Skip to main content

Basics of Data Network TechnologyLaajuus (4 cr)

Code: TSAT0530

Credits

4 op

Teaching language

  • Finnish

Responsible person

  • Karo Saharinen

Objective

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Qualifications

-

Assessment criteria, satisfactory (1)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Assessment criteria, good (3)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Assessment criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Enrollment

01.11.2024 - 09.01.2025

Timing

13.01.2025 - 18.05.2025

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Hyytiäinen
Groups
  • TSA23SA
    Insinööri (AMK), sähkö- ja automaatiotekniikka, päivätoteutus

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Learning materials and recommended literature

Saharinen, Karo. 2021. Data Networks. http://datanetworks.pages.labranet.jamk.fi. The right amount of learning materials for 4 ECTS is instructed/defined during the 2023 autumn semester.

Teaching methods

- Lectures (flipped learning video)
- Practical exercises, support in classroom or virtual support
- Demonstration of skills as personal assignments

Practical training and working life connections

The course will contain points of view from the industry on how data networks operate in Finland.

Exam dates and retake possibilities

The course will use JAMK's Exam Studio where you can reserve exam times based on your own calendar/timetable.

Alternative completion methods

The course can be done by accredition of competence. Agree upon the accreditation with the course lecturer. More information about accreditation in the degree regulations of JAMK and the study guide.

Student workload

4 ECTS * 27 h = 108 hours where,

33,25 h theory material, where
- 13,25 h = Video material/Lectures based on the text
- 20 h = re-reading the material
- 66,75 h = practical exercises
- 10 h = Self-study (reflecting, going through additional material, troubleshooting, using relevant tools)
- 4 h = Exam (this includes retakes if necessary)

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

01.11.2024 - 09.01.2025

Timing

13.01.2025 - 18.05.2025

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • English
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Hyytiäinen
Groups
  • TAR23S1
    Bachelor's Degree Programme in Automation and Robotics

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Learning materials and recommended literature

Saharinen, Karo. 2021. Data Networks. http://datanetworks.pages.labranet.jamk.fi. The right amount of learning materials for 4 ECTS is instructed/defined at the start of 2023 autumn semester.

Teaching methods

- Lectures (flipped learning video)
- Practical exercises, support in classroom or virtual support
- Demonstration of skills as personal assignments

Practical training and working life connections

The course will contain points of view from the industry on how data networks operate in Finland.

Exam dates and retake possibilities

The course will use JAMK's Exam Studio where you can reserve exam times based on your own calendar/timetable.

Alternative completion methods

The course can be done by accredition of competence. Agree upon the accreditation with the course lecturer. More information about accreditation in the degree regulations of JAMK and the study guide.

Student workload

4 ECTS * 27 h = 108 hours where,

33,25 h theory material, where
- 13,25 h = Video material/Lectures based on the text
- 20 h = re-reading the material
- 66,75 h = practical exercises
- 10 h = Self-study (reflecting, going through additional material, troubleshooting, using relevant tools)
- 4 h = Exam (this includes retakes if necessary)

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

01.11.2024 - 09.01.2025

Timing

13.01.2025 - 18.05.2025

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Lutakko Campus

Teaching languages
  • Finnish
Seats

20 - 35

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Hyytiäinen
Groups
  • TSA23SS
    Insinööri (AMK), sähkö- ja automaatiotekniikka, päivätoteutus

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Learning materials and recommended literature

Saharinen, Karo. 2023. Data Networks. http://datanetworks.pages.labranet.jamk.fi. The right amount of learning materials for 4 ECTS is instructed/defined during the 2023 autumn semester.

Teaching methods

- Lectures (flipped learning video)
- Practical exercises, support in classroom or virtual support
- Demonstration of skills as personal assignments

Practical training and working life connections

The course will contain points of view from the industry on how data networks operate in Finland.

Exam dates and retake possibilities

The course will use JAMK's Exam Studio where you can reserve exam times based on your own calendar/timetable.

Alternative completion methods

The course can be done by accredition of competence. Agree upon the accreditation with the course lecturer. More information about accreditation in the degree regulations of JAMK and the study guide.

