Skip to main content

Product DevelopmentLaajuus (5 cr)

Code: TKSP0100

Credits

5 op

Teaching language

  • Finnish

Responsible person

  • Janne Lappi
  • Kalevi Jaaranen

Objective

After completing this course, you will understand the importance of product development for the success of a company. You will learn about the impact of product development on the environment and society, taking into account the principles of sustainable development. In the product development phase, the most significant decisions are made during the product's life cycle, how the product binds energy and natural resources during its life cycle, and how the product is phased out in a controlled and predictable manner through recycling.

You will get the impression that product development is a systematic and process-like activity, starting with customer needs and ending with successful products through product conceptualization. You are also aware of the importance of product protection as part of the operations of a successful company. During the course, you will develop your cooperation skills as an active member of a product development team and also as a possible team leader.

Engineering practice:
You can use appropriate methods in a product development process and develop complicated products, processes and systems.

Multidisciplinary competences:
You will be able to make objective decisions by comparing complex technical and economic solutions, taking into account sustainable development.

Communication and team-working:
You can work as a team member in a productive way. You can do co-operation with your engineer colleagues and bring out your ideas on troubleshooting cases.

Content

Product development. Product development process. Product development projects. Creative working methods. Immaterial rights. Practice project which target is a product / system concept.

Qualifications

Basics of 3-D modeling and technical drawings, basic knowledge of material technology. You are able to make workshop- and assembly drawings.

Assessment criteria, satisfactory (1)

Adequate (1): You can identify the basic knowledge and terminology but can only sufficiently apply them to simple product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in adequate way
- You are familiar with the basic project management tools in adequate way

Satisfactory (2): You are familiar with the basic knowledge and terminology but can only satisfactorily apply them to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in satisfactory way
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in satisfactory way
- You are familiar with the basic project management tools in satisfactory way

Assessment criteria, good (3)

Good (3): You master the essential knowledge and skills and can apply them to product development tasks:
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects
- You can use creative working methods in the innovation and solution of practical problems
- You can choose the right product protection methods of immaterial rights.

Very good (4): You master the essential knowledge and skills and can apply the knowledge acquired in a critical and innovative manner to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects in very good level
- You can choose the right product protection methods of immaterial rights.

Assessment criteria, excellent (5)

Excellent (5): You master the essential knowledge and skills of the course and can apply the knowledge acquired in a critical and innovative manner to demanding product development tasks
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in excellent way
- You are familiar with the basic project management tools and can implement them in study projects in excellent level
- You can choose the right product protection methods of immaterial rights.

Assessment criteria, approved/failed

The approved course requires that:
- the team-specific training work has been completed with at least grade 1. The team project work is estimated on a grade scale of 0-5.
- the exam must be completed at least with a grade of 1.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

5 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

20 - 25

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Kalevi Jaaranen
Groups
  • TKN23SA
    Konetekniikka (AMK)

Objectives

After completing this course, you will understand the importance of product development for the success of a company. You will learn about the impact of product development on the environment and society, taking into account the principles of sustainable development. In the product development phase, the most significant decisions are made during the product's life cycle, how the product binds energy and natural resources during its life cycle, and how the product is phased out in a controlled and predictable manner through recycling.

You will get the impression that product development is a systematic and process-like activity, starting with customer needs and ending with successful products through product conceptualization. You are also aware of the importance of product protection as part of the operations of a successful company. During the course, you will develop your cooperation skills as an active member of a product development team and also as a possible team leader.

Engineering practice:
You can use appropriate methods in a product development process and develop complicated products, processes and systems.

Multidisciplinary competences:
You will be able to make objective decisions by comparing complex technical and economic solutions, taking into account sustainable development.

Communication and team-working:
You can work as a team member in a productive way. You can do co-operation with your engineer colleagues and bring out your ideas on troubleshooting cases.

Content

Product development. Product development process. Product development projects. Creative working methods. Immaterial rights. Practice project which target is a product / system concept.

Learning materials and recommended literature

Lecture handout

Teaching methods

Lectures, information retrieval and applied learning assigments. Theory lectures and company presentations as recordings. During the face-to-face teaching lessons, the theory and team work of the course will be reviewed. Teamwork and self-learning the group-specific project work.

