Intralogistics PlanningLaajuus (5 cr)
Code: TLSS3500
Credits
5 op
Teaching language
- Finnish
Responsible person
- Henri Kervola
Objective
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Qualifications
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.
Assessment criteria, satisfactory (1)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Assessment criteria, good (3)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Assessment criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Enrollment
18.11.2024 - 09.01.2025
Timing
13.01.2025 - 31.05.2025
Number of ECTS credits allocated
5 op
Virtual portion
2.5 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
20 - 60
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Henri Kervola
Groups
-
TLS22S1Logistiikka - tutkinto-ohjelma (AMK)
-
UTIVERKKOInstitute of New Industry, online learning (mechanical, logistics and civil engineering)
Objectives
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Learning materials and recommended literature
Kuvataan oppimisympäristössä. Haetaan opintojaksolta.
Teaching methods
The course is based on the design of a logistics centre in groups. The course includes implementation for day students and implementation for distance learning students. The course is conducted in Finnish. The first assignment of the course must be returned within three weeks of the start of the course. Non-returners will be removed from the course.
Exam dates and retake possibilities
The course does not include an exam.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Evaluation criteria, good (3-4)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Evaluation criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Prerequisites
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.
Enrollment
01.08.2024 - 22.08.2024
Timing
20.08.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 15
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Henri Kervola
Groups
-
UTIVERKKOInstitute of New Industry, online learning (mechanical, logistics and civil engineering)
Objectives
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Learning materials and recommended literature
Kuvataan oppimisympäristössä. Haetaan opintojaksolta.
Teaching methods
The course is based on the design of a logistics center in groups. The course is primarily an online course for distance learning students, which does not involve any contact lessons, but you will receive help and feedback from the teacher. The first assignment of the course must be done within three weeks of the first few days. Those who fail to complete the assignment will be removed from the course.
Exam dates and retake possibilities
The course does not include an exam.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Evaluation criteria, good (3-4)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Evaluation criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Prerequisites
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.
Enrollment
20.11.2023 - 04.01.2024
Timing
08.01.2024 - 19.05.2024
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 15
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Henri Kervola
Groups
-
UTIVERKKOInstitute of New Industry, online learning (mechanical, logistics and civil engineering)
Objectives
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Learning materials and recommended literature
Kuvataan oppimisympäristössä. Haetaan opintojaksolta.
Teaching methods
Opintojakso rakentuu ryhmissä tehtävän logistiikkakeskuksen suunnittelun varaan. Toteutus on ensisijaisesti monimuoto-opiskelijoille suunnattu verkkototeutus, joka ei sisällä yhteisiä kontakteja, mutta suunnitteluun saa apua ja palautetta opettajalta.
Exam dates and retake possibilities
Opintojakso ei sisällä tenttiä.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Evaluation criteria, good (3-4)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Evaluation criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Prerequisites
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.
Enrollment
20.11.2023 - 04.01.2024
Timing
08.01.2024 - 30.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Henri Kervola
Groups
-
TLS21S1Logistiikan tutkinto-ohjelma (AMK)
Objectives
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Learning materials and recommended literature
Kuvataan oppimisympäristössä. Haetaan opintojaksolta.
Teaching methods
The course is based on the engineering of a logistics center in groups. The implementation includes lectures to assist in the design project, both in theory and in practice.
Exam dates and retake possibilities
Opintojakso ei sisällä tenttiä.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Evaluation criteria, good (3-4)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Evaluation criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Prerequisites
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.
Enrollment
01.08.2023 - 24.08.2023
Timing
23.08.2023 - 19.12.2023
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 15
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Henri Kervola
Groups
-
UTIVERKKOInstitute of New Industry, online learning (mechanical, logistics and civil engineering)
Objectives
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Learning materials and recommended literature
Kuvataan oppimisympäristössä. Haetaan opintojaksolta.