Student workload

4 ECTS * 27 h = 108 hours where,

33,25 h theory material, where
- 13,25 h = Video material/Lectures based on the text
- 20 h = re-reading the material
- 66,75 h = practical exercises
- 10 h = Self-study (reflecting, going through additional material, troubleshooting, using relevant tools)
- 4 h = Exam (this includes retakes if necessary)

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

01.08.2024 - 22.08.2024

Timing

01.08.2024 - 31.12.2024

Number of ECTS credits allocated

4 op

Virtual portion

4 op

Mode of delivery

Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Hyytiäinen
Groups
  • TSA23KMS
    Insinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
  • TSA23KMA
    Insinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Learning materials and recommended literature

Saharinen, Karo. 2021. Data Networks. http://datanetworks.pages.labranet.jamk.fi. The right amount of learning materials for 4 ECTS is instructed/defined during the 2023 autumn semester.

Teaching methods

- Lectures (flipped learning video)
- Practical exercises, virtual support
- Demonstration of skills as personal assignments

Practical training and working life connections

The course will contain points of view from the industry on how data networks operate in Finland.

Exam dates and retake possibilities

The course will use JAMK's Exam Studio where you can reserve exam times based on your own calendar/timetable.

Alternative completion methods

The course can be done by accredition of competence. Agree upon the accreditation with the course lecturer. More information about accreditation in the degree regulations of JAMK and the study guide.

Student workload

4 ECTS * 27 h = 108 hours where,

33,25 h theory material, where
- 13,25 h = Video material/Lectures based on the text
- 20 h = re-reading the material
- 66,75 h = practical exercises
- 10 h = Self-study (reflecting, going through additional material, troubleshooting, using relevant tools)
- 4 h = Exam (this includes retakes if necessary)

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

20.11.2023 - 04.01.2024

Timing

01.01.2024 - 19.05.2024

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • English
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Antti Häkkinen
Groups
  • TAR22S1
    Bachelor's Degree Programme in Automation and Robotics

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Learning materials and recommended literature

Saharinen, Karo. 2023. Data Networks. http://datanetworks.pages.labranet.jamk.fi. The right amount of learning materials for 4 ECTS is instructed/defined during the 2023 autumn semester.

Teaching methods

- Lectures (flipped learning video or in classroom)
- Practical exercises
- Demonstration of skills as personal assignments

Practical training and working life connections

The course will contain points of view from the industry on how data networks operate in Finland.

Exam dates and retake possibilities

The course will use JAMK's Exam Studio where you can reserve exam times based on your own calendar/timetable.

Alternative completion methods

The course can be done by accredition of competence. Agree upon the accreditation with the course lecturer. More information about accreditation in the degree regulations of JAMK and the study guide.

Student workload

4 ECTS * 27 h = 108 hours where,

33,25 h theory material, where
- 13,25 h = Video material/Lectures based on the text
- 20 h = re-reading the material
- 66,75 h = practical exercises
- 10 h = Self-study (reflecting, going through additional material, troubleshooting, using relevant tools)
- 4 h = Exam (this includes retakes if necessary)

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

20.11.2023 - 04.01.2024

Timing

01.01.2024 - 28.04.2024

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Antti Häkkinen
Groups
  • TSA22SS
    Sähkö- ja automaatiotekniikka (AMK)
  • TSA22SA
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Learning materials and recommended literature

Saharinen, Karo. 2021. Data Networks. http://datanetworks.pages.labranet.jamk.fi. The right amount of learning materials for 4 ECTS is instructed/defined during the 2023 autumn semester.

Teaching methods

- Lectures (flipped learning video or in classroom)
- Practical exercises
- Demonstration of skills as personal assignments

Practical training and working life connections

The course will contain points of view from the industry on how data networks operate in Finland.

Exam dates and retake possibilities

The course will use JAMK's Exam Studio where you can reserve exam times based on your own calendar/timetable.

Alternative completion methods

The course can be done by accredition of competence. Agree upon the accreditation with the course lecturer. More information about accreditation in the degree regulations of JAMK and the study guide.

