Lighting DesignLaajuus (2 cr)
Code: TSAR0640
Credits
2 op
Teaching language
- Finnish
Responsible person
- Vesa Hytönen
Objective
You are familiar with a standard which is used in Finland and elsewhere in the European Union in lighting designing. You are familiar with the basic quantities and definitions of lighting technology and, together with space-specific lighting requirements, are able to apply them in creating and analyzing lighting modeling. This course provides the skills needed to begin lighting design.
EUR-ACE ENGINEERING PRACTICE
You know the basic operation of the software used in professional lighting design. You will be able to do lighting modeling with the software and evaluate the compliance and quality of the modeling.
EA-CT COMMUNICATION AND TEAM-WORKING
You have the ability to communicate about lighting design with others. You will be able to evaluate the quality of other students 'lighting models and also utilize other students' development suggestions for your own modeling.
Content
Introduction to standard lighting modeling
Introduction to lighting design software
Lighting requirements and modeling of the illuminated space
Selection and placement of luminaires
Review and analysis of lighting modeling results
Qualifications
Basic knowledge of electrical engineering
Assessment criteria, approved/failed
To pass this course you need to know the basics of standard lighting design. You will be able to create lighting models and analyze them. You have also been involved in evaluating the quality of other students’ modeling and taking into account development suggestions related to your own modeling.
Enrollment
01.11.2024 - 09.01.2025
Timing
13.01.2025 - 28.02.2025
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- Finnish
Seats
20 - 60
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA22SSSähkö- ja automaatiotekniikka (AMK)
-
TSA22SASähkö- ja automaatiotekniikka (AMK)
Objectives
You are familiar with a standard which is used in Finland and elsewhere in the European Union in lighting designing. You are familiar with the basic quantities and definitions of lighting technology and, together with space-specific lighting requirements, are able to apply them in creating and analyzing lighting modeling. This course provides the skills needed to begin lighting design.
EUR-ACE ENGINEERING PRACTICE
You know the basic operation of the software used in professional lighting design. You will be able to do lighting modeling with the software and evaluate the compliance and quality of the modeling.
EA-CT COMMUNICATION AND TEAM-WORKING
You have the ability to communicate about lighting design with others. You will be able to evaluate the quality of other students 'lighting models and also utilize other students' development suggestions for your own modeling.
Content
Introduction to standard lighting modeling
Introduction to lighting design software
Lighting requirements and modeling of the illuminated space
Selection and placement of luminaires
Review and analysis of lighting modeling results
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
The learning method used is problem-based learning. Concretely, learning takes place through learning tasks that are completed and returned independently. The completion of the learning tasks will be guided by video tutorials and tutorial lessons.
Alternative completion methods
The procedures for admission are described in the Degree Regulations and the Study Guide. The course tutor will provide further information on any specific procedures for the course.
Student workload
The total calculated workload for a student is 54 hours of coursework.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the learning tasks to be returned.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know the basics of standard lighting design. You will be able to create lighting models and analyze them. You have also been involved in evaluating the quality of other students’ modeling and taking into account development suggestions related to your own modeling.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.08.2024 - 22.08.2024
Timing
26.08.2024 - 18.12.2024
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 35
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA22KMASähkö- ja automaatiotekniikka (AMK)
-
TSA22KMSSähkö- ja automaatiotekniikka (AMK)
Objectives
You are familiar with a standard which is used in Finland and elsewhere in the European Union in lighting designing. You are familiar with the basic quantities and definitions of lighting technology and, together with space-specific lighting requirements, are able to apply them in creating and analyzing lighting modeling. This course provides the skills needed to begin lighting design.
EUR-ACE ENGINEERING PRACTICE
You know the basic operation of the software used in professional lighting design. You will be able to do lighting modeling with the software and evaluate the compliance and quality of the modeling.
