Project LogisticsLaajuus (5 cr)
Code: TLKK1500
Credits
5 op
Teaching language
- Finnish
Responsible person
- Risto Pakarinen
Objective
Purpose of the course
Industrial investment, expansion of production and relocation of new facilities are just few example where you need project logistics expertise. Project is a wide network of players combined with dynamic operating environment with a tight schedule. Project logistics course combines the project planning phase, material flow management, utilization of specialized transportation, lifting services and other project-supporting performance areas into one efficient entity. In this course you will learn the basics of project management and carry out your own specific project where you already utilize your previous logistical skills and learn the basics of project management.
Competences:
This course develops and assesses the following know-how: transportation skills, engineering practice, multidisciplinary competences, communication and team working
Learning outcomes:
You will learn the basics of project planning, understand requirements what successful project demands for logistics and understand the importance of specialty transportation, lifting services, and other project-supporting transportation as part of the whole project. You will learn and understand the importance of communication and information accuracy as part of a successful project.
Content
During the course you will study the following topics:
- Project Management Basics
- Project material flows and transportation
- Special transportation as part of project logistics
- Lifting services as part of project logistics
- Project management
Qualifications
Logistics basis
Transportation modes
Assessment criteria, satisfactory (1)
Adequate1:
The student achieves all the subjects described in the course objectives.
Satisfactory 2:
The student achieves all the topics described in the course objectives and is able to identify technical solutions that influence the project material flow and transportation.
Assessment criteria, good (3)
Good 3:
The student achieves all the topics described in the course objectives and understands the basic business and financial impacts of project logistics.
Very good 4:
The student achieves all the subjects described in the course objectives and is able to use well-established methods of analysis in decision-making. Students will be aware of financial, organizational and management aspects (such as project management, risk and change management) in industrial and business context.
Assessment criteria, excellent (5)
Excellent 5:
The student achieves the above assessment criteria and is able to analytically self asses the development of his / her own competence during the course.
Enrollment
01.08.2024 - 22.08.2024
Timing
26.08.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Virtual portion
2.5 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
20 - 50
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Kimmo Lehtonen
Groups
-
TLS22S1Logistiikka - tutkinto-ohjelma (AMK)
-
UTIVERKKOInstitute of New Industry, online learning (mechanical, logistics and civil engineering)
Objectives
Purpose of the course
Industrial investment, expansion of production and relocation of new facilities are just few example where you need project logistics expertise. Project is a wide network of players combined with dynamic operating environment with a tight schedule. Project logistics course combines the project planning phase, material flow management, utilization of specialized transportation, lifting services and other project-supporting performance areas into one efficient entity. In this course you will learn the basics of project management and carry out your own specific project where you already utilize your previous logistical skills and learn the basics of project management.
Competences:
This course develops and assesses the following know-how: transportation skills, engineering practice, multidisciplinary competences, communication and team working
Learning outcomes:
You will learn the basics of project planning, understand requirements what successful project demands for logistics and understand the importance of specialty transportation, lifting services, and other project-supporting transportation as part of the whole project. You will learn and understand the importance of communication and information accuracy as part of a successful project.
Content
During the course you will study the following topics:
- Project Management Basics
- Project material flows and transportation
- Special transportation as part of project logistics
- Lifting services as part of project logistics
- Project management
Learning materials and recommended literature
Lecture materials
ISBN: 978-951-830-485-5 Tavaraliikenneyrittäjä, JAMK
978-952-67201-1-1 Projektihallinnan käsikirja
978-952-5753-950 Microsoft Project 2013 : käytön perusteet (verkkojulkaisu, pdf)
Lecture materials related to the course can be found in the course workspace. Relevant open-source online material can also be used.
Teaching methods
This course includes lectures and learning assignments and project work. Some of the assignment are done as independent work, some during contact teaching. The assignments are described in the course workspace. All assignments are either independent or group work (as described in course workspace) and due dates are confirmed as the course progresses
The use of artificial intelligence is allowed in the course. The course will follow JAMK's values, ethical principles and good scientific practice in the use of AI software.
