Basics of CADLaajuus (2 cr)
Code: TSAA0500
Credits
2 op
Teaching language
- Finnish
Responsible person
- Veli-Matti Häkkinen
- Vesa Hytönen
Objective
You will learn how to create simple documents using CAD software and you will understand technical documentation practices. The skills learned in this course will be needed later in other professional courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will become familiar working in a CAD environment and you understand good and effective practices of drafting technical documents.
EUR-ACE ENGINEERING PRACTICE
You can use engineering software to produce technical documents effectively.
Content
Basics of CAD drawing
Basics of CAD editing
Technical documentation practices e.g. revisioning
Layers and reference drawings
Plotting and layouts
CAD blocks
CAD programming
Qualifications
-
Assessment criteria, approved/failed
To pass this course you must demonstrate that you master the basic CAD drawing skills at a level required by your studies and working life. You have basic knowledge of CAD drawing and editing. You can take advantage of different layers and layout structures. You are able to create and edit blocks with attribute texts.
Enrollment
20.11.2023 - 10.01.2024
Timing
08.01.2024 - 19.05.2024
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Veli-Matti Häkkinen
- Vesa Hytönen
Groups
-
TSA24KMInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
Objectives
You will learn how to create simple documents using CAD software and you will understand technical documentation practices. The skills learned in this course will be needed later in other professional courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will become familiar working in a CAD environment and you understand good and effective practices of drafting technical documents.
EUR-ACE ENGINEERING PRACTICE
You can use engineering software to produce technical documents effectively.
Content
Basics of CAD drawing
Basics of CAD editing
Technical documentation practices e.g. revisioning
Layers and reference drawings
Plotting and layouts
CAD blocks
CAD programming
Learning materials and recommended literature
Shrock, Cheryl R.; Heather, Steve, 2019. Beginning AutoCAD® 2020 - Exercise Workbook. E-book. Industrial Press. Referred 11th September.2023.
https://app.knovel.com/web/toc.v/cid:kpBACADE11/viewerType:toc//root_slug:viewerType%3Atoc/url_slug:root_slug%3Abeginning-autocad-2020?kpromoter=federation
Teaching methods
The author has to solve different kinds of problems related to production of the CAD documents. You constantly have to make decisions about the details of the work. Therefore, problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons.
Exam dates and retake possibilities
Examination (spring 2024)
Resit 1 (spring 2024)
Resit 2 (spring 2024)
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you must demonstrate that you master the basic CAD drawing skills at a level required by your studies and working life. You have basic knowledge of CAD drawing and editing. You can take advantage of different layers and layout structures. You are able to create and edit blocks with attribute texts.
Prerequisites
-
Enrollment
01.08.2023 - 24.08.2023
Timing
01.08.2023 - 19.12.2023
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA23SR1Sähkö- ja automaatiotekniikka (AMK)
-
TSA23SR2Sähkö- ja automaatiotekniikka (AMK)
Objectives
You will learn how to create simple documents using CAD software and you will understand technical documentation practices. The skills learned in this course will be needed later in other professional courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will become familiar working in a CAD environment and you understand good and effective practices of drafting technical documents.
EUR-ACE ENGINEERING PRACTICE
You can use engineering software to produce technical documents effectively.
Content
Basics of CAD drawing
Basics of CAD editing
Technical documentation practices e.g. revisioning
Layers and reference drawings
Plotting and layouts
CAD blocks
CAD programming
Learning materials and recommended literature
Shrock, Cheryl R.; Heather, Steve, 2019. Beginning AutoCAD® 2020 - Exercise Workbook. E-book. Industrial Press. Referred 28.04.2021.
https://app.knovel.com/web/toc.v/cid:kpBACADE11/viewerType:toc//root_slug:viewerType%3Atoc/url_slug:root_slug%3Abeginning-autocad-2020?kpromoter=federation
Teaching methods
The author has to solve different kinds of problems related to production of the CAD documents. You constantly have to make decisions about the details of the work. Therefore, problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons.
Exam dates and retake possibilities
Examination (autumn 2023)
Resit 1 (autumn 2023)
Resit 2 (autumn 2023)
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you must demonstrate that you master the basic CAD drawing skills at a level required by your studies and working life. You have basic knowledge of CAD drawing and editing. You can take advantage of different layers and layout structures. You are able to create and edit blocks with attribute texts.