EA-CT COMMUNICATION AND TEAM-WORKING
You have the ability to communicate about lighting design with others. You will be able to evaluate the quality of other students 'lighting models and also utilize other students' development suggestions for your own modeling.
Content
Introduction to standard lighting modeling
Introduction to lighting design software
Lighting requirements and modeling of the illuminated space
Selection and placement of luminaires
Review and analysis of lighting modeling results
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
The learning method used is problem-based learning. Concretely, learning takes place through learning tasks that are completed and returned independently. The completion of the learning tasks will be guided by video tutorials and tutorial lessons.
Alternative completion methods
The procedures for admission are described in the Degree Regulations and the Study Guide. The course tutor will provide further information on any specific procedures for the course.
Student workload
The total calculated workload for a student is 54 hours of coursework.
Further information for students
All course assignments must be completed in order to receive a pass.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know the basics of standard lighting design. You will be able to create lighting models and analyze them. You have also been involved in evaluating the quality of other students’ modeling and taking into account development suggestions related to your own modeling.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
20.11.2023 - 04.01.2024
Timing
08.01.2024 - 03.03.2024
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Lutakko Campus
Teaching languages
- Finnish
Seats
0 - 60
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA21SASähkö- ja automaatiotekniikka (AMK)
-
TSA21SBSähkö- ja automaatiotekniikka (AMK)
Objectives
You are familiar with a standard which is used in Finland and elsewhere in the European Union in lighting designing. You are familiar with the basic quantities and definitions of lighting technology and, together with space-specific lighting requirements, are able to apply them in creating and analyzing lighting modeling. This course provides the skills needed to begin lighting design.
EUR-ACE ENGINEERING PRACTICE
You know the basic operation of the software used in professional lighting design. You will be able to do lighting modeling with the software and evaluate the compliance and quality of the modeling.
EA-CT COMMUNICATION AND TEAM-WORKING
You have the ability to communicate about lighting design with others. You will be able to evaluate the quality of other students 'lighting models and also utilize other students' development suggestions for your own modeling.
Content
Introduction to standard lighting modeling
Introduction to lighting design software
Lighting requirements and modeling of the illuminated space
Selection and placement of luminaires
Review and analysis of lighting modeling results
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of learning tasks is guided by the video instructions and during the campus lessons.
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know the basics of standard lighting design. You will be able to create lighting models and analyze them. You have also been involved in evaluating the quality of other students’ modeling and taking into account development suggestions related to your own modeling.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.08.2023 - 24.08.2023
Timing
28.08.2023 - 19.12.2023
Number of ECTS credits allocated
2 op
Virtual portion
1 op
Mode of delivery
50 % Face-to-face, 50 % Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA21KMBSähkö- ja automaatiotekniikka (AMK)
-
TSA21KMASähkö- ja automaatiotekniikka (AMK)
Objectives
You are familiar with a standard which is used in Finland and elsewhere in the European Union in lighting designing. You are familiar with the basic quantities and definitions of lighting technology and, together with space-specific lighting requirements, are able to apply them in creating and analyzing lighting modeling. This course provides the skills needed to begin lighting design.
EUR-ACE ENGINEERING PRACTICE
You know the basic operation of the software used in professional lighting design. You will be able to do lighting modeling with the software and evaluate the compliance and quality of the modeling.
EA-CT COMMUNICATION AND TEAM-WORKING
You have the ability to communicate about lighting design with others. You will be able to evaluate the quality of other students 'lighting models and also utilize other students' development suggestions for your own modeling.
Content
Introduction to standard lighting modeling
Introduction to lighting design software
Lighting requirements and modeling of the illuminated space
Selection and placement of luminaires
Review and analysis of lighting modeling results
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of learning tasks is guided by the video instructions and during the tutoring classes.
Practical training and working life connections
Responsible person of the course is authorized to hold the title of DIALux Certified Trainer.