Practical training and working life connections
Virtual excursions and visitor lectures
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practi
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation
Further information for students
Avoin AMK: Ei rajoituksia
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate1:
The student achieves all the subjects described in the course objectives.
Satisfactory 2:
The student achieves all the topics described in the course objectives and is able to identify technical solutions that influence the project material flow and transportation.
Evaluation criteria, good (3-4)
Good 3:
The student achieves all the topics described in the course objectives and understands the basic business and financial impacts of project logistics.
Very good 4:
The student achieves all the subjects described in the course objectives and is able to use well-established methods of analysis in decision-making. Students will be aware of financial, organizational and management aspects (such as project management, risk and change management) in industrial and business context.
Evaluation criteria, excellent (5)
Excellent 5:
The student achieves the above assessment criteria and is able to analytically self asses the development of his / her own competence during the course.
Prerequisites
Logistics basis
Transportation modes
Enrollment
20.11.2023 - 04.01.2024
Timing
08.01.2024 - 19.05.2024
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 20
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Risto Pakarinen
Groups
-
UTIVERKKOInstitute of New Industry, online learning (mechanical, logistics and civil engineering)
Objectives
Purpose of the course
Industrial investment, expansion of production and relocation of new facilities are just few example where you need project logistics expertise. Project is a wide network of players combined with dynamic operating environment with a tight schedule. Project logistics course combines the project planning phase, material flow management, utilization of specialized transportation, lifting services and other project-supporting performance areas into one efficient entity. In this course you will learn the basics of project management and carry out your own specific project where you already utilize your previous logistical skills and learn the basics of project management.
Competences:
This course develops and assesses the following know-how: transportation skills, engineering practice, multidisciplinary competences, communication and team working
Learning outcomes:
You will learn the basics of project planning, understand requirements what successful project demands for logistics and understand the importance of specialty transportation, lifting services, and other project-supporting transportation as part of the whole project. You will learn and understand the importance of communication and information accuracy as part of a successful project.
Content
During the course you will study the following topics:
- Project Management Basics
- Project material flows and transportation
- Special transportation as part of project logistics
- Lifting services as part of project logistics
- Project management
Learning materials and recommended literature
Lecture materials
ISBN: 978-951-830-485-5 Tavaraliikenneyrittäjä, JAMK
978-952-67201-1-1 Projektihallinnan käsikirja
978-952-5753-950 Microsoft Project 2013 : käytön perusteet (verkkojulkaisu, pdf)
Lecture materials related to the course can be found in the course workspace. Relevant open-source online material can also be used.
Teaching methods
This course includes lectures and learning assignments and project work. Some of the assignment are done as independent work, some during contact teaching. The assignments are described in the course workspace. All assignments are either independent or group work (as described in course workspace) and due dates are confirmed as the course progresses
Practical training and working life connections
Virtual excursions and visitor lectures
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practi
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation
Further information for students
Avoin AMK: Ei rajoituksia
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate1:
The student achieves all the subjects described in the course objectives.
Satisfactory 2:
The student achieves all the topics described in the course objectives and is able to identify technical solutions that influence the project material flow and transportation.
Evaluation criteria, good (3-4)
Good 3:
The student achieves all the topics described in the course objectives and understands the basic business and financial impacts of project logistics.
Very good 4:
The student achieves all the subjects described in the course objectives and is able to use well-established methods of analysis in decision-making. Students will be aware of financial, organizational and management aspects (such as project management, risk and change management) in industrial and business context.
Evaluation criteria, excellent (5)
Excellent 5:
The student achieves the above assessment criteria and is able to analytically self asses the development of his / her own competence during the course.
Prerequisites
Logistics basis
Transportation modes
Enrollment
01.08.2023 - 24.08.2023
Timing
28.08.2023 - 19.12.2023
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 20
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Risto Pakarinen
Groups
-
UTIVERKKOInstitute of New Industry, online learning (mechanical, logistics and civil engineering)
Objectives
Purpose of the course
Industrial investment, expansion of production and relocation of new facilities are just few example where you need project logistics expertise. Project is a wide network of players combined with dynamic operating environment with a tight schedule. Project logistics course combines the project planning phase, material flow management, utilization of specialized transportation, lifting services and other project-supporting performance areas into one efficient entity. In this course you will learn the basics of project management and carry out your own specific project where you already utilize your previous logistical skills and learn the basics of project management.
