Electric Building Engineering ProjectLaajuus (3 cr)
Code: TSAR0620
Credits
3 op
Teaching language
- Finnish
Responsible person
- Vesa Hytönen
Objective
You will become familiar with an electrical engineering in building project from the perspective of implementation. Studying in this course requires knowledge of electrical engineering. This course provides the skills needed for projects in this field of engineering.
EUR-ACE ENGINEERING PRACTICE
You are able to create documentation related to the building's electrical systems. The documentation consists of a grounding diagram, switchboard schematic, electrical floor plan and various lists.
EA-CT COMMUNICATION AND TEAM-WORKING
Yo have the ability to communicate effectively about information, ideas, problems and solutions in the project team. You know how to work effectively as an individual and as a member of a project team.
Content
Introduction to building electrical engineering software
Considering the initial data of an electrical engineering in building project
Setting up a project team and work task assignments
Planning, monitoring and reporting of the planning project
Producing engineering project documentation
Quality assessment of project documentation
Qualifications
Basic knowledge of electrical engineering
Assessment criteria, approved/failed
To pass this course you need to master the use of an electrical engineering in buildings software and you are able to create electrical documentation of buildings as part of a project team. You are able to make progress at different stages of the project using professional communication and participate in the evaluation of the quality of the documentation.
Enrollment
01.11.2024 - 09.01.2025
Timing
13.01.2025 - 30.03.2025
Number of ECTS credits allocated
3 op
Virtual portion
2 op
Mode of delivery
34 % Face-to-face, 66 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA23KMSInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
-
TSA23KMAInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
-
ZJA25KTSAPAvoin amk, Sähköpätevyys, monimuoto
-
ZJA24STSAPAvoin amk, Sähköpätevyys, monimuoto
Objectives
You will become familiar with an electrical engineering in building project from the perspective of implementation. Studying in this course requires knowledge of electrical engineering. This course provides the skills needed for projects in this field of engineering.
EUR-ACE ENGINEERING PRACTICE
You are able to create documentation related to the building's electrical systems. The documentation consists of a grounding diagram, switchboard schematic, electrical floor plan and various lists.
EA-CT COMMUNICATION AND TEAM-WORKING
Yo have the ability to communicate effectively about information, ideas, problems and solutions in the project team. You know how to work effectively as an individual and as a member of a project team.
Content
Introduction to building electrical engineering software
Considering the initial data of an electrical engineering in building project
Setting up a project team and work task assignments
Planning, monitoring and reporting of the planning project
Producing engineering project documentation
Quality assessment of project documentation
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons. Project work is included in this study unit.
Practical training and working life connections
Working life cooperation is carried out in the project in the form of CADMATIC Electrical training.
Alternative completion methods
Project work (no examination)
Student workload
The total calculated workload for a student is 81 hours of coursework.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the skills demonstrated in the project work.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to master the use of an electrical engineering in buildings software and you are able to create electrical documentation of buildings as part of a project team. You are able to make progress at different stages of the project using professional communication and participate in the evaluation of the quality of the documentation.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.08.2023 - 22.08.2024
Timing
07.10.2024 - 18.12.2024
Number of ECTS credits allocated
3 op
Virtual portion
2 op
Mode of delivery
34 % Face-to-face, 66 % Online learning
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA22SSSähkö- ja automaatiotekniikka (AMK)
-
TSA22SASähkö- ja automaatiotekniikka (AMK)
Objectives
You will become familiar with an electrical engineering in building project from the perspective of implementation. Studying in this course requires knowledge of electrical engineering. This course provides the skills needed for projects in this field of engineering.
EUR-ACE ENGINEERING PRACTICE
You are able to create documentation related to the building's electrical systems. The documentation consists of a grounding diagram, switchboard schematic, electrical floor plan and various lists.
EA-CT COMMUNICATION AND TEAM-WORKING
Yo have the ability to communicate effectively about information, ideas, problems and solutions in the project team. You know how to work effectively as an individual and as a member of a project team.
Content
Introduction to building electrical engineering software
Considering the initial data of an electrical engineering in building project
Setting up a project team and work task assignments
Planning, monitoring and reporting of the planning project
Producing engineering project documentation
Quality assessment of project documentation
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons. Project work is included in this study unit.
Practical training and working life connections
Working life cooperation is carried out in the project in the form of CADMATIC Electrical training.
Alternative completion methods
Project work (no examination)
Student workload
The total calculated workload for a student is 81 hours of coursework.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the skills demonstrated in the project work.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to master the use of an electrical engineering in buildings software and you are able to create electrical documentation of buildings as part of a project team. You are able to make progress at different stages of the project using professional communication and participate in the evaluation of the quality of the documentation.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
20.11.2023 - 04.01.2024
Timing
08.01.2024 - 10.03.2024
Number of ECTS credits allocated
3 op
Virtual portion
3 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- Finnish
Seats
0 - 35
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA22KMASähkö- ja automaatiotekniikka (AMK)
-
TSA22KMSSähkö- ja automaatiotekniikka (AMK)
Objectives
You will become familiar with an electrical engineering in building project from the perspective of implementation. Studying in this course requires knowledge of electrical engineering. This course provides the skills needed for projects in this field of engineering.
EUR-ACE ENGINEERING PRACTICE
You are able to create documentation related to the building's electrical systems. The documentation consists of a grounding diagram, switchboard schematic, electrical floor plan and various lists.
