviointi perustuu palautettuihin oppimistehtäviin sekä niiden suulliseen ja kirjalliseen raportointiin.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Prerequisites
Basic knowledge related to the automation technology
Basic knowledge related to programmable logic controllers including hardware and software
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 21.05.2023
Number of ECTS credits allocated
5 op
Virtual portion
1 op
Mode of delivery
80 % Face-to-face, 20 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Teppo Flyktman
Groups
-
TSA21SASähkö- ja automaatiotekniikka (AMK)
Objectives
You become familiar with the user interface design for programmable logic controllers in theory and in practice. You are able to implement a human machine interface utilizing operating panel or supervisory control and data acquisition system. Basic knowledge of the automation technology and programmable logic controllers is prerequisite for participation.
EUR-ACE ENGINEERING PRACTICE
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
EUR-ACE COMMUNICATION AND TEAM-WORKING
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Content
User interface design and usability
Human machine interfaces
Operating panels
Supervisory Control and Data Acquisition systems
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Prerequisites
Basic knowledge related to the automation technology
Basic knowledge related to programmable logic controllers including hardware and software
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 31.12.2022
Number of ECTS credits allocated
5 op
Virtual portion
3 op
Mode of delivery
40 % Face-to-face, 60 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Teppo Flyktman
Groups
-
TSA21KMASähkö- ja automaatiotekniikka (AMK)
Objectives
You become familiar with the user interface design for programmable logic controllers in theory and in practice. You are able to implement a human machine interface utilizing operating panel or supervisory control and data acquisition system. Basic knowledge of the automation technology and programmable logic controllers is prerequisite for participation.
EUR-ACE ENGINEERING PRACTICE
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
EUR-ACE COMMUNICATION AND TEAM-WORKING
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Content
User interface design and usability
Human machine interfaces
Operating panels
Supervisory Control and Data Acquisition systems
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Prerequisites
Basic knowledge related to the automation technology
Basic knowledge related to programmable logic controllers including hardware and software
Enrollment
01.11.2021 - 09.01.2022
Timing
01.01.2022 - 15.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Seats
0 - 28
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Teppo Flyktman
Groups
-
TSA20SABachelor's Degree Programme in Electrical and Automation Engineering
Objectives
You become familiar with the user interface design for programmable logic controllers in theory and in practice. You are able to implement a human machine interface utilizing operating panel or supervisory control and data acquisition system. Basic knowledge of the automation technology and programmable logic controllers is prerequisite for participation.
EUR-ACE ENGINEERING PRACTICE
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
EUR-ACE COMMUNICATION AND TEAM-WORKING
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Content
User interface design and usability
Human machine interfaces
Operating panels
Supervisory Control and Data Acquisition systems
Time and location
Spring 2022
Learning materials and recommended literature
Materials in e-learning environment
Teaching methods
Lectures and assignments including various learning tasks.
Independent work and study in a small-scale laboratory project(s).
Exam dates and retake possibilities
No final exam is arranged in this course. Assessment is based on assignments, learning tasks and interviews.
Alternative completion methods
Accreditation procedures are described in the Degree Regulations and Study Guide. Further information about possible course-specific arrangements is available from Course tutor.
Student workload
135h
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
You master the common practices of the user interface design and are able to implement human machine interfaces for industrial automation systems. You know the most common connection methods between user interfaces and programmable logic controllers and are able to diagnose and solve typical problems.
You are able to communicate efficiently about ideas, problems and solutions as a member of an international engineering team. You are able to co-operate with experts from other fields of technology to achieve a mutual objective.
Prerequisites
Basic knowledge related to the automation technology
Basic knowledge related to programmable logic controllers including hardware and software