Competences:
This course develops and assesses the following know-how: transportation skills, engineering practice, multidisciplinary competences, communication and team working
Learning outcomes:
You will learn the basics of project planning, understand requirements what successful project demands for logistics and understand the importance of specialty transportation, lifting services, and other project-supporting transportation as part of the whole project. You will learn and understand the importance of communication and information accuracy as part of a successful project.
Content
During the course you will study the following topics:
- Project Management Basics
- Project material flows and transportation
- Special transportation as part of project logistics
- Lifting services as part of project logistics
- Project management
Learning materials and recommended literature
Lecture materials
ISBN: 978-951-830-485-5 Tavaraliikenneyrittäjä, JAMK
978-952-67201-1-1 Projektihallinnan käsikirja
978-952-5753-950 Microsoft Project 2013 : käytön perusteet (verkkojulkaisu, pdf)
Lecture materials related to the course can be found in the course workspace. Relevant open-source online material can also be used.
Teaching methods
This course includes lectures and learning assignments and project work. Some of the assignment are done as independent work, some during contact teaching. The assignments are described in the course workspace. All assignments are either independent or group work (as described in course workspace) and due dates are confirmed as the course progresses
Practical training and working life connections
Virtual excursions and visitor lectures
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation
Further information for students
Avoin AMK: Ei rajoituksia
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate1:
The student achieves all the subjects described in the course objectives.
Satisfactory 2:
The student achieves all the topics described in the course objectives and is able to identify technical solutions that influence the project material flow and transportation.
Evaluation criteria, good (3-4)
Good 3:
The student achieves all the topics described in the course objectives and understands the basic business and financial impacts of project logistics.
Very good 4:
The student achieves all the subjects described in the course objectives and is able to use well-established methods of analysis in decision-making. Students will be aware of financial, organizational and management aspects (such as project management, risk and change management) in industrial and business context.
Evaluation criteria, excellent (5)
Excellent 5:
The student achieves the above assessment criteria and is able to analytically self asses the development of his / her own competence during the course.
Prerequisites
Logistics basis
Transportation modes
Enrollment
01.08.2023 - 24.08.2023
Timing
28.08.2023 - 19.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Risto Pakarinen
Groups
-
TLS21S1Logistiikan tutkinto-ohjelma (AMK)
Objectives
Purpose of the course
Industrial investment, expansion of production and relocation of new facilities are just few example where you need project logistics expertise. Project is a wide network of players combined with dynamic operating environment with a tight schedule. Project logistics course combines the project planning phase, material flow management, utilization of specialized transportation, lifting services and other project-supporting performance areas into one efficient entity. In this course you will learn the basics of project management and carry out your own specific project where you already utilize your previous logistical skills and learn the basics of project management.
Competences:
This course develops and assesses the following know-how: transportation skills, engineering practice, multidisciplinary competences, communication and team working
Learning outcomes:
You will learn the basics of project planning, understand requirements what successful project demands for logistics and understand the importance of specialty transportation, lifting services, and other project-supporting transportation as part of the whole project. You will learn and understand the importance of communication and information accuracy as part of a successful project.
Content
During the course you will study the following topics:
- Project Management Basics
- Project material flows and transportation
- Special transportation as part of project logistics
- Lifting services as part of project logistics
- Project management
Time and location
Lecture materials (ISBN/title):
978-951-830-485-5 Tavaraliikenneyrittäjä
978-952-246-401-9 (ebook) Hallittu projekti
978-1-4094-2515-1 (ebook) Managing Project Supply Chain
978-1-4051-5124-5 (ebook) Managing Construction Logistics
Lecture materials related to the course can be found in the course workspace. Relevant open-source online material can also be used.
