Electrical SafetyLaajuus (5 cr)
Code: TSASS630
Credits
5 op
Teaching language
- Finnish
Responsible person
- Pasi Puttonen
Objective
You will become familiar with electrical safety regulations and learn to operate within them. Studying in this course requires previously acquired basic knowledge of electrical power and installation technology. After completing this course, you will be prepared to complete the Electrical Safety Degree 1, which is required when applying for an Electrical Qualification 1. In addition to a degree in electrical safety, obtaining a certificate of competence requires work experience and a degree (eg a bachelor's engineer). The electrical safety degree is valid for 5 years. Electrical qualifications are required of electrical work and operation managers.
EUR-ACE ENGINEERING PRACTICE
You know the electrical safety regulations and know how to act within them. You know how electrical installations are designed and carried out safely (according to standards). You can e.g. choose the right protective equipment for different destinations.
EUR-ACE MULTIDISCIPLINARY EXPERTISE
You understand the multidimensionality of the electricity industry and understand that it has a strong effect on e.g. safety, the environment and the economy, as well as the great responsibility. You recognize that the industry is constantly evolving and changing and you are ready to develop your skills accordingly.
Content
Electrical Safety Act
Government regulations on electrical safety
TUKES instructions
According to standards SFS 6000 (Low voltage electrical installations), SFS 6001 (high voltage electrical installations) and SFS 6002 (Electrical safety).
Qualifications
Basic knowledge of electric power and installation technology
Assessment criteria, approved/failed
Passed: The second part of the official electrical safety degree prepared by TUKES has been passed and at least 50% of the assignments have been completed. In addition, approved electrical safety training is required.
Enrollment
01.11.2024 - 09.01.2025
Timing
13.01.2025 - 18.05.2025
Number of ECTS credits allocated
5 op
Virtual portion
3 op
Mode of delivery
40 % Face-to-face, 60 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Pasi Puttonen
- Vesa Hytönen
Groups
-
TSA23KMSInsinööri (AMK), sähkö- ja automaatiotekniikka,monimuototeutus
-
ZJA25KTSAPAvoin amk, Sähköpätevyys, monimuoto
Objectives
You will become familiar with electrical safety regulations and learn to operate within them. Studying in this course requires previously acquired basic knowledge of electrical power and installation technology. After completing this course, you will be prepared to complete the Electrical Safety Degree 1, which is required when applying for an Electrical Qualification 1. In addition to a degree in electrical safety, obtaining a certificate of competence requires work experience and a degree (eg a bachelor's engineer). The electrical safety degree is valid for 5 years. Electrical qualifications are required of electrical work and operation managers.
EUR-ACE ENGINEERING PRACTICE
You know the electrical safety regulations and know how to act within them. You know how electrical installations are designed and carried out safely (according to standards). You can e.g. choose the right protective equipment for different destinations.
EUR-ACE MULTIDISCIPLINARY EXPERTISE
You understand the multidimensionality of the electricity industry and understand that it has a strong effect on e.g. safety, the environment and the economy, as well as the great responsibility. You recognize that the industry is constantly evolving and changing and you are ready to develop your skills accordingly.
Content
Electrical Safety Act
Government regulations on electrical safety
TUKES instructions
According to standards SFS 6000 (Low voltage electrical installations), SFS 6001 (high voltage electrical installations) and SFS 6002 (Electrical safety).
Learning materials and recommended literature
“Electrical Safety Regulations 1" Exam material, lecture material (Moodle), special recommendations: D1-käsikirja rakennusten sähköasennuksista (Finnish)
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons.
Exam dates and retake possibilities
TUKES S1 exam (spring 2025)
Course exam (spring 2025)
Alternative completion methods
Exercises, electrical safety card exam and exam
Student workload
The total calculated workload for a student is 135 hours of coursework.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Passed: The second part of the official electrical safety degree prepared by TUKES has been passed and at least 50% of the assignments have been completed. In addition, approved electrical safety training is required.
Prerequisites
Basic knowledge of electric power and installation technology
Enrollment
01.08.2023 - 22.08.2024
Timing
26.08.2024 - 18.12.2024
Number of ECTS credits allocated
5 op
Virtual portion
3 op
Mode of delivery
40 % Face-to-face, 60 % Online learning
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Pasi Puttonen
- Vesa Hytönen
Groups
-
TSA22SSSähkö- ja automaatiotekniikka (AMK)
-
ZJA24STSAPAvoin amk, Sähköpätevyys, monimuoto
Objectives
You will become familiar with electrical safety regulations and learn to operate within them. Studying in this course requires previously acquired basic knowledge of electrical power and installation technology. After completing this course, you will be prepared to complete the Electrical Safety Degree 1, which is required when applying for an Electrical Qualification 1. In addition to a degree in electrical safety, obtaining a certificate of competence requires work experience and a degree (eg a bachelor's engineer). The electrical safety degree is valid for 5 years. Electrical qualifications are required of electrical work and operation managers.
EUR-ACE ENGINEERING PRACTICE
You know the electrical safety regulations and know how to act within them. You know how electrical installations are designed and carried out safely (according to standards). You can e.g. choose the right protective equipment for different destinations.