Prerequisites
-
Enrollment
01.08.2023 - 24.08.2023
Timing
01.08.2023 - 31.12.2023
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Veli-Matti Häkkinen
- Vesa Hytönen
Groups
-
TAR23S1Bachelor's Degree Programme in Automation and Robotics
Objectives
You will learn how to create simple documents using CAD software and you will understand technical documentation practices. The skills learned in this course will be needed later in other professional courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will become familiar working in a CAD environment and you understand good and effective practices of drafting technical documents.
EUR-ACE ENGINEERING PRACTICE
You can use engineering software to produce technical documents effectively.
Content
Basics of CAD drawing
Basics of CAD editing
Technical documentation practices e.g. revisioning
Layers and reference drawings
Plotting and layouts
CAD blocks
CAD programming
Learning materials and recommended literature
Shrock, Cheryl R.; Heather, Steve, 2019. Beginning AutoCAD® 2020 - Exercise Workbook. E-book. Industrial Press. Referred 28.04.2021.
https://app.knovel.com/web/toc.v/cid:kpBACADE11/viewerType:toc//root_slug:viewerType%3Atoc/url_slug:root_slug%3Abeginning-autocad-2020?kpromoter=federation
Teaching methods
The author has to solve different kinds of problems related to production of the CAD documents. You constantly have to make decisions about the details of the work. Therefore, problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons.
Exam dates and retake possibilities
Examination (autumn 2023 - on campus)
Resit 1 (autumn 2023 - on campus)
Resit 2 (autumn 2023 - on campus)
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you must demonstrate that you master the basic CAD drawing skills at a level required by your studies and working life. You have basic knowledge of CAD drawing and editing. You can take advantage of different layers and layout structures. You are able to create and edit blocks with attribute texts.
Prerequisites
-
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 21.05.2023
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Veli-Matti Häkkinen
- Vesa Hytönen
Groups
-
TSA23KMInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
-
ZJATSA23KMAvoin amk, AMK-polut, Sähkö-ja automaatiotekniikka, Monimuoto
Objectives
You will learn how to create simple documents using CAD software and you will understand technical documentation practices. The skills learned in this course will be needed later in other professional courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will become familiar working in a CAD environment and you understand good and effective practices of drafting technical documents.
EUR-ACE ENGINEERING PRACTICE
You can use engineering software to produce technical documents effectively.
Content
Basics of CAD drawing
Basics of CAD editing
Technical documentation practices e.g. revisioning
Layers and reference drawings
Plotting and layouts
CAD blocks
CAD programming
Learning materials and recommended literature
Shrock, Cheryl R.; Heather, Steve, 2019. Beginning AutoCAD® 2020 - Exercise Workbook. E-book. Industrial Press. Referred 28.04.2021.
https://app.knovel.com/web/toc.v/cid:kpBACADE11/viewerType:toc//root_slug:viewerType%3Atoc/url_slug:root_slug%3Abeginning-autocad-2020?kpromoter=federation
Teaching methods
The author has to solve different kinds of problems related to production of the CAD documents. You constantly have to make decisions about the details of the work. Therefore, problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons.
Exam dates and retake possibilities
Examination (spring 2023)
Resit 1 (spring 2023)
Resit 2 (spring 2023)
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you must demonstrate that you master the basic CAD drawing skills at a level required by your studies and working life. You have basic knowledge of CAD drawing and editing. You can take advantage of different layers and layout structures. You are able to create and edit blocks with attribute texts.
Prerequisites
-
Timing
22.08.2022 - 31.12.2022
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Teacher in charge
Vesa Hytönen
Groups
-
TAR22S1Bachelor's Degree Programme in Automation and Robotics
Objectives
You will learn how to create simple documents using CAD software and you will understand technical documentation practices. The skills learned in this course will be needed later in other professional courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will become familiar working in a CAD environment and you understand good and effective practices of drafting technical documents.
EUR-ACE ENGINEERING PRACTICE
You can use engineering software to produce technical documents effectively.
Content
Basics of CAD drawing
Basics of CAD editing
Technical documentation practices e.g. revisioning
Layers and reference drawings
Plotting and layouts
CAD blocks
CAD programming
Learning materials and recommended literature
Shrock, Cheryl R.; Heather, Steve, 2019. Beginning AutoCAD® 2020 - Exercise Workbook. E-book. Industrial Press. Referred 28.04.2021.
https://app.knovel.com/web/toc.v/cid:kpBACADE11/viewerType:toc//root_slug:viewerType%3Atoc/url_slug:root_slug%3Abeginning-autocad-2020?kpromoter=federation
Teaching methods
The author has to solve different kinds of problems related to production of the CAD documents. You constantly have to make decisions about the details of the work. Therefore, problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons.