The responsible and transparent use of AI applications is encouraged in this course. Instructions for using artificial intelligence can be found in chapter 3.2 of the thesis reporting instructions. If necessary, the instructions for each learning assignment contain more detailed information on how to use it in more detail in this course.

Practical training and working life connections

There are 3-5 lessons where technology and engineering companies located to Jyväskylä area will present their company and product development process. Also these companies has an opportunity to present their possibilities of summer training.

Exam dates and retake possibilities

There is exam at the end of the course. Two resits after that based on JAMK orders.

Student workload

Lectures 45 h.
Team exercise work including self-reliant work 90 h.
Total 135 h.

Content scheduling

More theory based lessons at the beginning of the course. Company presentations will start in the middle of the course.
Team exercise will start at the beginning of the course and it will continue through the whole course. At the end of the course there is end seminar for exercise.

Further information for students

On the learning assignments there is continuous developing feedback. The overall assessment consists of 40% of the group project work and 60% of the exam.

Those registered for the course will be removed from the implementation if they have not completed the task announced at the beginning.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You can identify the basic knowledge and terminology but can only sufficiently apply them to simple product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in adequate way
- You are familiar with the basic project management tools in adequate way

Satisfactory (2): You are familiar with the basic knowledge and terminology but can only satisfactorily apply them to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in satisfactory way
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in satisfactory way
- You are familiar with the basic project management tools in satisfactory way

Evaluation criteria, good (3-4)

Good (3): You master the essential knowledge and skills and can apply them to product development tasks:
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects
- You can use creative working methods in the innovation and solution of practical problems
- You can choose the right product protection methods of immaterial rights.

Very good (4): You master the essential knowledge and skills and can apply the knowledge acquired in a critical and innovative manner to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects in very good level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, excellent (5)

Excellent (5): You master the essential knowledge and skills of the course and can apply the knowledge acquired in a critical and innovative manner to demanding product development tasks
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in excellent way
- You are familiar with the basic project management tools and can implement them in study projects in excellent level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, pass/failed

The approved course requires that:
- the team-specific training work has been completed with at least grade 1. The team project work is estimated on a grade scale of 0-5.
- the exam must be completed at least with a grade of 1.

Prerequisites

Basics of 3-D modeling and technical drawings, basic knowledge of material technology. You are able to make workshop- and assembly drawings.

Enrollment

18.11.2024 - 09.01.2025

Timing

13.01.2025 - 30.04.2025

Number of ECTS credits allocated

5 op

Virtual portion

2 op

Mode of delivery

60 % Face-to-face, 40 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

20 - 32

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Kalevi Jaaranen
Groups
  • TKN23SM
    Konetekniikka (AMK)

Objectives

After completing this course, you will understand the importance of product development for the success of a company. You will learn about the impact of product development on the environment and society, taking into account the principles of sustainable development. In the product development phase, the most significant decisions are made during the product's life cycle, how the product binds energy and natural resources during its life cycle, and how the product is phased out in a controlled and predictable manner through recycling.

You will get the impression that product development is a systematic and process-like activity, starting with customer needs and ending with successful products through product conceptualization. You are also aware of the importance of product protection as part of the operations of a successful company. During the course, you will develop your cooperation skills as an active member of a product development team and also as a possible team leader.

Engineering practice:
You can use appropriate methods in a product development process and develop complicated products, processes and systems.

Multidisciplinary competences:
You will be able to make objective decisions by comparing complex technical and economic solutions, taking into account sustainable development.

Communication and team-working:
You can work as a team member in a productive way. You can do co-operation with your engineer colleagues and bring out your ideas on troubleshooting cases.

Content

Product development. Product development process. Product development projects. Creative working methods. Immaterial rights. Practice project which target is a product / system concept.

Learning materials and recommended literature

Lecture handout

Teaching methods

Lectures, information retrieval and applied learning assigments. Theory lectures and company presentations as recordings. During the face-to-face teaching lessons, the theory and team work of the course will be reviewed. Teamwork and self-learning the group-specific project work.

