Skip to main content

Hardware engineering laboratory workLaajuus (2 cr)

Code: TSAAA630

Credits

2 op

Teaching language

  • Finnish

Responsible person

  • Veli-Matti Häkkinen
  • Vesa Hytönen

Objective

In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.

EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.

EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.

Content

Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation

Qualifications

Basic knowledge and understanding of the functionality of automation and electrical engineering devices.

Assessment criteria, approved/failed

To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.

Enrollment

01.11.2024 - 09.01.2025

Timing

13.01.2025 - 18.05.2025

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Veli-Matti Häkkinen
Groups
  • TSA24KMA
    Insinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus

Objectives

In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.

EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.

EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.

Content

Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation

Evaluation scale

0-5

Evaluation criteria, pass/failed

To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.

Prerequisites

Basic knowledge and understanding of the functionality of automation and electrical engineering devices.

Enrollment

01.08.2024 - 24.08.2024

Timing

16.10.2024 - 31.12.2024

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • English
Seats

0 - 15

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Sirpa Hukari
  • Veli-Matti Häkkinen
Groups
  • TAR22S1
    Bachelor's Degree Programme in Automation and Robotics

Objectives

In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.

EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.

EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.

Content

Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation

Time and location

Autumn 2024
Contacts at the main campus. Attendance required. Course cannot be taken remotely.

Learning materials and recommended literature

Learning environment (Moodle) materials

Teaching methods

The learning method used is problem-based learning. Concrete learning takes place through laboratory tasks and measurements. Guidance is provided in the laboratory while carrying out the tasks.

Practical training and working life connections

- work-related tasks

Exam dates and retake possibilities

There is no exam.

Alternative completion methods

The course includes exercises and laboratory work related to automation hardware design. The procedures for assessment are described in the examination regulations and the study guide. The course tutor will provide further information on any specific procedures for the course.

Student workload

Total workload 54 h of coursework, including preliminary assignments, laboratory work and reporting.

Content scheduling

Before the laboratory work, the preliminary tasks must have been completed. Each student will have two separate visits (one in the automation lab and one in the electrical lab).

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.

Evaluation scale

Pass/Fail

Evaluation criteria, pass/failed

To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.

Prerequisites

Basic knowledge and understanding of the functionality of automation and electrical engineering devices.

Enrollment

01.08.2024 - 22.08.2024

Timing

01.08.2024 - 31.12.2024

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Veli-Matti Häkkinen
Groups
  • TSA23SA
    Insinööri (AMK), sähkö- ja automaatiotekniikka, päivätoteutus

Objectives

In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.

EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.

EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.

Content

Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation

Time and location

Syksy 2024
Kontaktit pääkampuksella. Läsnäolo vaaditaan. Kurssia ei voi suorittaa etänä.

Learning materials and recommended literature

Learning environment (Moodle) materials

Teaching methods

Problem-based learning is used as a learning method. Learning takes place through learning tasks related to laboratory works.

Practical training and working life connections

- työelämälähtöiset tehtävät

Exam dates and retake possibilities

Tenttiä ei ole.

Alternative completion methods

The course includes laboratory works and assignments related to hardware engineering.

Student workload

Total study work 54 hours.

Content scheduling

Ennen laboratoriotöitä on niiden ennakkotehtävät oltuna tehtynä. Jokainen opiskelija käy kaksi erillistä kertaa tekemässä töitä (toinen kerta automaatiolabrassa ja toinen sähkölabrassa).

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.

Evaluation scale

Pass/Fail

Evaluation criteria, pass/failed

To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.

Prerequisites

Basic knowledge and understanding of the functionality of automation and electrical engineering devices.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 19.05.2024

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Sirpa Hukari
  • Jussi Tarvainen
  • Veli-Matti Häkkinen
Groups
  • TSA23KMA
    Insinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus

Objectives

In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.

EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.

EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.

Content

Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation

Learning materials and recommended literature

Learning environment (Moodle) materials

Teaching methods

Problem-based learning is used as a learning method. Learning takes place through learning tasks related to laboratory works.

Alternative completion methods

The course includes laboratory works and assignments related to hardware engineering.

Student workload

Total study work 54 hours.

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.

Evaluation scale

Pass/Fail

Evaluation criteria, pass/failed

To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.

Prerequisites

Basic knowledge and understanding of the functionality of automation and electrical engineering devices.

Enrollment

01.08.2023 - 24.08.2023

Timing

10.10.2023 - 19.12.2023

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Sirpa Hukari
  • Veli-Matti Häkkinen
Groups
  • TSA22SA
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.

EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.

EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.

Content

Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation

Learning materials and recommended literature

Learning environment (Moodle) materials

Teaching methods

Problem-based learning is used as a learning method. Learning takes place through learning tasks related to laboratory works.

Alternative completion methods

The course includes laboratory works and assignments related to hardware engineering.

Student workload

Total study work 54 hours.

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.

Evaluation scale

Pass/Fail

Evaluation criteria, pass/failed

To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.

Prerequisites

Basic knowledge and understanding of the functionality of automation and electrical engineering devices.

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 21.05.2023

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Sirpa Hukari
  • Veli-Matti Häkkinen
Groups
  • TSA22KMA
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.

EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.

EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.

Content

Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation

Learning materials and recommended literature

Learning environment (Moodle) materials

Teaching methods

Problem-based learning is used as a learning method. Learning takes place through learning tasks related to laboratory works.

Alternative completion methods

The course includes laboratory works and assignments related to hardware engineering.

Student workload

Total study work 54 hours.

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.

Evaluation scale

Pass/Fail

Evaluation criteria, pass/failed

To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.

Prerequisites

Basic knowledge and understanding of the functionality of automation and electrical engineering devices.

Enrollment

01.08.2022 - 25.08.2022

Timing

24.10.2022 - 31.12.2022

Number of ECTS credits allocated

2 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Sirpa Hukari
  • Veli-Matti Häkkinen
Groups
  • TSA21SA
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.

EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.

EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.

Content

Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation

Evaluation scale

Pass/Fail

Evaluation criteria, pass/failed

To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.

Prerequisites

Basic knowledge and understanding of the functionality of automation and electrical engineering devices.

Enrollment

01.11.2021 - 09.01.2022

Timing

01.01.2022 - 15.05.2022

Number of ECTS credits allocated

2 op

Virtual portion

1 op

Mode of delivery

50 % Face-to-face, 50 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

10 - 50

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Veli-Matti Häkkinen
  • Vesa Hytönen
Groups
  • TSA21KM
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.

EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.

EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.

Content

Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation

Learning materials and recommended literature

Learning environment (Moodle) materials

Teaching methods

Problem-based learning is used as a learning method. Learning takes place through learning tasks related to laboratory works.

Alternative completion methods

The course includes laboratory works and assignments related to hardware engineering.

Student workload

Total study work 54 hours.

Further information for students

Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.

Evaluation scale

Pass/Fail

Evaluation criteria, pass/failed

To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.

Prerequisites

Basic knowledge and understanding of the functionality of automation and electrical engineering devices.