Exam dates and retake possibilities
Examination (autumn 2022)
Resit 1 (autumn 2022)
Resit 2 (autumn 2022)
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you must demonstrate that you master the basic CAD drawing skills at a level required by your studies and working life. You have basic knowledge of CAD drawing and editing. You can take advantage of different layers and layout structures. You are able to create and edit blocks with attribute texts.
Prerequisites
-
Enrollment
01.08.2022 - 25.08.2022
Timing
22.08.2022 - 31.12.2022
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
20 - 50
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
ZJATSA22S1Avoin amk, Sähkö- ja automaatiotekniikka, Päivä
-
TSA22SR1Sähkö- ja automaatiotekniikka (AMK)
-
TSA22SR2Sähkö- ja automaatiotekniikka (AMK)
Objectives
You will learn how to create simple documents using CAD software and you will understand technical documentation practices. The skills learned in this course will be needed later in other professional courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will become familiar working in a CAD environment and you understand good and effective practices of drafting technical documents.
EUR-ACE ENGINEERING PRACTICE
You can use engineering software to produce technical documents effectively.
Content
Basics of CAD drawing
Basics of CAD editing
Technical documentation practices e.g. revisioning
Layers and reference drawings
Plotting and layouts
CAD blocks
CAD programming
Learning materials and recommended literature
Shrock, Cheryl R.; Heather, Steve, 2019. Beginning AutoCAD® 2020 - Exercise Workbook. E-book. Industrial Press. Referred 28.04.2021.
https://app.knovel.com/web/toc.v/cid:kpBACADE11/viewerType:toc//root_slug:viewerType%3Atoc/url_slug:root_slug%3Abeginning-autocad-2020?kpromoter=federation
Teaching methods
The author has to solve different kinds of problems related to production of the CAD documents. You constantly have to make decisions about the details of the work. Therefore, problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of learning tasks is guided by video instructions and during the contact lessons.
Exam dates and retake possibilities
Examination (autumn 2022)
Resit 1 (autumn 2022)
Resit 2 (autumn 2022)
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you must demonstrate that you master the basic CAD drawing skills at a level required by your studies and working life. You have basic knowledge of CAD drawing and editing. You can take advantage of different layers and layout structures. You are able to create and edit blocks with attribute texts.
Prerequisites
-
Enrollment
01.11.2021 - 09.01.2022
Timing
01.01.2022 - 15.05.2022
Number of ECTS credits allocated
2 op
Virtual portion
2 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
20 - 60
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Veli-Matti Häkkinen
- Vesa Hytönen
Groups
-
TSA22KMInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
Objectives
You will learn how to create simple documents using CAD software and you will understand technical documentation practices. The skills learned in this course will be needed later in other professional courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will become familiar working in a CAD environment and you understand good and effective practices of drafting technical documents.
EUR-ACE ENGINEERING PRACTICE
You can use engineering software to produce technical documents effectively.
Content
Basics of CAD drawing
Basics of CAD editing
Technical documentation practices e.g. revisioning
Layers and reference drawings
Plotting and layouts
CAD blocks
CAD programming
Learning materials and recommended literature
Shrock, Cheryl R.; Heather, Steve, 2019. Beginning AutoCAD® 2020 - Exercise Workbook. E-book. Industrial Press. Referred 28.04.2021.
https://app.knovel.com/web/toc.v/cid:kpBACADE11/viewerType:toc//root_slug:viewerType%3Atoc/url_slug:root_slug%3Abeginning-autocad-2020?kpromoter=federation
Teaching methods
The author has to solve many different levels of problems related to image production in CAD work. You constantly have to make decisions about the details of the work. Therefore, problem-based learning is used as a learning method. Learning takes place through independently performed and returned learning tasks. The completion of learning tasks is guided by video instructions and contact hours.
Exam dates and retake possibilities
Examination (spring 2022)
Resit 1 (spring 2022)
Resit 2 (spring 2022)
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you must demonstrate that you master the basic CAD drawing skills at a level required by your studies and working life. You have basic knowledge of CAD drawing and editing. You can take advantage of different layers and layout structures. You are able to create and edit blocks with attribute texts.
Prerequisites
-