Skip to main content

StaticsLaajuus (4 cr)

Code: TKKP0400

Credits

4 op

Teaching language

  • Finnish

Responsible person

  • Petri Luosma

Objective

The basic knowledge of the strength of materials is essential to constructions engineering. The strength can only be determined by stress. To determine the stress you have to be able to calculate the stresses from loads and for that you need statics. You gain the basics knowledge of statics and you can do static sizing of simple structures with the help of manuals and sizing table cases. You can form a mechanical model from a structure under inspection and you can solve the forces and stresses, affecting it. You can perceive cases which require more precise and profound static inspection. You start the studies from the basic concept and proceed to apply them to more challenging calculations of statics.

Knowledge and Understanding:
You understand the principles of statics and how they are based to the mathematics and physics.

Engineering Practice:
You can apply the principles of statics to solve practical engineering problems by using the standardized calculation methods.

Multidisciplinary competences:
You understand the effect of the statics to the calculations of structures and its effect to environmental and economic issues. You can also gather and interpret relevant information for the calculation of statics.

Content

Balance of particles and rigid bodies. Grids, beam structures and link mechanisms. Stresses.

Qualifications

Handling powers and roots, reducing expressions, application of right and oblique triangle trigonometry, vector calculation, solving first and second degree polynomial equations and radical, exponential and logarithmic equations and pairs and sets of equations. SI unit system, transformation of units, magnitude calculation, constant velocity motion, motion with constant acceleration, vertical trajectory, oblique trajectory, Newton’s laws, friction and the elements of statics.

Assessment criteria, satisfactory (1)

To gaine the grade 0-5 you have to take part to the exam. In the course there is exam and two resits.

Adequate (1): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models your skills are clearly inadequate. You can solve simple basic problems in an adequate manner.

Satisfactory (2): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models from real structures your skills are inadequate. You can satisfactorily solve simple basic problems.

Assessment criteria, good (3)

Good (3): You are familiar with the knowledge of statics and calculating forces and stresses in simple structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Very good (4): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection

Assessment criteria, excellent (5)

Excellent (5): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired in an innovative manner to more challenging structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Assessment criteria, approved/failed

Approved: You must calculate at least 75% of homework and you must get answers which are relatively correct from each week. You must get correct answer for at least 50% of the homework from each week.

Further information

Studies are also offered to students outside of the study programs by Open University of Applied Sciences JAMK as well as through CampusOnline to the students of other Universities of Applied Sciences and Universities.

Enrollment

01.08.2024 - 22.08.2024

Timing

26.08.2024 - 18.12.2024

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • English
  • Finnish
Seats

20 - 40

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Petri Luosma
Groups
  • TKN23SB
    Konetekniikka (AMK)
  • TKN24VSDD
    Konetekniikka (AMK), DD
  • TKN24VS
    Konetekniikka (AMK), vaihto-opiskelu/Exchange studies
  • TKN23SA
    Konetekniikka (AMK)

Objectives

The basic knowledge of the strength of materials is essential to constructions engineering. The strength can only be determined by stress. To determine the stress you have to be able to calculate the stresses from loads and for that you need statics. You gain the basics knowledge of statics and you can do static sizing of simple structures with the help of manuals and sizing table cases. You can form a mechanical model from a structure under inspection and you can solve the forces and stresses, affecting it. You can perceive cases which require more precise and profound static inspection. You start the studies from the basic concept and proceed to apply them to more challenging calculations of statics.

Knowledge and Understanding:
You understand the principles of statics and how they are based to the mathematics and physics.

Engineering Practice:
You can apply the principles of statics to solve practical engineering problems by using the standardized calculation methods.

Multidisciplinary competences:
You understand the effect of the statics to the calculations of structures and its effect to environmental and economic issues. You can also gather and interpret relevant information for the calculation of statics.

Content

Balance of particles and rigid bodies. Grids, beam structures and link mechanisms. Stresses.

Learning materials and recommended literature

Hand outs.
Valtanen, E. 2019. Tekniikan taulukkokirja. Jyväskylä: Genesis-Kirjat Oy.