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know the basics of standard lighting design. You will be able to create lighting models and analyze them. You have also been involved in evaluating the quality of other students’ modeling and taking into account development suggestions related to your own modeling.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
01.11.2022 - 05.01.2023
Timing
20.03.2023 - 30.04.2023
Number of ECTS credits allocated
2 op
Virtual portion
2 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
TSA20SABachelor's Degree Programme in Electrical and Automation Engineering
-
TSA20SBBachelor's Degree Programme in Electrical and Automation Engineering
Objectives
You are familiar with a standard which is used in Finland and elsewhere in the European Union in lighting designing. You are familiar with the basic quantities and definitions of lighting technology and, together with space-specific lighting requirements, are able to apply them in creating and analyzing lighting modeling. This course provides the skills needed to begin lighting design.
EUR-ACE ENGINEERING PRACTICE
You know the basic operation of the software used in professional lighting design. You will be able to do lighting modeling with the software and evaluate the compliance and quality of the modeling.
EA-CT COMMUNICATION AND TEAM-WORKING
You have the ability to communicate about lighting design with others. You will be able to evaluate the quality of other students 'lighting models and also utilize other students' development suggestions for your own modeling.
Content
Introduction to standard lighting modeling
Introduction to lighting design software
Lighting requirements and modeling of the illuminated space
Selection and placement of luminaires
Review and analysis of lighting modeling results
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently fulfilled and returned learning tasks. The completion of learning tasks is guided by the video instructions.
Practical training and working life connections
Responsible person of the course is authorized to hold the title of DIALux Certified Trainer.
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through the learning tasks. The assessment decision is based on the learning tasks.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know the basics of standard lighting design. You will be able to create lighting models and analyze them. You have also been involved in evaluating the quality of other students’ modeling and taking into account development suggestions related to your own modeling.
Prerequisites
Basic knowledge of electrical engineering
Enrollment
02.08.2021 - 05.09.2021
Timing
01.09.2021 - 31.05.2022
Number of ECTS credits allocated
2 op
Virtual portion
2 op
Mode of delivery
Online learning
Unit
School of Technology
Campus
Main Campus
Teaching languages
- Finnish
Seats
0 - 200
Degree programmes
- Bachelor's Degree Programme in Electrical and Automation Engineering
Teachers
- Vesa Hytönen
Groups
-
ZJA21STAvoin AMK, tekniikka
Objectives
You are familiar with a standard which is used in Finland and elsewhere in the European Union in lighting designing. You are familiar with the basic quantities and definitions of lighting technology and, together with space-specific lighting requirements, are able to apply them in creating and analyzing lighting modeling. This course provides the skills needed to begin lighting design.
EUR-ACE ENGINEERING PRACTICE
You know the basic operation of the software used in professional lighting design. You will be able to do lighting modeling with the software and evaluate the compliance and quality of the modeling.
EA-CT COMMUNICATION AND TEAM-WORKING
You have the ability to communicate about lighting design with others. You will be able to evaluate the quality of other students 'lighting models and also utilize other students' development suggestions for your own modeling.
Content
Introduction to standard lighting modeling
Introduction to lighting design software
Lighting requirements and modeling of the illuminated space
Selection and placement of luminaires
Review and analysis of lighting modeling results
Learning materials and recommended literature
Learning environment (Moodle) materials
Teaching methods
Problem-based learning is used as a learning method. Learning takes place through independently performed and returned learning tasks. The completion of learning tasks is guided by video instructions.
Practical training and working life connections
Responsible person of the course is authorized to hold the title of DIALux Certified Trainer.
Student workload
Total study work 54 hours.
Further information for students
Self-assessments are mainly done through learning tasks. The assessment decision is based on the learning tasks.
Evaluation scale
Pass/Fail
Evaluation criteria, pass/failed
To pass this course you need to know the basics of standard lighting design. You will be able to create lighting models and analyze them. You have also been involved in evaluating the quality of other students’ modeling and taking into account development suggestions related to your own modeling.
Prerequisites
Basic knowledge of electrical engineering