EUR-ACE MULTIDISCIPLINARY EXPERTISE
You understand the multidimensionality of the electricity industry and understand that it has a strong effect on e.g. safety, the environment and the economy, as well as the great responsibility. You recognize that the industry is constantly evolving and changing and you are ready to develop your skills accordingly.
Content
Electrical Safety Act
Government regulations on electrical safety
TUKES instructions
According to standards SFS 6000 (Low voltage electrical installations), SFS 6001 (high voltage electrical installations) and SFS 6002 (Electrical safety).
Learning materials and recommended literature
“Electrical Safety Regulations 1" Exam material, lecture material (Moodle), special recommendations: D1-käsikirja rakennusten sähköasennuksista (Finnish)
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons.
Exam dates and retake possibilities
TUKES S1 exam (autumn 2024)
Course exam (autumn 2024)
Alternative completion methods
Exercises, electrical safety card exam and exam
Student workload
The total calculated workload for a student is 135 hours of coursework.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Passed: The second part of the official electrical safety degree prepared by TUKES has been passed and at least 50% of the assignments have been completed. In addition, approved electrical safety training is required.
Prerequisites
Basic knowledge of electric power and installation technology
Enrollment
20.11.2023 - 04.01.2024
Timing
01.01.2024 - 19.05.2024
Number of ECTS credits allocated
5 op
Virtual portion
3 op
Mode of delivery
40 % Face-to-face, 60 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Pasi Puttonen
- Vesa Hytönen
Groups
-
TSA22KMSSähkö- ja automaatiotekniikka (AMK)
Objectives
You will become familiar with electrical safety regulations and learn to operate within them. Studying in this course requires previously acquired basic knowledge of electrical power and installation technology. After completing this course, you will be prepared to complete the Electrical Safety Degree 1, which is required when applying for an Electrical Qualification 1. In addition to a degree in electrical safety, obtaining a certificate of competence requires work experience and a degree (eg a bachelor's engineer). The electrical safety degree is valid for 5 years. Electrical qualifications are required of electrical work and operation managers.
EUR-ACE ENGINEERING PRACTICE
You know the electrical safety regulations and know how to act within them. You know how electrical installations are designed and carried out safely (according to standards). You can e.g. choose the right protective equipment for different destinations.
EUR-ACE MULTIDISCIPLINARY EXPERTISE
You understand the multidimensionality of the electricity industry and understand that it has a strong effect on e.g. safety, the environment and the economy, as well as the great responsibility. You recognize that the industry is constantly evolving and changing and you are ready to develop your skills accordingly.
Content
Electrical Safety Act
Government regulations on electrical safety
TUKES instructions
According to standards SFS 6000 (Low voltage electrical installations), SFS 6001 (high voltage electrical installations) and SFS 6002 (Electrical safety).
Learning materials and recommended literature
“Electrical Safety Regulations 1" Exam material, lecture material (Moodle), special recommendations: D1-käsikirja rakennusten sähköasennuksista (Finnish)
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons.
Exam dates and retake possibilities
TUKES S1 exam (spring 2024)
Course exam (spring 2024)
Resit (autumn 2024)
Alternative completion methods
Exercises, electrical safety card exam and exam
Student workload
Total 135 h
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Passed: The second part of the official electrical safety degree prepared by TUKES has been passed and at least 50% of the assignments have been completed. In addition, approved electrical safety training is required.
Prerequisites
Basic knowledge of electric power and installation technology
Enrollment
01.08.2023 - 24.08.2023
Timing
01.08.2023 - 31.12.2023
Number of ECTS credits allocated
5 op
Virtual portion
2 op
Mode of delivery
60 % Face-to-face, 40 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Pasi Puttonen
- Vesa Hytönen
Groups
-
TSA21SBSähkö- ja automaatiotekniikka (AMK)
Objectives
You will become familiar with electrical safety regulations and learn to operate within them. Studying in this course requires previously acquired basic knowledge of electrical power and installation technology. After completing this course, you will be prepared to complete the Electrical Safety Degree 1, which is required when applying for an Electrical Qualification 1. In addition to a degree in electrical safety, obtaining a certificate of competence requires work experience and a degree (eg a bachelor's engineer). The electrical safety degree is valid for 5 years. Electrical qualifications are required of electrical work and operation managers.
EUR-ACE ENGINEERING PRACTICE
You know the electrical safety regulations and know how to act within them. You know how electrical installations are designed and carried out safely (according to standards). You can e.g. choose the right protective equipment for different destinations.
EUR-ACE MULTIDISCIPLINARY EXPERTISE
You understand the multidimensionality of the electricity industry and understand that it has a strong effect on e.g. safety, the environment and the economy, as well as the great responsibility. You recognize that the industry is constantly evolving and changing and you are ready to develop your skills accordingly.
Content
Electrical Safety Act
Government regulations on electrical safety
TUKES instructions
According to standards SFS 6000 (Low voltage electrical installations), SFS 6001 (high voltage electrical installations) and SFS 6002 (Electrical safety).