Teaching methods

Recorded lectures and calculation examples. Assignments are based by problem-based learning. As help when you do your assignments you can use recorded lectures, examples, discussion list and files in your studying environment. You can do assignments individually or in groups, but you must always return the assignments individually. In distance learning you can join the webinars to get help in the assignments. In contact method you can get help for the assignments in the workshops.

You must be present at the first lecture (either remotely or face-to-face), and the first assignments must be submitted on time. If the above is not realized, the student will be removed from the course.In the middle of the course, you give anonymous feedback.

Exam dates and retake possibilities

exam week 49 and two resits
In full time studies, exams and retakes in JAMK's premises. In part time studies as a supervised video exam.

Student workload

Recorded lectures and examples 20 h, learning assignments 18 h either online or by distance learning in study environment and independent learning work 70 h. Total 108 h learning work.

Further information for students

Open AMK 20

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

To gaine the grade 0-5 you have to take part to the exam. In the course there is exam and two resits.

Adequate (1): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models your skills are clearly inadequate. You can solve simple basic problems in an adequate manner.

Satisfactory (2): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models from real structures your skills are inadequate. You can satisfactorily solve simple basic problems.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the knowledge of statics and calculating forces and stresses in simple structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Very good (4): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection

Evaluation criteria, excellent (5)

Excellent (5): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired in an innovative manner to more challenging structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Evaluation criteria, pass/failed

Approved: You must calculate at least 75% of homework and you must get answers which are relatively correct from each week. You must get correct answer for at least 50% of the homework from each week.

Prerequisites

Handling powers and roots, reducing expressions, application of right and oblique triangle trigonometry, vector calculation, solving first and second degree polynomial equations and radical, exponential and logarithmic equations and pairs and sets of equations. SI unit system, transformation of units, magnitude calculation, constant velocity motion, motion with constant acceleration, vertical trajectory, oblique trajectory, Newton’s laws, friction and the elements of statics.

Further information

Studies are also offered to students outside of the study programs by Open University of Applied Sciences JAMK as well as through CampusOnline to the students of other Universities of Applied Sciences and Universities.

Enrollment

01.08.2024 - 22.08.2024

Timing

26.08.2024 - 18.12.2024

Number of ECTS credits allocated

4 op

Virtual portion

2 op

Mode of delivery

50 % Face-to-face, 50 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

20 - 32

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Petri Luosma
Groups
  • TKN23SM
    Konetekniikka (AMK)

Objectives

The basic knowledge of the strength of materials is essential to constructions engineering. The strength can only be determined by stress. To determine the stress you have to be able to calculate the stresses from loads and for that you need statics. You gain the basics knowledge of statics and you can do static sizing of simple structures with the help of manuals and sizing table cases. You can form a mechanical model from a structure under inspection and you can solve the forces and stresses, affecting it. You can perceive cases which require more precise and profound static inspection. You start the studies from the basic concept and proceed to apply them to more challenging calculations of statics.

Knowledge and Understanding:
You understand the principles of statics and how they are based to the mathematics and physics.

Engineering Practice:
You can apply the principles of statics to solve practical engineering problems by using the standardized calculation methods.

Multidisciplinary competences:
You understand the effect of the statics to the calculations of structures and its effect to environmental and economic issues. You can also gather and interpret relevant information for the calculation of statics.

Content

Balance of particles and rigid bodies. Grids, beam structures and link mechanisms. Stresses.

Learning materials and recommended literature

Hand outs.
Valtanen, E. 2019. Tekniikan taulukkokirja. Jyväskylä: Genesis-Kirjat Oy.

Teaching methods

Recorded lectures and calculation examples. Assignments are based by problem-based learning. As help when you do your assignments you can use recorded lectures, examples, discussion list and files in your studying environment. You can do assignments individually or in groups, but you must always return the assignments individually. In distance learning you can join the webinars to get help in the assignments. In contact method you can get help for the assignments in the workshops.

