Basics of Control SystemsLaajuus (2 cr)
Code: TSAA0540
Credits
2 op
Teaching language
- Finnish
Responsible person
- Ari Kuisma
Objective
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Qualifications
-
Assessment criteria, satisfactory (1)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Assessment criteria, good (3)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Assessment criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Enrollment
01.11.2024 - 09.01.2025
Timing
13.01.2025 - 23.02.2025
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- Finnish
Seats
20 - 35
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA23SAInsinööri (AMK), sähkö- ja automaatiotekniikka, päivätoteutus
Objectives
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Evaluation criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Prerequisites
-
Enrollment
01.11.2024 - 09.01.2025
Timing
13.01.2025 - 09.03.2025
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- English
Seats
20 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TAR23S1Bachelor's Degree Programme in Automation and Robotics
Objectives
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Evaluation criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Prerequisites
-
Enrollment
01.11.2024 - 09.01.2025
Timing
13.01.2025 - 09.03.2025
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- Finnish
Seats
20 - 60
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA23SSInsinööri (AMK), sähkö- ja automaatiotekniikka, päivätoteutus
Objectives
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Evaluation criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Prerequisites
-
Enrollment
01.08.2024 - 22.08.2024
Timing
01.08.2024 - 20.10.2024
Number of ECTS credits allocated
2 op
Virtual portion
1.5 op
Mode of delivery
25 % Face-to-face, 75 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA23KMSInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
-
TSA23KMAInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
Objectives
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Evaluation criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Prerequisites
-
Enrollment
20.11.2023 - 04.01.2024
Timing
01.01.2024 - 17.03.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TAR22S1Bachelor's Degree Programme in Automation and Robotics
Objectives
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Evaluation criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Prerequisites
-
Enrollment
20.11.2023 - 04.01.2024
Timing
01.01.2024 - 19.05.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
- Veli-Matti Häkkinen
Groups
-
TSA22SSSähkö- ja automaatiotekniikka (AMK)
-
TSA22SASähkö- ja automaatiotekniikka (AMK)
Objectives
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Evaluation criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Prerequisites
-
Enrollment
01.08.2023 - 24.08.2023
Timing
28.08.2023 - 15.10.2023
Number of ECTS credits allocated
2 op
Virtual portion
2 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 35
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
- Veli-Matti Häkkinen
Teacher in charge
Ari Kuisma
Groups
-
TSA22KMASähkö- ja automaatiotekniikka (AMK)
-
TSA22KMSSähkö- ja automaatiotekniikka (AMK)
Objectives
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Evaluation criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Prerequisites
-
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 05.03.2023
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA21SASähkö- ja automaatiotekniikka (AMK)
-
TSA21SBSähkö- ja automaatiotekniikka (AMK)
Objectives
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Evaluation criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Prerequisites
-
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 23.10.2022
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA21KMBSähkö- ja automaatiotekniikka (AMK)
-
TSA21KMASähkö- ja automaatiotekniikka (AMK)
Objectives
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Evaluation criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Prerequisites
-
Enrollment
01.11.2021 - 09.01.2022
Timing
01.01.2022 - 27.02.2022
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Kuisma
Groups
-
TSA20SABachelor's Degree Programme in Electrical and Automation Engineering
-
TSA20SBBachelor's Degree Programme in Electrical and Automation Engineering
-
TSA20S1Bachelor's Degree Programme in Electrical and Automation Engineering
Objectives
You will get to know the key topic in the field, ie control technology. With the help of the control technology, the equipment is made to react as correctly as possible, e.g. various process disturbances or changes in driving situations. This course allows for a more in-depth study of the subject in other courses.
EUR-ACE KNOWLEDGE AND UNDERSTANDING
You will recognize the different structures of control systems and understand the challenges associated with tuning control circuits and know the methods for tuning them.
EUR-ACE ENGINEERING PRACTICE
You can define the parameters needed to tune the control circuits and you can tune a simple control circuit.
Content
structures and properties of simple control circuits
MATLAB / SIMULINK modeling and simulation software for dynamic system modeling
control methods
measuring and optimizing control performance
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Sufficient (1): You recognize the basics and terminology, but interpreting them is challenging.
Satisfactory (2): You know the basics and terminology, but applying the key things is challenging.
Evaluation criteria, good (3-4)
Good 3: You understand the basics of modeling dynamic systems and know how to design a PID controller for a dynamic system. You can also test and tune it.
Very good (4): You master the key issues and their application so deeply that you also know how to locate the more complex causes of inaction.
Evaluation criteria, excellent (5)
Excellent (5): You master key issues and are able to show creativity and innovation in their application.
Prerequisites
-