Learning materials and recommended literature
“Electrical Safety Regulations 1" Exam material, lecture material (Moodle), special recommendations: D1-käsikirja rakennusten sähköasennuksista (Finnish)
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons.
Exam dates and retake possibilities
TUKES S1 exam (16.11.2023)
Resit 1 (autumn 2023)
Resit 2 (autumn 2023)
Alternative completion methods
Exercises, electrical safety card exam and exam
Student workload
Total 135 h
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Passed: The second part of the official electrical safety degree prepared by TUKES has been passed and at least 50% of the assignments have been completed. In addition, approved electrical safety training is required.
Prerequisites
Basic knowledge of electric power and installation technology
Enrollment
01.11.2022 - 05.01.2023
Timing
09.01.2023 - 21.05.2023
Number of ECTS credits allocated
5 op
Virtual portion
2 op
Mode of delivery
60 % Face-to-face, 40 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Pasi Puttonen
- Vesa Hytönen
Groups
-
TSA21KMBSähkö- ja automaatiotekniikka (AMK)
Objectives
You will become familiar with electrical safety regulations and learn to operate within them. Studying in this course requires previously acquired basic knowledge of electrical power and installation technology. After completing this course, you will be prepared to complete the Electrical Safety Degree 1, which is required when applying for an Electrical Qualification 1. In addition to a degree in electrical safety, obtaining a certificate of competence requires work experience and a degree (eg a bachelor's engineer). The electrical safety degree is valid for 5 years. Electrical qualifications are required of electrical work and operation managers.
EUR-ACE ENGINEERING PRACTICE
You know the electrical safety regulations and know how to act within them. You know how electrical installations are designed and carried out safely (according to standards). You can e.g. choose the right protective equipment for different destinations.
EUR-ACE MULTIDISCIPLINARY EXPERTISE
You understand the multidimensionality of the electricity industry and understand that it has a strong effect on e.g. safety, the environment and the economy, as well as the great responsibility. You recognize that the industry is constantly evolving and changing and you are ready to develop your skills accordingly.
Content
Electrical Safety Act
Government regulations on electrical safety
TUKES instructions
According to standards SFS 6000 (Low voltage electrical installations), SFS 6001 (high voltage electrical installations) and SFS 6002 (Electrical safety).
Learning materials and recommended literature
“Electrical Safety Regulations 1" Exam material, lecture material (Moodle), special recommendations: D1-käsikirja rakennusten sähköasennuksista (Finnish)
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons.
Exam dates and retake possibilities
TUKES S1 exam (spring 2023)
Course exam (spring 2023)
Resit (autumn 2023)
Alternative completion methods
Exercises, electrical safety card exam and exam
Student workload
Total 135 h
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Passed: The second part of the official electrical safety degree prepared by TUKES has been passed and at least 50% of the assignments have been completed. In addition, approved electrical safety training is required.
Prerequisites
Basic knowledge of electric power and installation technology
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 31.12.2022
Number of ECTS credits allocated
5 op
Virtual portion
2 op
Mode of delivery
60 % Face-to-face, 40 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
20 - 50
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Pasi Puttonen
- Vesa Hytönen
Groups
-
TSA20SBBachelor's Degree Programme in Electrical and Automation Engineering
Objectives
You will become familiar with electrical safety regulations and learn to operate within them. Studying in this course requires previously acquired basic knowledge of electrical power and installation technology. After completing this course, you will be prepared to complete the Electrical Safety Degree 1, which is required when applying for an Electrical Qualification 1. In addition to a degree in electrical safety, obtaining a certificate of competence requires work experience and a degree (eg a bachelor's engineer). The electrical safety degree is valid for 5 years. Electrical qualifications are required of electrical work and operation managers.
EUR-ACE ENGINEERING PRACTICE
You know the electrical safety regulations and know how to act within them. You know how electrical installations are designed and carried out safely (according to standards). You can e.g. choose the right protective equipment for different destinations.
EUR-ACE MULTIDISCIPLINARY EXPERTISE
You understand the multidimensionality of the electricity industry and understand that it has a strong effect on e.g. safety, the environment and the economy, as well as the great responsibility. You recognize that the industry is constantly evolving and changing and you are ready to develop your skills accordingly.
Content
Electrical Safety Act
Government regulations on electrical safety
TUKES instructions
According to standards SFS 6000 (Low voltage electrical installations), SFS 6001 (high voltage electrical installations) and SFS 6002 (Electrical safety).
Learning materials and recommended literature
“Electrical Safety Regulations 1" Exam material, lecture material (Moodle), special recommendations: D1-käsikirja rakennusten sähköasennuksista (Finnish)
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of the learning tasks is guided by the video instructions and during the contact lessons.
Exam dates and retake possibilities
TUKES S1 exam (17.11.2022)
Resit 1 (autumn 2022)
Resit 2 (autumn 2022)
Alternative completion methods
Exercises, electrical safety card exam and exam
Student workload
Total 135 h
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks and the skills demonstrated in the exam.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
Passed: The second part of the official electrical safety degree prepared by TUKES has been passed and at least 50% of the assignments have been completed. In addition, approved electrical safety training is required.
Prerequisites
Basic knowledge of electric power and installation technology