You must be present at the first lecture (either remotely or face-to-face), and the first assignments must be submitted on time. If the above is not realized, the student will be removed from the course. In the middle of the course, you give anonymous feedback.

Exam dates and retake possibilities

exam week 49 and two resits
In full time studies, exams and retakes in JAMK's premises. In part time studies as a supervised video exam.

Student workload

Recorded lectures and examples 20 h, learning assignments 18 h either online or by distance learning in study environment and independent learning work 70 h. Total 108 h learning work.

Further information for students

Open AMK 20

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

To gaine the grade 0-5 you have to take part to the exam. In the course there is exam and two resits.

Adequate (1): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models your skills are clearly inadequate. You can solve simple basic problems in an adequate manner.

Satisfactory (2): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models from real structures your skills are inadequate. You can satisfactorily solve simple basic problems.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the knowledge of statics and calculating forces and stresses in simple structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Very good (4): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection

Evaluation criteria, excellent (5)

Excellent (5): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired in an innovative manner to more challenging structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Evaluation criteria, pass/failed

Approved: You must calculate at least 75% of homework and you must get answers which are relatively correct from each week. You must get correct answer for at least 50% of the homework from each week.

Prerequisites

Handling powers and roots, reducing expressions, application of right and oblique triangle trigonometry, vector calculation, solving first and second degree polynomial equations and radical, exponential and logarithmic equations and pairs and sets of equations. SI unit system, transformation of units, magnitude calculation, constant velocity motion, motion with constant acceleration, vertical trajectory, oblique trajectory, Newton’s laws, friction and the elements of statics.

Further information

Studies are also offered to students outside of the study programs by Open University of Applied Sciences JAMK as well as through CampusOnline to the students of other Universities of Applied Sciences and Universities.

Enrollment

01.08.2023 - 24.08.2023

Timing

28.08.2023 - 19.12.2023

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • English
  • Finnish
Seats

0 - 90

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Petri Luosma
Groups
  • TKN22SA
    Konetekniikka (AMK)
  • TKN22SB
    Konetekniikka (AMK)
  • TKN23VS
    Konetekniikka (AMK), vaihto-opiskelu/Exchange studies
  • TKN22SM
    Konetekniikka (AMK)

Objectives

The basic knowledge of the strength of materials is essential to constructions engineering. The strength can only be determined by stress. To determine the stress you have to be able to calculate the stresses from loads and for that you need statics. You gain the basics knowledge of statics and you can do static sizing of simple structures with the help of manuals and sizing table cases. You can form a mechanical model from a structure under inspection and you can solve the forces and stresses, affecting it. You can perceive cases which require more precise and profound static inspection. You start the studies from the basic concept and proceed to apply them to more challenging calculations of statics.

Knowledge and Understanding:
You understand the principles of statics and how they are based to the mathematics and physics.

Engineering Practice:
You can apply the principles of statics to solve practical engineering problems by using the standardized calculation methods.

Multidisciplinary competences:
You understand the effect of the statics to the calculations of structures and its effect to environmental and economic issues. You can also gather and interpret relevant information for the calculation of statics.

Content

Balance of particles and rigid bodies. Grids, beam structures and link mechanisms. Stresses.

Learning materials and recommended literature

Hand outs.
Valtanen, E. 2019. Tekniikan taulukkokirja. Jyväskylä: Genesis-Kirjat Oy.

Teaching methods

Recorded lectures and calculation examples. Assignments are based by problem-based learning. As help when you do your assignments you can use recorded lectures, examples, discussion list and files in your studying environment. You can do assignments individually or in groups, but you must always return the assignments individually. In distance learning you can join the webinars to get help in the assignments. In contact method you can get help for the assignments in the workshops. In the middle of the course, you give anonymous feedback.

Exam dates and retake possibilities

exam week 49 and two resits
In distance learning you have the exam in JAMK campus or exam studio or invigilated exam in network (using Zoom).

Student workload

Recorded lectures and examples 20 h, learning assignments 20 h either online or by distance learning in study environment and independent learning work 68 h. Total 108 h learning work.