Teaching methods
Opintojakso rakentuu ryhmissä tehtävän logistiikkakeskuksen suunnittelun varaan. Toteutus on ensisijaisesti monimuoto-opiskelijoille suunnattu verkkototeutus, joka ei sisällä yhteisiä kontakteja, mutta suunnitteluun saa apua ja palautetta opettajalta.
Exam dates and retake possibilities
Opintojakso ei sisällä tenttiä.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Evaluation criteria, good (3-4)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Evaluation criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Prerequisites
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 19.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 20
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Sisä1 Logistiikka
- Jeremias Pirinen
Teacher in charge
Henri Kervola
Groups
-
TLS20S1Bachelor's Degree Programme in Logistics
Objectives
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Learning materials and recommended literature
Kuvataan oppimisympäristössä. Haetaan opintojaksolta.
Teaching methods
The course is based on the engineering of a logistics center in groups. The implementation includes lectures to assist in the design project, both in theory and in practice.
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Evaluation criteria, good (3-4)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Evaluation criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Prerequisites
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 19.05.2023
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 25
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Henri Kervola
Teacher in charge
Henri Kervola
Groups
-
LOGRAKVERKKOLogistiikan ja rakentamisen verkko-opetus
-
TLS20KMBachelor's Degree Programme in Logistics
Objectives
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Learning materials and recommended literature
Kuvataan oppimisympäristössä. Haetaan opintojaksolta.
Teaching methods
The course is based on the engineering of a logistics center in groups. The implementation does not include common contacts, but help and feedback from the teacher is provided for the planning.
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Evaluation criteria, good (3-4)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Evaluation criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Prerequisites
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 21.12.2022
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 5
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Henri Kervola
Teacher in charge
Henri Kervola
Groups
-
LOGRAKVERKKOLogistiikan ja rakentamisen verkko-opetus
Objectives
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Learning materials and recommended literature
Kuvataan oppimisympäristössä. Haetaan opintojaksolta.
Teaching methods
The course is based on the engineering of a logistics center in groups. The implementation does not include common contacts, but help and feedback from the teacher is provided for the planning.
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Evaluation criteria, good (3-4)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Evaluation criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Prerequisites
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.
Enrollment
01.03.2022 - 31.05.2022
Timing
01.03.2022 - 31.08.2022
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 10
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Henri Kervola
Teacher in charge
Henri Kervola
Groups
-
LOGAKTIIVILogistiikan aktiivitoteutukset
Objectives
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Learning materials and recommended literature
Kuvataan oppimisympäristössä. Haetaan opintojaksolta.
Teaching methods
-distance learning
-small group learning
-exercises
-learning tasks
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Evaluation criteria, good (3-4)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Evaluation criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Prerequisites
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.
Enrollment
01.10.2021 - 28.02.2022
Timing
01.10.2021 - 31.05.2022
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 10
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Henri Kervola
Teacher in charge
Henri Kervola
Groups
-
TLS19KMBachelor's Degree Programme in Logistics
-
LOGAKTIIVILogistiikan aktiivitoteutukset
Objectives
Purpose
Do you know how to plan logistics center or extension to current one? Which kind of things you have to decide and take into account? Intralogistics planning course gives answers to these questions. You learn to think planning from persons, money, functions and safety point of view.
Competences
Intralogistics and engineering practice
Learning outcome
By completing this course, you will understand how to do calculations and analysis of the planning. You will also know how to do layout planning and choose reasonable technologies and estimate needed amount of personnel. You can also do cost calculations of the planning project and take issues relating to planning, e.g. sustainability and safety, into account.
Content
1. Calculations and analysis of planning
2. Layout planning
3. Choosing technologies and amount of personnel
4. Cost calculations of project
5. Things to be considered in planning
Learning materials and recommended literature
Kuvataan oppimisympäristössä. Haetaan opintojaksolta.
Teaching methods
-distance learning
-small group learning
-exercises
-learning tasks
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Evaluation criteria, good (3-4)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills one has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills one has learned.
Evaluation criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills one has learned.
Prerequisites
Learning which is described in World of Logistics, Intralogistics and Intralogistics management.