Student workload

4 ECTS * 27 h = 108 hours where,

33,25 h theory material, where
- 13,25 h = Video material/Lectures based on the text
- 20 h = re-reading the material
- 66,75 h = practical exercises
- 10 h = Self-study (reflecting, going through additional material, troubleshooting, using relevant tools)
- 4 h = Exam (this includes retakes if necessary)

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

01.08.2023 - 24.08.2023

Timing

28.08.2023 - 19.12.2023

Number of ECTS credits allocated

4 op

Virtual portion

2.5 op

Mode of delivery

38 % Face-to-face, 62 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Karo Saharinen
Groups
  • TSA22KMA
    Sähkö- ja automaatiotekniikka (AMK)
  • TSA22KMS
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Learning materials and recommended literature

Saharinen, Karo. 2021. Data Networks. http://datanetworks.pages.labranet.jamk.fi. The right amount of learning materials for 4 ECTS is instructed/defined at the start of 2023 autumn semester.

Teaching methods

- Lectures (flipped learning video)
- Practical exercises, virtual support
- Demonstration of skills as personal assignments

Practical training and working life connections

The course will contain points of view from the industry on how data networks operate in Finland.

Exam dates and retake possibilities

The course will use JAMK's Exam Studio where you can reserve exam times based on your own calendar/timetable.

Alternative completion methods

The course can be done by accredition of competence. Agree upon the accreditation with the course lecturer. More information about accreditation in the degree regulations of JAMK and the study guide.

Student workload

4 ECTS * 27 h = 108 hours where,

33,25 h theory material, where
- 13,25 h = Video material/Lectures based on the text
- 20 h = re-reading the material
- 66,75 h = practical exercises
- 10 h = Self-study (reflecting, going through additional material, troubleshooting, using relevant tools)
- 4 h = Exam (this includes retakes if necessary)

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 28.04.2023

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Hyytiäinen
Groups
  • TSA21SA
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Time and location

Lutakon kampus

Learning materials and recommended literature

Opintojakson materiaalisivut (luentomateriaali, laboratorioharjoitusohjeet, kotitehtävät)

Teaching methods

Lähikontaktit (luennot, tentti, opettajan johdolla tehtävät ja omatoimiset harjoitukset)
Etäopiskelu (kotitehtävät, tenttiin valmistautuminen)

Student workload

Kontaktiopetus 45 h (luennot, laboratorioharjoitukset ja tentti)
Etäopiskelu 63 h (kotitehtävät, tenttiin valmistautuminen)
Yhteensä 108 h

Further information for students

Arviointi tapahtuu opintojakson kokeen perusteella. Laboratorioharjoitukset arvioidaan asteikolla Hyväksytty/Hylätty.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

01.11.2022 - 05.01.2023

Timing

09.01.2023 - 28.04.2023

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 35

Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Hyytiäinen
Groups
  • TSA21SB
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

01.08.2022 - 25.08.2022

Timing

29.08.2022 - 21.12.2022

Number of ECTS credits allocated

4 op

Virtual portion

3 op

Mode of delivery

25 % Face-to-face, 75 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Pasi Hyytiäinen
Groups
  • TSA21KMB
    Sähkö- ja automaatiotekniikka (AMK)
  • TSA21KMA
    Sähkö- ja automaatiotekniikka (AMK)

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Time and location

Lutakon kampus

Learning materials and recommended literature

Opintojakson materiaalisivut (opintojakson materiaali, harjoitusten ohjeet, kotitehtävät)

Teaching methods

Verkossa tapahtuva ohjaus opintojakson harjoituksiin liittyen
Etäopiskelu (kotitehtävät, laboratorioharjoitukset, tenttiin valmistautuminen)

Student workload

Verkossa tapahtuva ohjaus 20 h
Etäopiskelu 88 h (kotitehtävät, laboratorioharjoitukset, tenttiin valmistautuminen)
Yhteensä 108 h

Further information for students

Arviointi tapahtuu opintojakson kokeen perusteella. Laboratorioharjoitukset arvioidaan asteikolla Hyväksytty/Hylätty.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