The responsible and transparent use of AI applications is encouraged in this course. Instructions for using artificial intelligence can be found in chapter 3.2 of the thesis reporting instructions. If necessary, the instructions for each learning assignment contain more detailed information on how to use it in more detail in this course.

Practical training and working life connections

There are 3-5 lessons where technology and engineering companies located to Jyväskylä area will present their company and product development process. Also these companies has an opportunity to present their possibilities of summer training.

Exam dates and retake possibilities

There is exam at the end of the course. Two resits after that based on JAMK orders.

Student workload

Lectures 14 h.
Team exercise work including self-reliant work 121 h.
Total 135 h.

Content scheduling

More theory based lessons at the beginning of the course. Company presentations will start in the middle of the course.
Team exercise will start at the beginning of the course and it will continue through the whole course. At the end of the course there is end seminar for exercise.

Further information for students

On the learning assignments there is continuous developing feedback. The overall assessment consists of 40% of the group project work and 60% of the exam.

Those registered for the course will be removed from the implementation if they have not completed the task announced at the beginning.

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You can identify the basic knowledge and terminology but can only sufficiently apply them to simple product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in adequate way
- You are familiar with the basic project management tools in adequate way

Satisfactory (2): You are familiar with the basic knowledge and terminology but can only satisfactorily apply them to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in satisfactory way
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in satisfactory way
- You are familiar with the basic project management tools in satisfactory way

Evaluation criteria, good (3-4)

Good (3): You master the essential knowledge and skills and can apply them to product development tasks:
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects
- You can use creative working methods in the innovation and solution of practical problems
- You can choose the right product protection methods of immaterial rights.

Very good (4): You master the essential knowledge and skills and can apply the knowledge acquired in a critical and innovative manner to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects in very good level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, excellent (5)

Excellent (5): You master the essential knowledge and skills of the course and can apply the knowledge acquired in a critical and innovative manner to demanding product development tasks
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in excellent way
- You are familiar with the basic project management tools and can implement them in study projects in excellent level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, pass/failed

The approved course requires that:
- the team-specific training work has been completed with at least grade 1. The team project work is estimated on a grade scale of 0-5.
- the exam must be completed at least with a grade of 1.

Prerequisites

Basics of 3-D modeling and technical drawings, basic knowledge of material technology. You are able to make workshop- and assembly drawings.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 30.04.2024

Number of ECTS credits allocated

5 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 24

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Kalevi Jaaranen
Groups
  • TKN22SA
    Konetekniikka (AMK)

Objectives

After completing this course, you will understand the importance of product development for the success of a company. You will learn about the impact of product development on the environment and society, taking into account the principles of sustainable development. In the product development phase, the most significant decisions are made during the product's life cycle, how the product binds energy and natural resources during its life cycle, and how the product is phased out in a controlled and predictable manner through recycling.

You will get the impression that product development is a systematic and process-like activity, starting with customer needs and ending with successful products through product conceptualization. You are also aware of the importance of product protection as part of the operations of a successful company. During the course, you will develop your cooperation skills as an active member of a product development team and also as a possible team leader.

Engineering practice:
You can use appropriate methods in a product development process and develop complicated products, processes and systems.

Multidisciplinary competences:
You will be able to make objective decisions by comparing complex technical and economic solutions, taking into account sustainable development.

Communication and team-working:
You can work as a team member in a productive way. You can do co-operation with your engineer colleagues and bring out your ideas on troubleshooting cases.

Content

Product development. Product development process. Product development projects. Creative working methods. Immaterial rights. Practice project which target is a product / system concept.

Learning materials and recommended literature

Lecture handout

Teaching methods

Weekly lessons consists of theory of the course.
Team project work and self learning.

Practical training and working life connections

There are 3-5 lessons where technology and engineering companies located to Jyväskylä area will present their company and product development process. Also these companies has an opportunity to present their possibilities of summer training.

Exam dates and retake possibilities

There is exam at the end of the course. Two resits after that based on JAMK orders.

Student workload

Lectures 45 h.
Team exercise work including self-reliant work 90 h.
Total 135 h.