Further information for students

Open AMK 20
Campusonline 20

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

To gaine the grade 0-5 you have to take part to the exam. In the course there is exam and two resits.

Adequate (1): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models your skills are clearly inadequate. You can solve simple basic problems in an adequate manner.

Satisfactory (2): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models from real structures your skills are inadequate. You can satisfactorily solve simple basic problems.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the knowledge of statics and calculating forces and stresses in simple structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Very good (4): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection

Evaluation criteria, excellent (5)

Excellent (5): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired in an innovative manner to more challenging structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Evaluation criteria, pass/failed

Approved: You must calculate at least 75% of homework and you must get answers which are relatively correct from each week. You must get correct answer for at least 50% of the homework from each week.

Prerequisites

Handling powers and roots, reducing expressions, application of right and oblique triangle trigonometry, vector calculation, solving first and second degree polynomial equations and radical, exponential and logarithmic equations and pairs and sets of equations. SI unit system, transformation of units, magnitude calculation, constant velocity motion, motion with constant acceleration, vertical trajectory, oblique trajectory, Newton’s laws, friction and the elements of statics.

Further information

Studies are also offered to students outside of the study programs by Open University of Applied Sciences JAMK as well as through CampusOnline to the students of other Universities of Applied Sciences and Universities.

Enrollment

01.11.2022 - 05.01.2023

Timing

01.01.2023 - 21.05.2023

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • English
  • Finnish
Seats

0 - 100

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Petri Luosma
Teacher in charge

Petri Luosma

Groups
  • ZJK22ST
    Korkeakoulujen välinen yhteistyö, TEKN
  • TKN21SA
    Konetekniikka (AMK)
  • TKN21SB
    Konetekniikka (AMK)
  • TKN22VK
    Konetekniikka (AMK), vaihto-opiskelu/Exchange studies
  • TKN21SM
    Konetekniikka

Objectives

The basic knowledge of the strength of materials is essential to constructions engineering. The strength can only be determined by stress. To determine the stress you have to be able to calculate the stresses from loads and for that you need statics. You gain the basics knowledge of statics and you can do static sizing of simple structures with the help of manuals and sizing table cases. You can form a mechanical model from a structure under inspection and you can solve the forces and stresses, affecting it. You can perceive cases which require more precise and profound static inspection. You start the studies from the basic concept and proceed to apply them to more challenging calculations of statics.

Knowledge and Understanding:
You understand the principles of statics and how they are based to the mathematics and physics.

Engineering Practice:
You can apply the principles of statics to solve practical engineering problems by using the standardized calculation methods.

Multidisciplinary competences:
You understand the effect of the statics to the calculations of structures and its effect to environmental and economic issues. You can also gather and interpret relevant information for the calculation of statics.

Content

Balance of particles and rigid bodies. Grids, beam structures and link mechanisms. Stresses.

Learning materials and recommended literature

Hand outs.
Valtanen, E. 2019. Tekniikan taulukkokirja. Jyväskylä: Genesis-Kirjat Oy.

Teaching methods

Recorded lectures and calculation examples. Assignments are based by problem-based learning. As help when you do your assignments you can use recorded lectures, examples, discussion list and files in your studying environment. You can do assignments individually or in groups, but you must always return the assignments individually. In distance learning you can join the webinars to get help in the assignments. In contact method you can get help for the assignments in the workshops. In the middle of the course, you give anonymous feedback.

Exam dates and retake possibilities

exam and two resits

Student workload

Recorded lectures and examples 20 h, learning assignments 20 h either online or by distance learning in study environment and independent learning work 68 h. Total 108 h learning work.

Further information for students

Open AMK 50
Campusonline 100

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

To gaine the grade 0-5 you have to take part to the exam. In the course there is exam and two resits.

Adequate (1): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models your skills are clearly inadequate. You can solve simple basic problems in an adequate manner.