01.11.2021 - 09.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Antti Häkkinen
Groups
  • TSA20SA
    Bachelor's Degree Programme in Electrical and Automation Engineering
  • TSA20S1
    Bachelor's Degree Programme in Electrical and Automation Engineering

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Time and location

Lutakon kampus

Learning materials and recommended literature

Opintojakson materiaalisivut (luentomateriaali, laboratorioharjoitusohjeet, kotitehtävät)

Teaching methods

Lähikontaktit (luennot, tentti, opettajan johdolla tehtävät ja omatoimiset harjoitukset)
Etäopiskelu (kotitehtävät, tenttiin valmistautuminen)

Student workload

Kontaktiopetus 45 h (luennot, laboratorioharjoitukset ja tentti)
Etäopiskelu 63 h (kotitehtävät, tenttiin valmistautuminen)
Yhteensä 108 h

Further information for students

Arviointi tapahtuu opintojakson kokeen perusteella. Laboratorioharjoitukset arvioidaan asteikolla Hyväksytty/Hylätty.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-

Enrollment

01.11.2021 - 09.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

4 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
  • Antti Häkkinen
Groups
  • TSA20SB
    Bachelor's Degree Programme in Electrical and Automation Engineering

Objectives

Student becomes familiar with information networks to the extent necessary from the point of view of automation and electrical engineering. By the course, the student acquires such basic knowledge of data transmission and data networks that is able to understand, for example, the structure of the data network between devices included in the automation system and the principles of data transmission. This course enables further studies of the subject in other courses.

EUR-ACE KNOWLEDGE AND UNDERSTANDING
Student is familiar with the concepts related to the data transmission network and the principles of data transmission of the most important active devices in the network, as well as the most important tasks. Student understands the steps of data transfer.

EUR-ACE APPLYING TECHNOLOGY INTO PRACTICE
Student is able to design and implement the most important services for local area network in electrical and automation technology. Student is able to analyze the data flow in network.

Content

Different steps of data transfer
Operating principle of the most important active devices in the network
Analysis of the data flow in network
Design and implementation of the local area network and its key services

Time and location

Lutakon kampus

Learning materials and recommended literature

Opintojakson materiaalisivut (luentomateriaali, laboratorioharjoitusohjeet, kotitehtävät)

Teaching methods

Lähikontaktit (luennot, tentti, opettajan johdolla tehtävät ja omatoimiset harjoitukset)
Etäopiskelu (kotitehtävät, tenttiin valmistautuminen)

Student workload

Kontaktiopetus 45 h (luennot, laboratorioharjoitukset ja tentti)
Etäopiskelu 63 h (kotitehtävät, tenttiin valmistautuminen)
Yhteensä 108 h

Further information for students

Arviointi tapahtuu opintojakson kokeen perusteella. Laboratorioharjoitukset arvioidaan asteikolla Hyväksytty/Hylätty.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Sufficient (1): Student knows the basic concepts related to data transmission networks and understands the principles and tasks of data transmission of active devices in the network. Student is just able to interpret the content of measured and analyzed data stream. In addition, student is able to plan and implement the local area network and its key services and functions at a sufficient level.

Satisfactory (2): Student is familiar with the basic concepts related to data transmission networks and has a satisfactory understanding of the principles and tasks of data transmission for active devices in the network. Student is able to interpret the content of a partially measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a satisfactory level.

Evaluation criteria, good (3-4)

Good (3): Student is familiar with the basic concepts related to data transmission networks and has a good understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the most important aspects of the content of the measured and analyzed data stream. In addition, student is able to design and implement a local area network and its key services and functions at a good level.

Very good (4): Student is familiar with the basic concepts related to data transmission networks and has a very good understanding of the principles and tasks of data transmission in the active devices of the network. Student is able to interpret the content of the measured and analyzed data stream mainly. In addition, student is able to design and implement a local area network and its key services and functions at a very good level.

Evaluation criteria, excellent (5)

Excellent (5): Student is familiar with the basic concepts related to data transmission networks and has an excellent understanding of the principles and tasks of data transmission of active devices in the network. Student is able to interpret the content of the measured and analyzed data stream without any problems. In addition, student is able to design and implement the local area network and its key services and functions at an excellent level.

Prerequisites

-