Content scheduling

More theory based lessons at the beginning of the course. Company presentations will start in the middle of the course.
Team exercise will start at the beginning of the course and it will continue through the whole course. At the end of the course there is end seminar for exercise.

Further information for students

-

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You can identify the basic knowledge and terminology but can only sufficiently apply them to simple product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in adequate way
- You are familiar with the basic project management tools in adequate way

Satisfactory (2): You are familiar with the basic knowledge and terminology but can only satisfactorily apply them to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in satisfactory way
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in satisfactory way
- You are familiar with the basic project management tools in satisfactory way

Evaluation criteria, good (3-4)

Good (3): You master the essential knowledge and skills and can apply them to product development tasks:
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects
- You can use creative working methods in the innovation and solution of practical problems
- You can choose the right product protection methods of immaterial rights.

Very good (4): You master the essential knowledge and skills and can apply the knowledge acquired in a critical and innovative manner to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects in very good level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, excellent (5)

Excellent (5): You master the essential knowledge and skills of the course and can apply the knowledge acquired in a critical and innovative manner to demanding product development tasks
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in excellent way
- You are familiar with the basic project management tools and can implement them in study projects in excellent level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, pass/failed

The approved course requires that:
- the team-specific training work has been completed with at least grade 1. The team project work is estimated on a grade scale of 0-5.
- the exam must be completed at least with a grade of 1.

Prerequisites

Basics of 3-D modeling and technical drawings, basic knowledge of material technology. You are able to make workshop- and assembly drawings.

Enrollment

20.11.2023 - 04.01.2024

Timing

08.01.2024 - 20.05.2024

Number of ECTS credits allocated

5 op

Virtual portion

3 op

Mode of delivery

40 % Face-to-face, 60 % Online learning

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 38

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Kalevi Jaaranen
Groups
  • TKN22SM
    Konetekniikka (AMK)

Objectives

After completing this course, you will understand the importance of product development for the success of a company. You will learn about the impact of product development on the environment and society, taking into account the principles of sustainable development. In the product development phase, the most significant decisions are made during the product's life cycle, how the product binds energy and natural resources during its life cycle, and how the product is phased out in a controlled and predictable manner through recycling.

You will get the impression that product development is a systematic and process-like activity, starting with customer needs and ending with successful products through product conceptualization. You are also aware of the importance of product protection as part of the operations of a successful company. During the course, you will develop your cooperation skills as an active member of a product development team and also as a possible team leader.

Engineering practice:
You can use appropriate methods in a product development process and develop complicated products, processes and systems.

Multidisciplinary competences:
You will be able to make objective decisions by comparing complex technical and economic solutions, taking into account sustainable development.

Communication and team-working:
You can work as a team member in a productive way. You can do co-operation with your engineer colleagues and bring out your ideas on troubleshooting cases.

Content

Product development. Product development process. Product development projects. Creative working methods. Immaterial rights. Practice project which target is a product / system concept.

Learning materials and recommended literature

Lecture handout

Teaching methods

Weekly lessons consists of theory of the course.
Team project work and self learning.

Practical training and working life connections

There are 3-5 lessons where technology and engineering companies located to Jyväskylä area will present their company and product development process. Also these companies has an opportunity to present their possibilities of summer training.

Exam dates and retake possibilities

There is exam at the end of the course. Two resits after that based on JAMK orders.

Student workload

Lectures 15 h.
Team exercise work including self-reliant work 120 h.
Total 135 h.

Content scheduling

More theory based lessons at the beginning of the course. Company presentations will start in the middle of the course.
Team exercise will start at the beginning of the course and it will continue through the whole course. At the end of the course there is end seminar for exercise.

Further information for students

-

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You can identify the basic knowledge and terminology but can only sufficiently apply them to simple product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in adequate way
- You are familiar with the basic project management tools in adequate way

Satisfactory (2): You are familiar with the basic knowledge and terminology but can only satisfactorily apply them to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in satisfactory way
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in satisfactory way
- You are familiar with the basic project management tools in satisfactory way

Evaluation criteria, good (3-4)

Good (3): You master the essential knowledge and skills and can apply them to product development tasks:
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects
- You can use creative working methods in the innovation and solution of practical problems
- You can choose the right product protection methods of immaterial rights.