Learning materials and recommended literature
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Teaching methods
This course includes lectures and learning assignments and project work. Some of the assignment are done as independent work, some during contact teaching. The assignments are described in the course workspace. All assignments are either independent or group work (as described in course workspace) and due dates are confirmed as the course progresses
Practical training and working life connections
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
Excursions and visitor lectures
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation
Further information for students
Avoin AMK: Ei rajoituksia
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate1:
The student achieves all the subjects described in the course objectives.
Satisfactory 2:
The student achieves all the topics described in the course objectives and is able to identify technical solutions that influence the project material flow and transportation.
Evaluation criteria, good (3-4)
Good 3:
The student achieves all the topics described in the course objectives and understands the basic business and financial impacts of project logistics.
Very good 4:
The student achieves all the subjects described in the course objectives and is able to use well-established methods of analysis in decision-making. Students will be aware of financial, organizational and management aspects (such as project management, risk and change management) in industrial and business context.
Evaluation criteria, excellent (5)
Excellent 5:
The student achieves the above assessment criteria and is able to analytically self asses the development of his / her own competence during the course.
Prerequisites
Logistics basis
Transportation modes
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 19.05.2023
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 20
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Risto Pakarinen
Teacher in charge
Risto Pakarinen
Groups
-
LOGRAKVERKKOLogistiikan ja rakentamisen verkko-opetus
Objectives
Purpose of the course
Industrial investment, expansion of production and relocation of new facilities are just few example where you need project logistics expertise. Project is a wide network of players combined with dynamic operating environment with a tight schedule. Project logistics course combines the project planning phase, material flow management, utilization of specialized transportation, lifting services and other project-supporting performance areas into one efficient entity. In this course you will learn the basics of project management and carry out your own specific project where you already utilize your previous logistical skills and learn the basics of project management.
Competences:
This course develops and assesses the following know-how: transportation skills, engineering practice, multidisciplinary competences, communication and team working
Learning outcomes:
You will learn the basics of project planning, understand requirements what successful project demands for logistics and understand the importance of specialty transportation, lifting services, and other project-supporting transportation as part of the whole project. You will learn and understand the importance of communication and information accuracy as part of a successful project.
Content
During the course you will study the following topics:
- Project Management Basics
- Project material flows and transportation
- Special transportation as part of project logistics
- Lifting services as part of project logistics
- Project management
Learning materials and recommended literature
Lecture materials
ISBN: 978-951-830-485-5 Tavaraliikenneyrittäjä, JAMK
978-952-67201-1-1 Projektihallinnan käsikirja
978-952-5753-950 Microsoft Project 2013 : käytön perusteet (verkkojulkaisu, pdf)
Lecture materials related to the course can be found in the course workspace. Relevant open-source online material can also be used.
Teaching methods
This course includes lectures and learning assignments and project work. Some of the assignment are done as independent work, some during contact teaching. The assignments are described in the course workspace. All assignments are either independent or group work (as described in course workspace) and due dates are confirmed as the course progresses
Practical training and working life connections
Virtual excursions and visitor lectures
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation
Further information for students
Avoin AMK: Ei rajoituksia
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate1:
The student achieves all the subjects described in the course objectives.
Satisfactory 2:
The student achieves all the topics described in the course objectives and is able to identify technical solutions that influence the project material flow and transportation.
Evaluation criteria, good (3-4)
Good 3:
The student achieves all the topics described in the course objectives and understands the basic business and financial impacts of project logistics.
Very good 4:
The student achieves all the subjects described in the course objectives and is able to use well-established methods of analysis in decision-making. Students will be aware of financial, organizational and management aspects (such as project management, risk and change management) in industrial and business context.
Evaluation criteria, excellent (5)
Excellent 5:
The student achieves the above assessment criteria and is able to analytically self asses the development of his / her own competence during the course.
Prerequisites
Logistics basis
Transportation modes
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 21.12.2022
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 20
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Risto Pakarinen
Teacher in charge
Risto Pakarinen
Groups
-
LOGRAKVERKKOLogistiikan ja rakentamisen verkko-opetus
Objectives
Purpose of the course
Industrial investment, expansion of production and relocation of new facilities are just few example where you need project logistics expertise. Project is a wide network of players combined with dynamic operating environment with a tight schedule. Project logistics course combines the project planning phase, material flow management, utilization of specialized transportation, lifting services and other project-supporting performance areas into one efficient entity. In this course you will learn the basics of project management and carry out your own specific project where you already utilize your previous logistical skills and learn the basics of project management.