Satisfactory (2): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models from real structures your skills are inadequate. You can satisfactorily solve simple basic problems.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the knowledge of statics and calculating forces and stresses in simple structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Very good (4): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection

Evaluation criteria, excellent (5)

Excellent (5): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired in an innovative manner to more challenging structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Evaluation criteria, pass/failed

Approved: You must calculate at least 75% of homework and you must get answers which are relatively correct from each week. You must get correct answer for at least 50% of the homework from each week.

Prerequisites

Handling powers and roots, reducing expressions, application of right and oblique triangle trigonometry, vector calculation, solving first and second degree polynomial equations and radical, exponential and logarithmic equations and pairs and sets of equations. SI unit system, transformation of units, magnitude calculation, constant velocity motion, motion with constant acceleration, vertical trajectory, oblique trajectory, Newton’s laws, friction and the elements of statics.

Further information

Studies are also offered to students outside of the study programs by Open University of Applied Sciences JAMK as well as through CampusOnline to the students of other Universities of Applied Sciences and Universities.

Enrollment

14.03.2022 - 15.05.2022

Timing

16.05.2022 - 30.09.2022

Number of ECTS credits allocated

4 op

Virtual portion

4 op

Mode of delivery

Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 30

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Petri Luosma
Teacher in charge

Petri Luosma

Groups
  • ZJK22KT
    Korkeakoulujen välinen yhteistyö, TEKN
  • TKN20S1
    Konetekniikka (AMK)
  • ZJA22KT
    Avoin AMK, tekniikka

Objectives

The basic knowledge of the strength of materials is essential to constructions engineering. The strength can only be determined by stress. To determine the stress you have to be able to calculate the stresses from loads and for that you need statics. You gain the basics knowledge of statics and you can do static sizing of simple structures with the help of manuals and sizing table cases. You can form a mechanical model from a structure under inspection and you can solve the forces and stresses, affecting it. You can perceive cases which require more precise and profound static inspection. You start the studies from the basic concept and proceed to apply them to more challenging calculations of statics.

Knowledge and Understanding:
You understand the principles of statics and how they are based to the mathematics and physics.

Engineering Practice:
You can apply the principles of statics to solve practical engineering problems by using the standardized calculation methods.

Multidisciplinary competences:
You understand the effect of the statics to the calculations of structures and its effect to environmental and economic issues. You can also gather and interpret relevant information for the calculation of statics.

Content

Balance of particles and rigid bodies. Grids, beam structures and link mechanisms. Stresses.

Learning materials and recommended literature

Hand outs.
Valtanen, E. 2019. Tekniikan taulukkokirja. Jyväskylä: Genesis-Kirjat Oy.

Teaching methods

- Recorded lectures and calculation examples. Assignments are based by problem-based learning. As help when you do your assignments you can use recorded lectures, examples, discussion list and files in your studying environment. You can do assignments individually or in groups, but you must always return the assignments individually. In distance learning you can join the webinars to get help in the assignments. In contact method you can get help for the assignments in the workshops.

Student workload

Recorded lectures and examples 20 h, learning assignments 20 h either online or by distance learning in study environment and independent learning work 68 h. Total 108 h learning work.

Further information for students

Open UAS 100 students
CampusOnline 100 students

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

To gaine the grade 0-5 you have to take part to the exam. In the course there is exam and two resits.

Adequate (1): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models your skills are clearly inadequate. You can solve simple basic problems in an adequate manner.

Satisfactory (2): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models from real structures your skills are inadequate. You can satisfactorily solve simple basic problems.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the knowledge of statics and calculating forces and stresses in simple structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Very good (4): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection

Evaluation criteria, excellent (5)

Excellent (5): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired in an innovative manner to more challenging structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Evaluation criteria, pass/failed

Approved: You must calculate at least 75% of homework and you must get answers which are relatively correct from each week. You must get correct answer for at least 50% of the homework from each week.

Prerequisites

Handling powers and roots, reducing expressions, application of right and oblique triangle trigonometry, vector calculation, solving first and second degree polynomial equations and radical, exponential and logarithmic equations and pairs and sets of equations. SI unit system, transformation of units, magnitude calculation, constant velocity motion, motion with constant acceleration, vertical trajectory, oblique trajectory, Newton’s laws, friction and the elements of statics.