Very good (4): You master the essential knowledge and skills and can apply the knowledge acquired in a critical and innovative manner to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects in very good level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, excellent (5)

Excellent (5): You master the essential knowledge and skills of the course and can apply the knowledge acquired in a critical and innovative manner to demanding product development tasks
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in excellent way
- You are familiar with the basic project management tools and can implement them in study projects in excellent level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, pass/failed

The approved course requires that:
- the team-specific training work has been completed with at least grade 1. The team project work is estimated on a grade scale of 0-5.
- the exam must be completed at least with a grade of 1.

Prerequisites

Basics of 3-D modeling and technical drawings, basic knowledge of material technology. You are able to make workshop- and assembly drawings.

Enrollment

01.11.2022 - 05.01.2023

Timing

01.01.2023 - 21.05.2023

Number of ECTS credits allocated

5 op

Mode of delivery

Face-to-face

Unit

School of Technology

Campus

Main Campus

Teaching languages
  • Finnish
Seats

0 - 60

Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Kalevi Jaaranen
  • Janne Lappi
Teacher in charge

Janne Lappi

Groups
  • TKN21SA
    Konetekniikka (AMK)
  • TKN21SM
    Konetekniikka

Objectives

After completing this course, you will understand the importance of product development for the success of a company. You will learn about the impact of product development on the environment and society, taking into account the principles of sustainable development. In the product development phase, the most significant decisions are made during the product's life cycle, how the product binds energy and natural resources during its life cycle, and how the product is phased out in a controlled and predictable manner through recycling.

You will get the impression that product development is a systematic and process-like activity, starting with customer needs and ending with successful products through product conceptualization. You are also aware of the importance of product protection as part of the operations of a successful company. During the course, you will develop your cooperation skills as an active member of a product development team and also as a possible team leader.

Engineering practice:
You can use appropriate methods in a product development process and develop complicated products, processes and systems.

Multidisciplinary competences:
You will be able to make objective decisions by comparing complex technical and economic solutions, taking into account sustainable development.

Communication and team-working:
You can work as a team member in a productive way. You can do co-operation with your engineer colleagues and bring out your ideas on troubleshooting cases.

Content

Product development. Product development process. Product development projects. Creative working methods. Immaterial rights. Practice project which target is a product / system concept.

Learning materials and recommended literature

Lecture handout

Teaching methods

Weekly lessons consists of theory of the course.
Team project work and self learning.

Practical training and working life connections

There are 3-5 lessons where technology and engineering companies located to Jyväskylä area will present their company and product development process. Also these companies has an opportunity to present their possibilities of summer training.

Exam dates and retake possibilities

There is exam at the end of the course. Two resits after that based on JAMK orders.

Student workload

Lectures 60 h.
Team exercise work including self-reliant work 75 h.
Total 135 h.

Content scheduling

More theory based lessons at the beginning of the course. Company presentations will start in the middle of the course.
Team exercise will start at the beginning of the course and it will continue through the whole course. At the end of the course there is end seminar for exercise.

Further information for students

-

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You can identify the basic knowledge and terminology but can only sufficiently apply them to simple product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in adequate way
- You are familiar with the basic project management tools in adequate way

Satisfactory (2): You are familiar with the basic knowledge and terminology but can only satisfactorily apply them to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in satisfactory way
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in satisfactory way
- You are familiar with the basic project management tools in satisfactory way

Evaluation criteria, good (3-4)

Good (3): You master the essential knowledge and skills and can apply them to product development tasks:
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects
- You can use creative working methods in the innovation and solution of practical problems
- You can choose the right product protection methods of immaterial rights.

Very good (4): You master the essential knowledge and skills and can apply the knowledge acquired in a critical and innovative manner to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects in very good level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, excellent (5)

Excellent (5): You master the essential knowledge and skills of the course and can apply the knowledge acquired in a critical and innovative manner to demanding product development tasks
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in excellent way
- You are familiar with the basic project management tools and can implement them in study projects in excellent level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, pass/failed

The approved course requires that:
- the team-specific training work has been completed with at least grade 1. The team project work is estimated on a grade scale of 0-5.
- the exam must be completed at least with a grade of 1.