Competences:
This course develops and assesses the following know-how: transportation skills, engineering practice, multidisciplinary competences, communication and team working
Learning outcomes:
You will learn the basics of project planning, understand requirements what successful project demands for logistics and understand the importance of specialty transportation, lifting services, and other project-supporting transportation as part of the whole project. You will learn and understand the importance of communication and information accuracy as part of a successful project.
Content
During the course you will study the following topics:
- Project Management Basics
- Project material flows and transportation
- Special transportation as part of project logistics
- Lifting services as part of project logistics
- Project management
Learning materials and recommended literature
Lecture materials
ISBN: 978-951-830-485-5 Tavaraliikenneyrittäjä, JAMK
978-952-67201-1-1 Projektihallinnan käsikirja
978-952-5753-950 Microsoft Project 2013 : käytön perusteet (verkkojulkaisu, pdf)
Lecture materials related to the course can be found in the course workspace. Relevant open-source online material can also be used.
Teaching methods
This course includes lectures and learning assignments and project work. Some of the assignment are done as independent work, some during contact teaching. The assignments are described in the course workspace. All assignments are either independent or group work (as described in course workspace) and due dates are confirmed as the course progresses
Practical training and working life connections
Virtual excursions and visitor lectures
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation
Further information for students
Avoin AMK: Ei rajoituksia
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate1:
The student achieves all the subjects described in the course objectives.
Satisfactory 2:
The student achieves all the topics described in the course objectives and is able to identify technical solutions that influence the project material flow and transportation.
Evaluation criteria, good (3-4)
Good 3:
The student achieves all the topics described in the course objectives and understands the basic business and financial impacts of project logistics.
Very good 4:
The student achieves all the subjects described in the course objectives and is able to use well-established methods of analysis in decision-making. Students will be aware of financial, organizational and management aspects (such as project management, risk and change management) in industrial and business context.
Evaluation criteria, excellent (5)
Excellent 5:
The student achieves the above assessment criteria and is able to analytically self asses the development of his / her own competence during the course.
Prerequisites
Logistics basis
Transportation modes
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 21.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Face-to-face
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 50
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Risto Pakarinen
Teacher in charge
Risto Pakarinen
Groups
-
TLS20S1Bachelor's Degree Programme in Logistics
Objectives
Purpose of the course
Industrial investment, expansion of production and relocation of new facilities are just few example where you need project logistics expertise. Project is a wide network of players combined with dynamic operating environment with a tight schedule. Project logistics course combines the project planning phase, material flow management, utilization of specialized transportation, lifting services and other project-supporting performance areas into one efficient entity. In this course you will learn the basics of project management and carry out your own specific project where you already utilize your previous logistical skills and learn the basics of project management.
Competences:
This course develops and assesses the following know-how: transportation skills, engineering practice, multidisciplinary competences, communication and team working
Learning outcomes:
You will learn the basics of project planning, understand requirements what successful project demands for logistics and understand the importance of specialty transportation, lifting services, and other project-supporting transportation as part of the whole project. You will learn and understand the importance of communication and information accuracy as part of a successful project.
Content
During the course you will study the following topics:
- Project Management Basics
- Project material flows and transportation
- Special transportation as part of project logistics
- Lifting services as part of project logistics
- Project management
Learning materials and recommended literature
Lecture materials
ISBN: 978-951-830-485-5 Tavaraliikenneyrittäjä, JAMK
978-952-67201-1-1 Projektihallinnan käsikirja
978-952-5753-950 Microsoft Project 2013 : käytön perusteet (verkkojulkaisu, pdf)
Lecture materials related to the course can be found in the course workspace. Relevant open-source online material can also be used.
Teaching methods
This course includes lectures and learning assignments and project work. Some of the assignment are done as independent work, some during contact teaching. The assignments are described in the course workspace. All assignments are either independent or group work (as described in course workspace) and due dates are confirmed as the course progresses
Practical training and working life connections
Virtual excursions and visitor lectures
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation
Further information for students
Avoin AMK: Ei rajoituksia
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate1:
The student achieves all the subjects described in the course objectives.