EA-CT COMMUNICATION AND TEAM-WORKING
Yo have the ability to communicate effectively about information, ideas, problems and solutions in the project team. You know how to work effectively as an individual and as a member of a project team.
Content
Introduction to building electrical engineering software
Considering the initial data of an electrical engineering in building project
Setting up a project team and work task assignments
Planning, monitoring and reporting of the planning project
Producing engineering project documentation
Quality assessment of project documentation
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons. Project work is included in this study unit.
Practical training and working life connections
Working life cooperation is carried out in the project in the form of CADMATIC Electrical training.
Alternative completion methods
Project work (no examination)
Student workload
Total study work 81 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the skills demonstrated in the project work.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to master the use of an electrical engineering in buildings software and you are able to create electrical documentation of buildings as part of a project team. You are able to make progress at different stages of the project using professional communication and participate in the evaluation of the quality of the documentation.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.08.2023 - 24.08.2023
Timing
23.10.2023 - 19.12.2023
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Face-to-face, 33 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA21SASähkö- ja automaatiotekniikka (AMK)
-
TSA21SBSähkö- ja automaatiotekniikka (AMK)
Objectives
You will become familiar with an electrical engineering in building project from the perspective of implementation. Studying in this course requires knowledge of electrical engineering. This course provides the skills needed for projects in this field of engineering.
EUR-ACE ENGINEERING PRACTICE
You are able to create documentation related to the building's electrical systems. The documentation consists of a grounding diagram, switchboard schematic, electrical floor plan and various lists.
EA-CT COMMUNICATION AND TEAM-WORKING
Yo have the ability to communicate effectively about information, ideas, problems and solutions in the project team. You know how to work effectively as an individual and as a member of a project team.
Content
Introduction to building electrical engineering software
Considering the initial data of an electrical engineering in building project
Setting up a project team and work task assignments
Planning, monitoring and reporting of the planning project
Producing engineering project documentation
Quality assessment of project documentation
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons. Project work is included in this study unit.
Practical training and working life connections
Working life cooperation is carried out in the project in the form of CADMATIC Electrical training.
Alternative completion methods
Project work (no examination)
Student workload
Total study work 81 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the skills demonstrated in the project work.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to master the use of an electrical engineering in buildings software and you are able to create electrical documentation of buildings as part of a project team. You are able to make progress at different stages of the project using professional communication and participate in the evaluation of the quality of the documentation.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 05.03.2023
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Face-to-face, 33 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA21KMBSähkö- ja automaatiotekniikka (AMK)
-
TSA21KMASähkö- ja automaatiotekniikka (AMK)
Objectives
You will become familiar with an electrical engineering in building project from the perspective of implementation. Studying in this course requires knowledge of electrical engineering. This course provides the skills needed for projects in this field of engineering.
EUR-ACE ENGINEERING PRACTICE
You are able to create documentation related to the building's electrical systems. The documentation consists of a grounding diagram, switchboard schematic, electrical floor plan and various lists.
EA-CT COMMUNICATION AND TEAM-WORKING
Yo have the ability to communicate effectively about information, ideas, problems and solutions in the project team. You know how to work effectively as an individual and as a member of a project team.
Content
Introduction to building electrical engineering software
Considering the initial data of an electrical engineering in building project
Setting up a project team and work task assignments
Planning, monitoring and reporting of the planning project
Producing engineering project documentation
Quality assessment of project documentation
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons. Project work is included in this study unit.
Practical training and working life connections
Working life cooperation is carried out in the project in the form of CADMATIC Electrical training.
Alternative completion methods
Project work (no examination)
Student workload
Total study work 81 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the skills demonstrated in the project work.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to master the use of an electrical engineering in buildings software and you are able to create electrical documentation of buildings as part of a project team. You are able to make progress at different stages of the project using professional communication and participate in the evaluation of the quality of the documentation.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.08.2022 - 25.08.2022
Timing
26.10.2022 - 31.12.2022
Number of ECTS credits allocated
3 op
Virtual portion
1 op
Mode of delivery
67 % Face-to-face, 33 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA20SABachelor's Degree Programme in Electrical and Automation Engineering
-
TSA20SBBachelor's Degree Programme in Electrical and Automation Engineering
Objectives
You will become familiar with an electrical engineering in building project from the perspective of implementation. Studying in this course requires knowledge of electrical engineering. This course provides the skills needed for projects in this field of engineering.
EUR-ACE ENGINEERING PRACTICE
You are able to create documentation related to the building's electrical systems. The documentation consists of a grounding diagram, switchboard schematic, electrical floor plan and various lists.
EA-CT COMMUNICATION AND TEAM-WORKING
Yo have the ability to communicate effectively about information, ideas, problems and solutions in the project team. You know how to work effectively as an individual and as a member of a project team.
Content
Introduction to building electrical engineering software
Considering the initial data of an electrical engineering in building project
Setting up a project team and work task assignments
Planning, monitoring and reporting of the planning project
Producing engineering project documentation
Quality assessment of project documentation
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons. Project work is included in this study unit.
Practical training and working life connections
Working life cooperation is carried out in the project in the form of CADMATIC Electrical training.
Alternative completion methods
Project work (no examination)
Student workload
Total study work 81 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the skills demonstrated in the project work.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to master the use of an electrical engineering in buildings software and you are able to create electrical documentation of buildings as part of a project team. You are able to make progress at different stages of the project using professional communication and participate in the evaluation of the quality of the documentation.
Prerequisites
Basic knowledge of electrical engineering