Prerequisites

Basics of 3-D modeling and technical drawings, basic knowledge of material technology. You are able to make workshop- and assembly drawings.

Enrollment

01.11.2021 - 09.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

5 op

Mode of delivery

Face-to-face

Unit

School of Technology

Teaching languages
  • Finnish
Degree programmes
  • Bachelor's Degree Programme in Mechanical Engineering
Teachers
  • Janne Lappi
Groups
  • TKN20SA
    Konetekniikka (AMK)
  • TKN20SM
    Konetekniikka

Objectives

After completing this course, you will understand the importance of product development for the success of a company. You will learn about the impact of product development on the environment and society, taking into account the principles of sustainable development. In the product development phase, the most significant decisions are made during the product's life cycle, how the product binds energy and natural resources during its life cycle, and how the product is phased out in a controlled and predictable manner through recycling.

You will get the impression that product development is a systematic and process-like activity, starting with customer needs and ending with successful products through product conceptualization. You are also aware of the importance of product protection as part of the operations of a successful company. During the course, you will develop your cooperation skills as an active member of a product development team and also as a possible team leader.

Engineering practice:
You can use appropriate methods in a product development process and develop complicated products, processes and systems.

Multidisciplinary competences:
You will be able to make objective decisions by comparing complex technical and economic solutions, taking into account sustainable development.

Communication and team-working:
You can work as a team member in a productive way. You can do co-operation with your engineer colleagues and bring out your ideas on troubleshooting cases.

Content

Product development. Product development process. Product development projects. Creative working methods. Immaterial rights. Practice project which target is a product / system concept.

Learning materials and recommended literature

Lecture handout

Teaching methods

Weekly lessons consists of theory of the course.
Team project work and self learning.

Practical training and working life connections

There are 3-5 lessons where technology and engineering companies located to Jyväskylä area will present their company and product development process. Also these companies has an opportunity to present their possibilities of summer training.

Exam dates and retake possibilities

There is exam at the end of the course. Two resits after that based on JAMK orders.

Student workload

Lectures 60 h.
Team exercise work including self-reliant work 75 h.
Total 135 h.

Content scheduling

More theory based lessons at the beginning of the course. Company presentations will start in the middle of the course.
Team exercise will start at the beginning of the course and it will continue through the whole course. At the end of the course there is end seminar for exercise.

Further information for students

-

Evaluation scale

0-5

Evaluation criteria, satisfactory (1-2)

Adequate (1): You can identify the basic knowledge and terminology but can only sufficiently apply them to simple product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in adequate way
- You are familiar with the basic project management tools in adequate way

Satisfactory (2): You are familiar with the basic knowledge and terminology but can only satisfactorily apply them to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company in satisfactory way
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in satisfactory way
- You are familiar with the basic project management tools in satisfactory way

Evaluation criteria, good (3-4)

Good (3): You master the essential knowledge and skills and can apply them to product development tasks:
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects
- You can use creative working methods in the innovation and solution of practical problems
- You can choose the right product protection methods of immaterial rights.

Very good (4): You master the essential knowledge and skills and can apply the knowledge acquired in a critical and innovative manner to product development tasks.
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market
- You are familiar with the basic project management tools and can implement them in study projects in very good level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, excellent (5)

Excellent (5): You master the essential knowledge and skills of the course and can apply the knowledge acquired in a critical and innovative manner to demanding product development tasks
- You can explain the significance of the product development and innovation process among the other processes in a company
- You are familiar with different types of product development processes and can describe their progress from a product idea to a finished product in the market in excellent way
- You are familiar with the basic project management tools and can implement them in study projects in excellent level
- You can choose the right product protection methods of immaterial rights.

Evaluation criteria, pass/failed

The approved course requires that:
- the team-specific training work has been completed with at least grade 1. The team project work is estimated on a grade scale of 0-5.
- the exam must be completed at least with a grade of 1.

Prerequisites

Basics of 3-D modeling and technical drawings, basic knowledge of material technology. You are able to make workshop- and assembly drawings.