Further information

Studies are also offered to students outside of the study programs by Open University of Applied Sciences JAMK as well as through CampusOnline to the students of other Universities of Applied Sciences and Universities.

Enrollment

01.11.2021 - 09.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

4 op

Virtual portion

4 op

Mode of delivery

Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 100

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Petri Luosma
Teacher in charge

Petri Luosma

Groups
  • ZJK22KT
    Korkeakoulujen välinen yhteistyö, TEKN
  • TKN20SB
    Konetekniikka (AMK)
  • TKN20SM
    Konetekniikka
  • TKN20SA
    Konetekniikka (AMK)
  • ZJA22KT
    Avoin AMK, tekniikka

Objectives

The basic knowledge of the strength of materials is essential to constructions engineering. The strength can only be determined by stress. To determine the stress you have to be able to calculate the stresses from loads and for that you need statics. You gain the basics knowledge of statics and you can do static sizing of simple structures with the help of manuals and sizing table cases. You can form a mechanical model from a structure under inspection and you can solve the forces and stresses, affecting it. You can perceive cases which require more precise and profound static inspection. You start the studies from the basic concept and proceed to apply them to more challenging calculations of statics.

Knowledge and Understanding:
You understand the principles of statics and how they are based to the mathematics and physics.

Engineering Practice:
You can apply the principles of statics to solve practical engineering problems by using the standardized calculation methods.

Multidisciplinary competences:
You understand the effect of the statics to the calculations of structures and its effect to environmental and economic issues. You can also gather and interpret relevant information for the calculation of statics.

Content

Balance of particles and rigid bodies. Grids, beam structures and link mechanisms. Stresses.

Learning materials and recommended literature

Hand outs.
Valtanen, E. 2019. Tekniikan taulukkokirja. Jyväskylä: Genesis-Kirjat Oy.

Teaching methods

Recorded lectures and calculation examples. Assignments are based by problem-based learning. As help when you do your assignments you can use recorded lectures, examples, discussion list and files in your studying environment. You can do assignments individually or in groups, but you must always return the assignments individually. In distance learning you can join the webinars to get help in the assignments. In contact method you can get help for the assignments in the workshops. In the middle of the course, you give anonymous feedback.

Exam dates and retake possibilities

exam and two resits

Student workload

Recorded lectures and examples 20 h, learning assignments 20 h either online or by distance learning in study environment and independent learning work 68 h. Total 108 h learning work.

Further information for students

Open AMK 50
Campusonline 100

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

To gaine the grade 0-5 you have to take part to the exam. In the course there is exam and two resits.

Adequate (1): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models your skills are clearly inadequate. You can solve simple basic problems in an adequate manner.

Satisfactory (2): You are familiar with the basic knowledge and terminology of statics but in creating mechanical models from real structures your skills are inadequate. You can satisfactorily solve simple basic problems.

Evaluation criteria, good (3-4)

Good (3): You are familiar with the knowledge of statics and calculating forces and stresses in simple structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Very good (4): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired to simple structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection

Evaluation criteria, excellent (5)

Excellent (5): You are familiar with the knowledge of statics and calculating forces and stresses in structures and you can apply the knowledge acquired in an innovative manner to more challenging structures to solve forces and stresses. You also understand those situations which require more precise and profound static inspection.

Evaluation criteria, pass/failed

Approved: You must calculate at least 75% of homework and you must get answers which are relatively correct from each week. You must get correct answer for at least 50% of the homework from each week.

Prerequisites

Handling powers and roots, reducing expressions, application of right and oblique triangle trigonometry, vector calculation, solving first and second degree polynomial equations and radical, exponential and logarithmic equations and pairs and sets of equations. SI unit system, transformation of units, magnitude calculation, constant velocity motion, motion with constant acceleration, vertical trajectory, oblique trajectory, Newton’s laws, friction and the elements of statics.

Further information

Studies are also offered to students outside of the study programs by Open University of Applied Sciences JAMK as well as through CampusOnline to the students of other Universities of Applied Sciences and Universities.