Electrical Engineering Laboratory WorkLaajuus (2 cr)
Code: TSAS0510
Credits
2 op
Teaching language
- Finnish
Responsible person
- Olli Väänänen
Objective
You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.
EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.
EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.
Content
components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities
Qualifications
Knowledge of electrical engineering theory
Assessment criteria, approved/failed
Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.
Enrollment
20.11.2023 - 10.01.2024
Timing
01.01.2024 - 31.12.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
- Jussi Tarvainen
Groups
-
TSA24KMInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
-
ZJATSA24KMAvoin amk, Sähkö- ja automaatiotekniikka, Monimuoto
Objectives
You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.
EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.
EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.
Content
components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities
Learning materials and recommended literature
Material provided by the teacher
Teaching methods
The learning methods are the electrical circuit connections made in the electrical laboratory and the related measurements made with multi meters, as well as the calculation tasks related to the circuits.
Student workload
A total of 54 hours of learning work.
Further information for students
Avoin AMK monimuotototeutus 5 paikkaa
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.
Prerequisites
Knowledge of electrical engineering theory
Enrollment
01.08.2023 - 04.01.2024
Timing
28.08.2023 - 19.05.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 15
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
- Jussi Tarvainen
Groups
-
TSA23SR1Sähkö- ja automaatiotekniikka (AMK)
-
TSA23SR2Sähkö- ja automaatiotekniikka (AMK)
Objectives
You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.
EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.
EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.
Content
components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities
Evaluation scale
0-5
Evaluation criteria, pass/failed
Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.
Prerequisites
Knowledge of electrical engineering theory
Enrollment
01.08.2023 - 24.08.2023
Timing
01.08.2023 - 19.05.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
Groups
-
TAR23S1Bachelor's Degree Programme in Automation and Robotics
Objectives
You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.
EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.
EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.
Content
components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities
Evaluation scale
0-5
Evaluation criteria, pass/failed
Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.
Prerequisites
Knowledge of electrical engineering theory
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 31.12.2023
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
Groups
-
TSA23KMInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
-
ZJATSA23KMAvoin amk, AMK-polut, Sähkö-ja automaatiotekniikka, Monimuoto
Objectives
You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.
EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.
EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.
Content
components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities
Learning materials and recommended literature
Material provided by the teacher
Teaching methods
The learning methods are the electrical circuit connections made in the electrical laboratory and the related measurements made with multi meters, as well as the calculation tasks related to the circuits.
Student workload
A total of 54 hours of learning work.
Further information for students
Avoin AMK monimuotototeutus 5 paikkaa
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.
Prerequisites
Knowledge of electrical engineering theory
Enrollment
01.08.2022 - 25.08.2022
Timing
22.08.2022 - 21.05.2023
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
Groups
-
ZJATSA22S1Avoin amk, Sähkö- ja automaatiotekniikka, Päivä
-
TSA22SR1Sähkö- ja automaatiotekniikka (AMK)
-
TSA22SR2Sähkö- ja automaatiotekniikka (AMK)
Objectives
You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.
EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.
EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.
Content
components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities
Learning materials and recommended literature
Material provided by the teacher
Teaching methods
The learning methods are the electrical circuit connections made in the electrical laboratory and the related measurements made with multi meters, as well as the calculation tasks related to the circuits.
Student workload
A total of 54 hours of learning work.
Further information for students
Avoin AMK monimuotototeutus 5 paikkaa
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.
Prerequisites
Knowledge of electrical engineering theory
Enrollment
24.08.2022 - 26.08.2022
Timing
22.08.2022 - 21.05.2023
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
Teacher in charge
Ari Latvala
Groups
-
TAR22S1Bachelor's Degree Programme in Automation and Robotics
Objectives
You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.
EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.
EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.
Content
components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities
Learning materials and recommended literature
Material provided by the teacher
Teaching methods
The learning methods are the electrical circuit connections made in the electrical laboratory and the related measurements made with multi meters, as well as the calculation tasks related to the circuits.
Student workload
A total of 54 hours of learning work.
Further information for students
Avoin AMK monimuotototeutus 5 paikkaa
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.
Prerequisites
Knowledge of electrical engineering theory
Enrollment
01.11.2021 - 09.01.2022
Timing
01.01.2022 - 30.12.2022
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
Groups
-
TSA22KMInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
Objectives
You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.
EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.
EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.
Content
components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities
Learning materials and recommended literature
Material provided by the teacher
Teaching methods
The learning methods are the electrical circuit connections made in the electrical laboratory and the related measurements made with multi meters, as well as the calculation tasks related to the circuits.
Student workload
A total of 54 hours of learning work.
Further information for students
Avoin AMK monimuotototeutus 5 paikkaa
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.
Prerequisites
Knowledge of electrical engineering theory
Enrollment
02.08.2021 - 05.09.2021
Timing
01.08.2021 - 15.05.2022
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
Groups
-
TSA21SASähkö- ja automaatiotekniikka (AMK)
-
ZJA21STPPSAAvoin amk, tekniikka, Sähkö ja automaatiotekniikka, päivä
Objectives
You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.
EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.
EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.
Content
components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities
Learning materials and recommended literature
Material provided by the teacher
Teaching methods
The learning methods are the electrical circuit connections made in the electrical laboratory and the related measurements made with multi meters, as well as the calculation tasks related to the circuits.
Student workload
A total of 54 hours of learning work.
Further information for students
Avoin AMK monimuotototeutus 5 paikkaa
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.
Prerequisites
Knowledge of electrical engineering theory
Enrollment
02.08.2021 - 05.09.2021
Timing
01.08.2021 - 15.05.2022
Number of ECTS credits allocated
2 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Ari Latvala
Groups
-
TSA21SBSähkö- ja automaatiotekniikka (AMK)
-
ZJA21STPPSAAvoin amk, tekniikka, Sähkö ja automaatiotekniikka, päivä
Objectives
You will get acquainted with the basic measurements and equipment technology of electrical engineering and learn to apply the theory of electrical engineering in practice by making laboratory measurements. You will learn the basics of electrical safety and be able to perform measurements of basic electrical quantities.
EUR-ACE ENGINEERING PRACTICE
You will be able to analyze direct current and alternating current circuits, applying practice and theory, taking measurements and interpreting their results.
EUR-ACE INVESTIGATIONS AND INFORMATION RETRIEVAL
You can plan and carry out experimental studies, interpret input data and results, and evaluate the correctness of measurements and work safely in an electrical laboratory environment.
Content
components
direct current and alternating current circuits
measurement arrangements
electrical safety
electronic circuit diagrams
measuring devices
measurement of electrical quantities
Learning materials and recommended literature
Material provided by the teacher
Teaching methods
The learning methods are the electrical circuit connections made in the electrical laboratory and the related measurements made with multi meters, as well as the calculation tasks related to the circuits.
Student workload
A total of 54 hours of learning work.
Further information for students
Avoin AMK monimuotototeutus 5 paikkaa
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Completed S: You know the basics of electrical safety and you can perform measurements of basic electrical quantities.
Prerequisites
Knowledge of electrical engineering theory