Hardware engineering laboratory workLaajuus (2 cr)
Code: TSAAA630
Credits
2 op
Teaching language
- Finnish
Responsible person
- Veli-Matti Häkkinen
- Vesa Hytönen
Objective
In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.
EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.
EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.
Content
Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation
Qualifications
Basic knowledge and understanding of the functionality of automation and electrical engineering devices.
Assessment criteria, approved/failed
To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.
Enrollment
01.11.2024 - 09.01.2025
Timing
01.01.2025 - 18.05.2025
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Veli-Matti Häkkinen
Groups
-
TSA24KMAInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
Objectives
In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.
EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.
EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.
Content
Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation
Evaluation scale
0-5
Evaluation criteria, pass/failed
To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.
Prerequisites
Basic knowledge and understanding of the functionality of automation and electrical engineering devices.
Enrollment
01.08.2024 - 24.08.2024
Timing
16.10.2024 - 31.12.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Seats
0 - 15
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Sirpa Hukari
- Veli-Matti Häkkinen
Groups
-
TAR22S1Bachelor's Degree Programme in Automation and Robotics
Objectives
In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.
EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.
EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.
Content
Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation
Time and location
Autumn 2024
Contacts at the main campus. Attendance required. Course cannot be taken remotely.
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
The learning method used is problem-based learning. Concrete learning takes place through laboratory tasks and measurements. Guidance is provided in the laboratory while carrying out the tasks.
Practical training and working life connections
- work-related tasks
Exam dates and retake possibilities
There is no exam.
Alternative completion methods
The course includes exercises and laboratory work related to automation hardware design. The procedures for assessment are described in the examination regulations and the study guide. The course tutor will provide further information on any specific procedures for the course.
Student workload
Total workload 54 h of coursework, including preliminary assignments, laboratory work and reporting.
Content scheduling
Before the laboratory work, the preliminary tasks must have been completed. Each student will have two separate visits (one in the automation lab and one in the electrical lab).
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.
Prerequisites
Basic knowledge and understanding of the functionality of automation and electrical engineering devices.
Enrollment
01.08.2024 - 22.08.2024
Timing
01.08.2024 - 31.12.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
20 - 35
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Veli-Matti Häkkinen
Groups
-
TSA23SAInsinööri (AMK), sähkö- ja automaatiotekniikka, päivätoteutus
Objectives
In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.
EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.
EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.
Content
Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation
Time and location
Syksy 2024
Kontaktit pääkampuksella. Läsnäolo vaaditaan. Kurssia ei voi suorittaa etänä.
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through learning tasks related to laboratory works.
Practical training and working life connections
- työelämälähtöiset tehtävät
Exam dates and retake possibilities
Tenttiä ei ole.
Alternative completion methods
The course includes laboratory works and assignments related to hardware engineering.
Student workload
Total study work 54 hours.
Content scheduling
Ennen laboratoriotöitä on niiden ennakkotehtävät oltuna tehtynä. Jokainen opiskelija käy kaksi erillistä kertaa tekemässä töitä (toinen kerta automaatiolabrassa ja toinen sähkölabrassa).
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.
Prerequisites
Basic knowledge and understanding of the functionality of automation and electrical engineering devices.
Enrollment
20.11.2023 - 04.01.2024
Timing
08.01.2024 - 19.05.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Sirpa Hukari
- Jussi Tarvainen
- Veli-Matti Häkkinen
Groups
-
TSA23KMAInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
Objectives
In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.
EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.
EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.
Content
Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through learning tasks related to laboratory works.
Alternative completion methods
The course includes laboratory works and assignments related to hardware engineering.
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.
Prerequisites
Basic knowledge and understanding of the functionality of automation and electrical engineering devices.
Enrollment
01.08.2023 - 24.08.2023
Timing
10.10.2023 - 19.12.2023
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Sirpa Hukari
- Veli-Matti Häkkinen
Groups
-
TSA22SASähkö- ja automaatiotekniikka (AMK)
Objectives
In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.
EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.
EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.
Content
Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through learning tasks related to laboratory works.
Alternative completion methods
The course includes laboratory works and assignments related to hardware engineering.
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.
Prerequisites
Basic knowledge and understanding of the functionality of automation and electrical engineering devices.
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 21.05.2023
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Sirpa Hukari
- Veli-Matti Häkkinen
Groups
-
TSA22KMASähkö- ja automaatiotekniikka (AMK)
Objectives
In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.
EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.
EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.
Content
Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through learning tasks related to laboratory works.
Alternative completion methods
The course includes laboratory works and assignments related to hardware engineering.
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.
Prerequisites
Basic knowledge and understanding of the functionality of automation and electrical engineering devices.
Enrollment
01.08.2022 - 25.08.2022
Timing
24.10.2022 - 31.12.2022
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Sirpa Hukari
- Veli-Matti Häkkinen
Groups
-
TSA21SASähkö- ja automaatiotekniikka (AMK)
Objectives
In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.
EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.
EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.
Content
Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.
Prerequisites
Basic knowledge and understanding of the functionality of automation and electrical engineering devices.
Enrollment
01.11.2021 - 09.01.2022
Timing
01.01.2022 - 15.05.2022
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
10 - 50
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Veli-Matti Häkkinen
- Vesa Hytönen
Groups
-
TSA21KMSähkö- ja automaatiotekniikka (AMK)
Objectives
In the laboratory environment, you will orientate to field devices, their installation technology, circuit connection methods and their testing technology, electrical drives, etc. These topics are covered in the other courses of the hardware design module. You can use what you have learned here, for example, in commissioning tasks.
EUR-ACE ENGINEERING PRACTICE
You know how to work with automation devices during its commissioning, testing, troubleshooting, etc. when working in device-related tasks.
EUR-ACE INVESTIGATIONS
You will be able to plan and implement experimental studies, interpret documents, other input data and results, as well as evaluate the validity of measurements and work in a device environment safely and in accordance with good practices.
Content
Charasteristic curves of control valves
Cold testing
Tuning of transmitters
Cross connections
Commissioning practices
Laboratory works of electrical drives
Active and passive transmitters
Inspection of safety-related automation
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through learning tasks related to laboratory works.
Alternative completion methods
The course includes laboratory works and assignments related to hardware engineering.
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the skills demonstrated in the assignments and laboratory works.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know how to work safely with automation hardware and be able to use your skills effectively in testing, operating and commissioning tasks. You are able to get additional information related to the work tasks by using different methods, applying theory in practice. You master the execution of connections and measurements with electrical drives.
Prerequisites
Basic knowledge and understanding of the functionality of automation and electrical engineering devices.