Satisfactory 2:
The student achieves all the topics described in the course objectives and is able to identify technical solutions that influence the project material flow and transportation.
Evaluation criteria, good (3-4)
Good 3:
The student achieves all the topics described in the course objectives and understands the basic business and financial impacts of project logistics.
Very good 4:
The student achieves all the subjects described in the course objectives and is able to use well-established methods of analysis in decision-making. Students will be aware of financial, organizational and management aspects (such as project management, risk and change management) in industrial and business context.
Evaluation criteria, excellent (5)
Excellent 5:
The student achieves the above assessment criteria and is able to analytically self asses the development of his / her own competence during the course.
Prerequisites
Logistics basis
Transportation modes
Enrollment
01.10.2021 - 28.02.2022
Timing
01.10.2021 - 31.05.2022
Number of ECTS credits allocated
5 op
Virtual portion
5 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 5
Degree programmes
- Bachelor's Degree Programme in Logistics
Teachers
- Risto Pakarinen
Teacher in charge
Risto Pakarinen
Groups
-
ZJA21STAvoin AMK, tekniikka
-
LOGAKTIIVILogistiikan aktiivitoteutukset
-
ZJA22KTAvoin AMK, tekniikka
Objectives
Purpose of the course
Industrial investment, expansion of production and relocation of new facilities are just few example where you need project logistics expertise. Project is a wide network of players combined with dynamic operating environment with a tight schedule. Project logistics course combines the project planning phase, material flow management, utilization of specialized transportation, lifting services and other project-supporting performance areas into one efficient entity. In this course you will learn the basics of project management and carry out your own specific project where you already utilize your previous logistical skills and learn the basics of project management.
Competences:
This course develops and assesses the following know-how: transportation skills, engineering practice, multidisciplinary competences, communication and team working
Learning outcomes:
You will learn the basics of project planning, understand requirements what successful project demands for logistics and understand the importance of specialty transportation, lifting services, and other project-supporting transportation as part of the whole project. You will learn and understand the importance of communication and information accuracy as part of a successful project.
Content
During the course you will study the following topics:
- Project Management Basics
- Project material flows and transportation
- Special transportation as part of project logistics
- Lifting services as part of project logistics
- Project management
Learning materials and recommended literature
Lecture materials
ISBN: 978-951-830-485-5 Tavaraliikenneyrittäjä, JAMK
978-952-67201-1-1 Projektihallinnan käsikirja
978-952-5753-950 Microsoft Project 2013 : käytön perusteet (verkkojulkaisu, pdf)
Lecture materials related to the course can be found in the course workspace. Relevant open-source online material can also be used.
Teaching methods
This course includes lectures and learning assignments and project work. Some of the assignment are done as independent work, some during contact teaching. The assignments are described in the course workspace. All assignments are either independent or group work (as described in course workspace) and due dates are confirmed as the course progresses
Practical training and working life connections
Virtual excursions and visitor lectures
Exam dates and retake possibilities
The possible date and method of the exam will be announced in the course opening information.
Alternative completion methods
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation
Further information for students
Avoin AMK: Ei rajoituksia
Evaluation scale
0-5
Evaluation criteria, satisfactory (1-2)
Adequate1:
The student achieves all the subjects described in the course objectives.
Satisfactory 2:
The student achieves all the topics described in the course objectives and is able to identify technical solutions that influence the project material flow and transportation.
Evaluation criteria, good (3-4)
Good 3:
The student achieves all the topics described in the course objectives and understands the basic business and financial impacts of project logistics.
Very good 4:
The student achieves all the subjects described in the course objectives and is able to use well-established methods of analysis in decision-making. Students will be aware of financial, organizational and management aspects (such as project management, risk and change management) in industrial and business context.
Evaluation criteria, excellent (5)
Excellent 5:
The student achieves the above assessment criteria and is able to analytically self asses the development of his / her own competence during the course.
Prerequisites
Logistics basis
Transportation modes